Energy stores: efficiency and wasted energy for everyday devices

Pick a device, set the energy going in and see how much is useful and how much is wasted. Works out efficiency and power on a simple energy transfer diagram.

Keep it one tap away for everyday use.

Bookmark Energy stores?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Pick
  2. See
  3. Check
Nothing is uploadedWorks offline once open

Follow the energy

Try this

  • Compare a filament lamp with an LED for the same energy in. Which wastes more?
  • Raise the energy in. Does the efficiency change?
  • On GCSE, shorten the time. What happens to the power?

Check yourself

What it does

Energy is never used up. It moves from one store to another, and some of it always ends up in places we do not want, usually as heat in the surroundings. This tool shows that for a handful of everyday devices. You choose a device and the energy put in, and it draws a simple energy transfer diagram where the width of each arrow matches the amount of energy, then works out how much was useful, how much was wasted and the efficiency.

The efficiencies are rounded typical values for teaching, so a real lamp or engine can differ. To follow energy as it changes form in a moving system, use energy skate track, and for the power side of the story see power and bills and spring energy.

How to use it

  1. Choose a device.
  2. Set the energy supplied in joules.
  3. On GCSE, set the time too to see the power going in and the useful power coming out.
  4. Read the useful and wasted energy and the efficiency, and look at the widths in the diagram.
  5. Answer the questions at the bottom.

What each setting does

  • Device: sets the share of the input that ends up as useful energy.
  • Energy in: the total energy supplied, in joules.
  • Time (GCSE): the seconds over which the energy is supplied. Power is energy divided by time.
  • KS3 / GCSE: KS3 shows the stores and the diagram. GCSE adds efficiency as a percentage and the power values.

Worked example

An electric kettle takes in 1000 J of electrical energy. About 90% goes into heating the water, so the useful output is 900 J and 100 J is wasted, mostly warming the kettle and the air. Efficiency = 900 ÷ 1000 = 0.90, or 90%. If it takes 2 s, the input power is 500 W and the useful power is 450 W. A filament lamp given the same 1000 J turns only about 100 J into light, so 900 J is wasted as heat.

FAQs

Can a device be more than 100% efficient? No. That would create energy, which cannot happen. If a calculation gives more than 100%, a number has been put in the wrong place.

Where does wasted energy go? It spreads out into the surroundings, mostly as thermal energy, which makes it hard to collect and use again.

Is efficiency a percentage or a decimal? Either. 0.90 and 90% are the same. Exams usually accept both if the working is clear.

Why are the values only typical? Real devices differ with age, design and how they are used, so the figures here are only for practising the idea.

Where the numbers come from

  • Efficiency = useful output energy ÷ total input energy: standard school physics. The device efficiencies are rounded typical teaching values, not measurements of any one product, and real devices vary. Drawings are fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-16.

Change log for Energy stores

  1. Renumber UK tools to L327-L329, L338, L339 (gapless) Details on GitHub
  2. UK curriculum: England KS3, GCSE and A-level topic map, pages and 5 gap tools Details on GitHub

Every change to fibub

Related tools