Thermodynamics

Class 11 · 180 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Thermodynamics.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The zeroth law of thermodynamics says that if A and B are each in thermal equilibrium with C, then
    1. A and B must be at different temperatures
    2. A and B are in thermal equilibrium with each other
    3. heat flows from A to B
    4. A, B and C have the same mass
    Answer and solution

    Answer: B

    This transitive property is what lets us define temperature: bodies in thermal equilibrium share the same temperature.
  2. MCQWarm-up

    For an ideal gas in an isothermal process, the change in internal energy is
    1. zero
    2. equal to the heat absorbed
    3. equal to the work done by the gas
    4. always positive
    Answer and solution

    Answer: A

    The internal energy of an ideal gas depends only on temperature. If T is constant, ΔU=0, so Q=W.
  3. NATWarm-up

    A gas absorbs 500 J of heat and does 200 J of work. Find the change in its internal energy (in J).
    Answer and solution

    Answer: 300 J

    Q=ΔU+W, so ΔU=500−200=300 J.
  4. MCQWarm-up

    In an adiabatic process
    1. the temperature is constant
    2. the volume is constant
    3. the pressure is constant
    4. no heat enters or leaves the system
    Answer and solution

    Answer: D

    Adiabatic means Q=0. The temperature usually changes: it falls on expansion and rises on compression.
  5. MCQWarm-up

    The work done by a gas in an isochoric (constant volume) process is
    1. nRT
    2. PΔV with ΔV≠0
    3. zero
    4. equal to the heat absorbed
    Answer and solution

    Answer: C

    W=∫PdV and dV=0, so W=0. All the heat goes into internal energy.
  6. NATWarm-up

    A gas expands by 2 litres at a constant pressure of 1.0×105 Pa. Find the work done by the gas (in J).
    Answer and solution

    Answer: 200 J

    W=PΔV=1.0×105×2×10−3=200 J. (2 L = 2×10−3 m3.)
  7. MCQWarm-up

    In one complete cycle of a heat engine, the change in internal energy of the working gas is
    1. equal to the net work done
    2. zero
    3. equal to the net heat absorbed
    4. positive
    Answer and solution

    Answer: B

    The gas returns to its initial state, and U is a state function, so ΔU=0 and net Q= net W.
  8. MCQWarm-up

    Which of the following is a state function?
    1. internal energy
    2. heat
    3. work
    4. heat and work both
    Answer and solution

    Answer: A

    Heat and work depend on the path. Internal energy depends only on the state of the gas.
  9. MCQWarm-up

    The efficiency of a Carnot engine depends on
    1. the working substance
    2. the mass of the gas
    3. the speed of the piston
    4. the temperatures of the source and sink only
    Answer and solution

    Answer: D

    η=1−T2/T1 for any reversible engine working between these temperatures, whatever the working substance.
  10. NATWarm-up

    A Carnot engine works between 600 K and 300 K. Find its efficiency as a percentage.
    Answer and solution

    Answer: 50 %

    η=1−T2/T1=1−300/600=0.5, i.e. 50%.
  11. MCQWarm-up

    The coefficient of performance of a refrigerator is
    1. work done divided by heat removed
    2. heat rejected divided by heat removed
    3. heat removed from the cold space divided by the work done on it
    4. always less than 1
    Answer and solution

    Answer: C

    COP=Q2/W. It can be greater than 1, since the work only moves heat.
  12. MCQWarm-up

    According to the Kelvin-Planck statement, it is impossible to
    1. convert work into heat
    2. convert heat from a single reservoir completely into work in a cyclic process
    3. make a refrigerator
    4. heat a gas at constant pressure
    Answer and solution

    Answer: B

    Turning work into heat is easy (friction). The reverse, in a cycle, always rejects some heat to a colder body.
  13. NATWarm-up

    Find γ=Cp/Cv for a monatomic ideal gas (2 decimals).
    Answer and solution

    Answer: 1.67 (±0.01)

    Cv=32R and Cp=52R, so γ=5/3=1.67.
  14. MCQWarm-up

    Mayer's relation for one mole of an ideal gas is
    1. Cp−Cv=R
    2. Cp+Cv=R
    3. Cp/Cv=R
    4. Cv−Cp=R
    Answer and solution

    Answer: A

    At constant pressure the extra heat RΔT per mole does the expansion work PΔV=RΔT.
  15. MCQWarm-up

    A heat engine that takes heat Q1 from a source and rejects Q2 to a sink has efficiency
    1. Q2/Q1
    2. Q1/Q2
    3. Q1−Q2
    4. 1−Q2/Q1
    Answer and solution

