What it does
Density tells you how much matter is packed into a space: density = mass ÷ volume. A steel block and a pine block can be the same size, but the steel one has much more mass, so it is denser.
This lab follows the three methods from the school practical. For a regular block you read its sides from a ruler and multiply to get the volume. For an irregular stone you lower it into a eureka can and the water that spills out into a measuring cylinder is its volume. For a liquid you weigh a measuring cylinder empty and then with liquid in it. Each time the balance gives the mass and the page works out density in g/cm³ and kg/m³. Then you can drop the object in water, oil or syrup to see whether it floats. To go on from here, try floating and buoyancy, liquid pressure and states of matter.
How to use it
- Choose Block, Stone or Liquid.
- Pick a material (or liquid) and press New object for a different size.
- Block: read the three ruler values. Stone: slide it fully into the can and read the overflow. Liquid: set the volume in the cylinder.
- Read the mass on the balance and the density line under the picture.
- Choose a liquid under Drop it in to see if the object floats or sinks.
- Answer the quiz questions, which use new numbers each time.
What each setting does
- Material: what the object is made of. Its true density is hidden in the numbers, so you find it from your measurements.
- Lower the stone: how far the stone is in the can. Only when it is fully in does the overflow equal its volume.
- Liquid in the cylinder: the volume you measure; a bigger sample reduces the percentage uncertainty.
- Drop it in: water, cooking oil or golden syrup.
Worked example
An aluminium block reads 3.0 cm × 4.0 cm × 5.0 cm. Its volume is 3.0 × 4.0 × 5.0 = 60 cm³. The balance reads 162.0 g. The density is 162.0 ÷ 60 = 2.7 g/cm³, which is 2700 kg/m³. In water (1.0 g/cm³) the block sinks, because 2.7 is bigger than 1.0. Pine at 0.55 g/cm³ would float, with about 55 % of it under the surface.
FAQs
Why does 1 mL equal 1 cm³? A millilitre is defined as a cubic centimetre, so the overflow in mL is the stone’s volume in cm³.
Why is the stone’s density slightly off the textbook value? The cylinder reads to 1 mL, so a small stone gives a bigger percentage error. Use a larger stone.
Does a floating object have a different density from a sinking one? Yes: it floats when its density is less than the liquid’s.
Where the numbers come from
- Density = mass / volume and the three standard methods: ruler for a regular solid, eureka (displacement) can for an irregular solid, measuring cylinder and balance for a liquid. Serves the GCSE particle model required practical (density), Ontario Grade 8 fluids and NGSS MS-PS1. Densities used (g/cm3): pine 0.55, ice 0.92, acrylic 1.18, aluminium 2.70, steel 7.85, copper 8.96, sandstone 2.3, granite 2.65, basalt 2.95, oil 0.92, water 1.00, golden syrup 1.38. These are typical rounded values; real samples vary. Checked in tests/curr-physics.mjs. Drawings are fibub's own.
Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.
Last updated 2026-11-16.