Amines and diazonium salts
Class 12 · 397 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Amines and diazonium salts.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
CH3CH2NH2 is a- primary amine
- secondary amine
- tertiary amine
- quaternary ammonium salt
Answer and solution
Answer: A
It has one carbon group on nitrogen and two N–H bonds: RNH2, a primary amine.
-
MCQWarm-up
Which of the following is a tertiary amine?- CH3NH2
- (CH3)3N
- (CH3)2NH
- CH3CONH2
Answer and solution
Answer: B
A tertiary amine has three carbon groups on N and no N–H: (CH3)3N. CH3NH2 is primary, (CH3)2NH secondary, and CH3CONH2 is an amide.
-
MCQWarm-up
The nitrogen atom in an amine is- sp2 hybridised and planar with no lone pair
- sp hybridised and linear
- sp3 hybridised, with a lone pair, and the molecule is pyramidal
- sp3 hybridised with no lone pair
Answer and solution
Answer: C
N uses three sp3 orbitals for three bonds, and the fourth holds the lone pair. This gives a pyramidal shape with a C–N–C angle of about 108°.
-
MCQWarm-up
Nitrobenzene on reduction with Sn and conc. HCl, followed by NaOH, gives- phenol
- benzylamine
- azobenzene
- aniline
Answer and solution
Answer: D
Under strongly acidic conditions the nitro group is fully reduced to NH2 (as anilinium chloride; NaOH liberates the free amine).
-
MCQWarm-up
Amines are basic because- the lone pair on nitrogen can accept a proton
- they have an N–H bond that is easily lost as H+
- they contain a C–N double bond
- they contain an OH group
Answer and solution
Answer: A
A base (Lewis or Brønsted) donates a lone pair to H+: RNH2 + H+ → RNH3+.
-
MCQWarm-up
Diazotisation of aniline is carried out at 273–278 K because- aniline freezes above that temperature
- benzenediazonium chloride decomposes at higher temperature, giving phenol and N2
- sodium nitrite is not soluble at room temperature
- HCl evaporates at room temperature
Answer and solution
Answer: B
Arenediazonium salts are only stable in cold solution. Above about 283 K they react with water: C6H5N2+ + H2O → C6H5OH + N2 + H+.
-
MCQWarm-up
The common name of benzenamine is- benzylamine
- toluidine
- aniline
- phenylamine oxide
Answer and solution
Answer: C
C6H5NH2 is benzenamine in IUPAC naming and aniline in common use. Benzylamine is C6H5CH2NH2.
-
MCQWarm-up
The IUPAC or common name of CH3CH2NH2 is- methanamine
- ethylamine oxide
- ethanamine
- N-methylethanamine
Answer and solution
Answer: C
Identify the functional group: for amines the suffix is “-amine” on the longest chain carrying N, and groups on nitrogen are written with the locant N. For CH3CH2NH2 this gives ethanamine.
On a secondary or tertiary amine the longest chain is the parent and the other groups on N take the locant N.
-
MCQWarm-up
The IUPAC or common name of CH3CH2CH2NH2 is- propan-2-amine
- propan-1-amine
- propanamide
- N-methylethanamine
Answer and solution
Answer: B
Identify the functional group: for amines the suffix is “-amine” on the longest chain carrying N, and groups on nitrogen are written with the locant N. For CH3CH2CH2NH2 this gives propan-1-amine.
On a secondary or tertiary amine the longest chain is the parent and the other groups on N take the locant N.
-
MCQWarm-up
The IUPAC or common name of C6H5NH2 is- phenylmethanamine
- aminophenol
- benzenamine (aniline)
- nitrobenzene
Answer and solution
Answer: C
Identify the functional group: for amines the suffix is “-amine” on the longest chain carrying N, and groups on nitrogen are written with the locant N. For C6H5NH2 this gives benzenamine (aniline).
On a secondary or tertiary amine the longest chain is the parent and the other groups on N take the locant N.
-
MCQWarm-up
The main organic product of nitrobenzene with Sn and conc. HCl, then NaOH is- C6H5NH2
- C6H5NHOH
- C6H5N=NC6H5
- C6H5OH
Answer and solution
Answer: A
Metal and acid reduce NO2 fully to NH2 (as C6H5NH3+Cl−). NaOH frees the amine.
Product: C6H5NH2.
-
MCQWarm-up
The main organic product of nitrobenzene with H2 over Pd is- C6H5NHOH
- C6H5NH2
- C6H5NO
- C6H6
Answer and solution
Answer: B
Catalytic hydrogenation reduces NO2 to NH2.
Product: C6H5NH2.
-
MCQWarm-up
The main organic product of aniline with sodium nitrite and HCl at 273–278 K is- C6H5OH and N2
- C6H5N2+Cl−
- C6H5NO2
- C6H5N=O
Answer and solution
Answer: B
Primary aromatic amines give stable diazonium salts in the cold.
