Home / Courses / Medical entrance (NEET) / Practice / Organic chemistry basics (GOC) and isomerism

Organic chemistry basics (GOC) and isomerism

Class 11 · 226 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Organic chemistry basics (GOC) and isomerism.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The IUPAC name of CH3CH(CH3)CH2CH3 is
    1. 2-methylbutane
    2. isopentane
    3. 3-methylbutane
    4. 1,1-dimethylpropane
    Answer and solution

    Answer: A

    Longest chain: 4 carbons (butane). One methyl branch. Number from the end that gives the lower locant: 2.

    Name: 2-methylbutane. "3-methylbutane" numbers from the wrong end; isopentane is a common name.

    Why people get this wrong: Always give the branch the lowest number.

  2. MCQWarm-up

    The functional group in CH3CHO is
    1. ketone, >C=O
    2. aldehyde, –CHO
    3. carboxylic acid, –COOH
    4. ester, –COO–
    Answer and solution

    Answer: B

    A carbonyl group joined to one hydrogen and one carbon is an aldehyde group. A ketone has two carbons on the carbonyl carbon.

  3. MCQWarm-up

    The hybridisation of each carbon in CH2=CH2 is
    1. sp
    2. sp3
    3. sp2
    4. sp3d
    Answer and solution

    Answer: C

    Each carbon forms three sigma bonds (two C–H, one C–C) and one pi bond. Three sigma bonds means three hybrid orbitals: sp2.

  4. MCQWarm-up

    Homolytic fission of a covalent bond gives
    1. carbocation and carbanion
    2. two cations
    3. two anions
    4. free radicals
    Answer and solution

    Answer: D

    In homolysis each atom keeps one electron of the shared pair, so each fragment has an unpaired electron: free radicals. Heterolysis gives a cation and an anion.

  5. MCQWarm-up

    Which of these is an electrophile?
    1. AlCl3
    2. NH3
    3. OH-
    4. H2O
    Answer and solution

    Answer: A

    AlCl3 has an incomplete octet on Al and accepts an electron pair: electrophile (Lewis acid). NH3, OH- and H2O all have lone pairs to donate: nucleophiles.

  6. MCQWarm-up

    Hyperconjugation is also known as
    1. electromeric effect
    2. no-bond resonance
    3. inductive effect
    4. mesomeric effect
    Answer and solution

    Answer: B

    Hyperconjugation is delocalisation of the electrons of a C–H sigma bond into an adjacent empty or pi orbital. Drawn as structures with no bond between C and H, it is called "no-bond resonance" or Baker-Nathan effect.

  7. MCQWarm-up

    In Lassaigne's test, nitrogen is detected as a
    1. violet colour
    2. canary yellow precipitate
    3. Prussian blue colour
    4. white curdy precipitate
    Answer and solution

    Answer: C

    Na fusion gives NaCN. With FeSO4 it forms Na4[Fe(CN)6]; on adding Fe3+ and acid, Prussian blue, Fe4[Fe(CN)6]3, forms. Violet is for sulphur, yellow precipitate for phosphorus, white curdy precipitate for chlorine.

  8. MCQWarm-up

    A carbon atom is chiral (asymmetric) when it is bonded to
    1. four identical groups
    2. two identical and two different groups
    3. a double bond and two groups
    4. four different atoms or groups
    Answer and solution

    Answer: D

    A chiral carbon is sp3 with four different groups. Its mirror image cannot be placed on top of it.

  9. MCQWarm-up

    The most stable carbocation among these is
    1. (CH3)3C+
    2. CH3CH2+
    3. (CH3)2CH+
    4. CH3+
    Answer and solution

    Answer: A

    Stability rises with the number of alkyl groups on the positive carbon (inductive effect and hyperconjugation). Tertiary is the most stable: 9 alpha-hydrogens, three +I groups.

  10. MCQWarm-up

    A liquid that decomposes below its boiling point, such as glycerol, is purified by
    1. simple distillation at atmospheric pressure
    2. distillation under reduced pressure
    3. sublimation
    4. steam distillation of a solid
    Answer and solution

    Answer: B

    Lowering the pressure lowers the boiling point, so the liquid boils before it can decompose.