    Answer: D

    Work W=Q1−Q2, so η=W/Q1=1−Q2/Q1.
  16. MCQWarm-up

    On a P-V diagram, at the same point the slope of an adiabatic curve compared to the isothermal curve is
    1. less steep
    2. the same
    3. steeper
    4. opposite in sign
    Answer and solution

    Answer: C

    Isothermal slope =−P/V; adiabatic slope =−γP/V. Since γ>1, the adiabat falls more steeply.
  17. NATStandard

    A gas receives 800 J of heat and its internal energy rises by 500 J. Find the work done by the gas (in J).
    Answer and solution

    Answer: 300 J

    W=Q−ΔU=800−500=300 J, done by the gas.
  18. NATStandard

    One mole of an ideal gas at 300 K expands isothermally to twice its volume. Find the work done by it (in J, nearest whole number). R=8.31 J mol−1K−1.
    Answer and solution

    Answer: 1728 J (±3)

    W=nRTln⁡(V2/V1)=1×8.31×300×ln⁡2=2493×0.6931=1728 J.
  19. NATStandard

    Two moles of an ideal gas are heated at constant pressure so that the temperature rises by 50 K. Find the work done by the gas (in J). R=8.31.
    Answer and solution

    Answer: 831 J (±0.5)

    W=PΔV=nRΔT=2×8.31×50=831 J.
  20. NATStandard

    Find the increase in internal energy (in J) of 1 mole of a monatomic ideal gas heated by 100 K. R=8.31.
    Answer and solution

    Answer: 1246.5 J (±1)

    ΔU=nCvΔT=1×32×8.31×100=1246.5 J. This holds for any process.
  21. NATStandard

    Find Cp for a diatomic gas with rigid molecules (in J mol−1K−1, 1 decimal). R=8.31.
    Answer and solution

    Answer: 29.1 J/mol K (±0.1)

    A rigid diatomic molecule has 5 degrees of freedom: Cv=52R, Cp=Cv+R=72R=3.5×8.31=29.1.
  22. NATStandard

    How much heat (in J, 1 decimal) is needed to raise the temperature of 2 moles of a rigid diatomic gas by 20 K at constant pressure? R=8.31.
    Answer and solution

    Answer: 1163.4 J (±0.5)

    Q=nCpΔT=2×72×8.31×20=1163.4 J.
  23. NATStandard

    One mole of a monatomic ideal gas is compressed adiabatically and its temperature rises from 300 K to 400 K. Find the work done on the gas (in J, 1 decimal). R=8.31.
    Answer and solution

    Answer: 1246.5 J (±0.5)

    Adiabatic: Q=0, so work done on the gas =ΔU=nCvΔT=1×1.5×8.31×100=1246.5 J.
  24. NATStandard

    A Carnot engine has source at 500 K and sink at 300 K. Find its efficiency (%).
    Answer and solution

    Answer: 40 %

    η=1−300/500=0.4=40%.
  25. NATStandard

    An engine of efficiency 25% takes 2000 J of heat from the source in each cycle. Find the work done per cycle (in J).
    Answer and solution

    Answer: 500 J

    W=ηQ1=0.25×2000=500 J. (It rejects the other 1500 J.)
  26. NATStandard

    An ideal refrigerator keeps its inside at 270 K in a room at 300 K. Find its coefficient of performance.
    Answer and solution

    Answer: 9

    COP=T2T1−T2=27030=9.
  27. NATStandard

    An engine absorbs 800 J of heat from a hot body and rejects 600 J to a cold body in each cycle. Find its efficiency (%).
    Answer and solution

    Answer: 25 %

    W=800−600=200 J. η=200/800=25%.
  28. MCQStandard

    For an adiabatic change of an ideal gas with γ=Cp/Cv, which relation is correct?
    1. PV= constant
    2. PVγ= constant
    3. PγV= constant
    4. P/Vγ= constant
    Answer and solution

    Answer: B

    Combining dU=−PdV with PV=nRT gives PVγ= constant. PV= constant is the isothermal law.
  29. NATStandard

    A diatomic gas (γ=1.4) at 1.00 atm is compressed adiabatically to half its volume. Find the final pressure (in atm, 2 decimals).
    Answer and solution

    Answer: 2.64 atm (±0.03)

    P1V1γ=P2V2γ, so P2=P1(V1/V2)1.4=1×21.4=2.64 atm. (An isothermal compression would give only 2 atm.)
  30. NATStandard

    A monatomic gas at 300 K is compressed adiabatically to half its volume. Find its final temperature (in K, 1 decimal).
    Answer and solution

    Answer: 476.2 K (±0.6)

    TVγ−1= constant with γ−1=2/3. T2=300×22/3=300×1.5874=476.2 K.

← All topics