  11. MCQWarm-up

    The IUPAC name of CH3COOH is
    1. acetic acid, the IUPAC name
    2. methanoic acid
    3. ethanoic acid
    4. ethanal
    Answer and solution

    Answer: C

    Two carbons including the COOH carbon: eth-; the acid ending is –oic acid. Acetic acid is the common name.

  12. MCQWarm-up

    The number of structural isomers of C4H10 is
    1. 1
    2. 3
    3. 4
    4. 2
    Answer and solution

    Answer: D

    Butane (straight chain) and 2-methylpropane (branched). Nothing else is possible for four carbons and ten hydrogens.

  13. MCQWarm-up

    Which group shows a +I (electron-releasing) inductive effect relative to hydrogen?
    1. CH3–
    2. –NO2
    3. –Cl
    4. –CN
    Answer and solution

    Answer: A

    Alkyl groups push electrons towards the carbon they are attached to (+I). NO2, Cl and CN are electron-withdrawing (−I).

  14. MCQWarm-up

    Which species can act as a nucleophile?
    1. BF3
    2. NH3
    3. H+
    4. CH3+
    Answer and solution

    Answer: B

    A nucleophile donates a pair of electrons. NH3 has a lone pair on N. BF3, H+ and CH3+ are electron-poor.

  15. MCQWarm-up

    Ethanol, CH3CH2OH, and methoxymethane, CH3OCH3, are examples of
    1. chain isomers
    2. position isomers
    3. functional isomers
    4. metamers
    Answer and solution

    Answer: C

    Same molecular formula C2H6O but different functional groups (alcohol and ether).

  16. MCQWarm-up

    Which of these is purified by sublimation?
    1. Sodium chloride
    2. Sugar
    3. Glycerol
    4. Naphthalene
    Answer and solution

    Answer: D

    Naphthalene (also camphor, anthracene, ammonium chloride, iodine) goes straight from solid to vapour on heating, leaving non-volatile impurities behind.

  17. MCQWarm-up

    The retention factor Rf of a spot in chromatography can never be
    1. greater than 1
    2. equal to 0.5
    3. equal to 0.1
    4. less than 1
    Answer and solution

    Answer: A

    Rf = distance moved by the substance / distance moved by the solvent front. The substance cannot move further than the solvent, so Rf ≤ 1.

  18. NATWarm-up

    The degree of unsaturation (double-bond equivalents) of benzene, C6H6, is
    Answer and solution

    Answer: 4

    DoU = (2C + 2 − H)/2 = (12 + 2 − 6)/2 = 4 (three double bonds and one ring).

  19. MCQWarm-up

    The IUPAC name of CH3CH2CH(OH)CH3 is
    1. butan-2-ol
    2. butan-3-ol
    3. 1-methylpropan-1-ol
    4. butane-2-ol
    Answer and solution

    Answer: A

    Number to give OH the lowest locant: 2. With the suffix -ol the final e of butane is dropped before the vowel o.

    Name: butan-2-ol.

  20. MCQWarm-up

    The IUPAC name of CH3CH2CONH2 is
    1. propanamine
    2. propanamide
    3. ethanamide
    4. aminopropanone
    Answer and solution

    Answer: B

    Three carbons including the C=O carbon; -amide for CONH2.

    Name: propanamide.

  21. MCQWarm-up

    The IUPAC name of CH3CH2OCH2CH3 is
    1. diethyl oxide
    2. ethylethanol
    3. ethoxyethane
    4. methoxypropane
    Answer and solution

    Answer: C

    Ethers are alkoxyalkanes: the smaller alkyl plus O is the alkoxy group, the larger is the parent.

    Name: ethoxyethane.

  22. MCQStandard

    The IUPAC name of CH3CH2CH(CH3)CH2CH3 is
    1. 2-ethylbutane
    2. 3-methylpentane
    3. 2-methylpentane
    4. 3-methylhexane
    Answer and solution

    Answer: B

    Longest chain is 5 carbons by passing through the CH carbon: C1 CH3, C2 CH2, C3 CH(CH3), C4, C5. The methyl sits on C3. "2-Ethylbutane" picks a shorter chain (4 carbons).

    Why people get this wrong: Always count the longest chain, even if the drawing bends.

  23. MCQStandard

    The IUPAC name of the substituent group CH2=CHCH2– (allyl) is
    1. prop-1-en-3-yl
    2. vinyl
    3. prop-2-en-1-yl
    4. prop-1-en-1-yl
    Answer and solution

    Answer: C

    Number the carbon with the free valence as 1: C1 CH2–, C2 CH=, C3 =CH2. The double bond starts at C2: prop-2-en-1-yl. Vinyl is ethenyl, CH2=CH–.

  24. MCQStandard

    Which order of acidity is correct?
    1. CH3COOH > ClCH2COOH > Cl2CHCOOH > Cl3CCOOH
    2. ClCH2COOH < CH3COOH < Cl2CHCOOH < Cl3CCOOH
    3. CH3COOH < Cl3CCOOH < Cl2CHCOOH < ClCH2COOH
    4. CH3COOH < ClCH2COOH < Cl2CHCOOH < Cl3CCOOH
    Answer and solution

    Answer: D

    Each Cl pulls electrons (−I effect) and stabilises the carboxylate ion, so more Cl atoms mean a stronger acid. pKa: 4.76, 2.86, 1.29, 0.65.

  25. MCQStandard

    Which carbocation is the most stable?
    1. CH2=CHCH2+
    2. CH3CH2CH2+
    3. CH2=CH+
    4. CH3+
    Answer and solution

    Answer: A

    The allyl cation is stabilised by resonance (the charge is shared between two carbons). The vinyl cation has an empty sp orbital at an sp carbon and is very unstable; the methyl cation has no alkyl groups at all.

  26. MCQStandard

    The most stable carbanion among these is
    1. CH3CH2-
    2. CH3-
    3. (CH3)2CH-
    4. (CH3)3C-
    Answer and solution

    Answer: B

    Alkyl groups push electrons towards the negative carbon, making it less stable. So the methyl carbanion (no alkyl groups) is the most stable of the alkyl carbanions: CH3- > 1° > 2° > 3°. This is the reverse of carbocation order.

    Why people get this wrong: Carbanion order is the reverse of carbocation order.

  27. MCQStandard

    The correct order of stability of free radicals is
    1. CH3• > CH3CH2• > (CH3)2CH• > (CH3)3C•
    2. (CH3)2CH• > (CH3)3C• > CH3CH2• > CH3•
    3. (CH3)3C• > (CH3)2CH• > CH3CH2• > CH3•
    4. CH3CH2• > (CH3)2CH• > (CH3)3C• > CH3•
    Answer and solution

    Answer: C

    Alkyl groups stabilise an electron-deficient radical by hyperconjugation and +I, so 3° > 2° > 1° > methyl.

  28. MCQStandard

    Arrange phenol, ethanol, water and acetic acid in decreasing acidity.
    1. C6H5OH > CH3COOH > H2O > C2H5OH
    2. CH3COOH > C6H5OH > C2H5OH > H2O
    3. CH3COOH > H2O > C6H5OH > C2H5OH
    4. CH3COOH > C6H5OH > H2O > C2H5OH
    Answer and solution

    Answer: D

    pKa: acetic acid 4.76, phenol 10, water 15.7, ethanol about 16. The phenoxide ion is stabilised by resonance; the ethoxide ion is destabilised by the +I effect of ethyl.

    Why people get this wrong: Ethanol is a slightly weaker acid than water.

  29. MCQStandard

    In aqueous solution the correct order of basic strength is
    1. (CH3)2NH > CH3NH2 > (CH3)3N > NH3
    2. (CH3)3N > (CH3)2NH > CH3NH2 > NH3
    3. CH3NH2 > (CH3)2NH > (CH3)3N > NH3
    4. NH3 > CH3NH2 > (CH3)2NH > (CH3)3N
    Answer and solution

    Answer: A

    Methyl groups increase electron density on N (+I), but in water the more substituted ammonium ions are less well solvated (fewer N–H for hydrogen bonding). The two effects give 2° > 1° > 3° > NH3 for methylamines (pKb 3.27, 3.38, 4.22, 4.74).

    Why people get this wrong: Tertiary methylamine is not the strongest in water.

  30. MCQStandard

    Which group shows a +M effect (and a −I effect) when attached to a benzene ring?
    1. –NO2
    2. –OCH3
    3. –CHO
    4. –CN
    Answer and solution

    Answer: B

    The oxygen of OCH3 has lone pairs that enter the ring (+M) though O is electronegative and pulls through the sigma bond (−I). NO2, CHO and CN show −M and −I.

← All topics