Product: C6H5N2+Cl−.
-
MCQWarm-up
The main organic product of aniline with bromine water is- 2,4,6-tribromoaniline
- 4-bromoaniline
- 2-bromoaniline
- 3,5-dibromoaniline
Answer and solution
Answer: A
The NH2 group activates the ortho and para positions strongly; all three react.
Product: 2,4,6-tribromoaniline.
-
MCQWarm-up
The main organic product of aniline with HCl is- C6H5Cl
- C6H5NH3+Cl−
- C6H5NHCl
- C6H5N2+Cl−
Answer and solution
Answer: B
The basic amine takes a proton to give anilinium chloride.
Product: C6H5NH3+Cl−.
-
MCQWarm-up
The main organic product of ethylammonium chloride with aqueous NaOH is- CH3CH2NH2 + NaCl + H2O
- CH3CH2OH
- CH3CH2Cl
- CH3CH2NHOH
Answer and solution
Answer: A
A stronger base (NaOH) displaces the weak base from its salt.
Product: CH3CH2NH2 + NaCl + H2O.
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- C6H5CONH2 (benzamide)
- C6H5NO2 (nitrobenzene)
- CH3CH2OH (ethanol)
- CH3NH2 (methylamine)
Answer and solution
Answer: D
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
CH3NH2 (methylamine): primary aliphatic amine: it fits.
Not suitable: C6H5CONH2 (benzamide): an amide (not basic); C6H5NO2 (nitrobenzene): a nitro compound (no basic nitrogen); CH3CH2OH (ethanol): an alcohol (no nitrogen).
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- C6H5NH2 (aniline)
- CH3CH2OH (ethanol)
- CH3CONHC6H5 (acetanilide)
- C6H5CONH2 (benzamide)
Answer and solution
Answer: A
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
C6H5NH2 (aniline): primary aromatic amine: it fits.
Not suitable: CH3CH2OH (ethanol): an alcohol (no nitrogen); CH3CONHC6H5 (acetanilide): an amide: the N lone pair is tied up with C=O, so it is not basic; C6H5CONH2 (benzamide): an amide (not basic).
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- C6H5CONH2 (benzamide)
- (CH3)2NH (dimethylamine)
- C6H5NO2 (nitrobenzene)
- CH3CH2OH (ethanol)
Answer and solution
Answer: B
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
(CH3)2NH (dimethylamine): secondary amine: it fits.
Not suitable: C6H5CONH2 (benzamide): an amide (not basic); C6H5NO2 (nitrobenzene): a nitro compound (no basic nitrogen); CH3CH2OH (ethanol): an alcohol (no nitrogen).
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- CH3CH2OH (ethanol)
- CH3CONHC6H5 (acetanilide)
- (CH3)3N (trimethylamine)
- C6H5CONH2 (benzamide)
Answer and solution
Answer: C
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
(CH3)3N (trimethylamine): tertiary amine (no N–H): it fits.
Not suitable: CH3CH2OH (ethanol): an alcohol (no nitrogen); CH3CONHC6H5 (acetanilide): an amide: the N lone pair is tied up with C=O, so it is not basic; C6H5CONH2 (benzamide): an amide (not basic).
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- C6H5CONH2 (benzamide)
- C6H5NO2 (nitrobenzene)
- CH3CH2OH (ethanol)
- CH3NH2 (methylamine)
Answer and solution
Answer: D
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
CH3NH2 (methylamine): primary aliphatic amine: it fits.
Not suitable: C6H5CONH2 (benzamide): an amide (not basic); C6H5NO2 (nitrobenzene): a nitro compound (no basic nitrogen); CH3CH2OH (ethanol): an alcohol (no nitrogen).
-
MCQWarm-up
Which of the following gives a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- C6H5NH2 (aniline)
- CH3CH2OH (ethanol)
- CH3CONHC6H5 (acetanilide)
- C6H5CONH2 (benzamide)
Answer and solution
Answer: A
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
C6H5NH2 (aniline): primary aromatic amine: it fits.
Not suitable: CH3CH2OH (ethanol): an alcohol (no nitrogen); CH3CONHC6H5 (acetanilide): an amide: the N lone pair is tied up with C=O, so it is not basic; C6H5CONH2 (benzamide): an amide (not basic).
-
MCQWarm-up
Which of the following does NOT give a clear solution when shaken with dilute HCl (it dissolves because it is basic)?- CH3NH2 (methylamine)
- C6H5NO2 (nitrobenzene)
- C6H5CH2NH2 (benzylamine)
- p-CH3C6H4NH2 (p-toluidine)
Answer and solution
Answer: B
Amines are basic and form soluble ammonium chlorides. Amides, nitro compounds and alcohols are not basic enough to dissolve.
C6H5NO2 (nitrobenzene): a nitro compound (no basic nitrogen): it does not fit.
The others do: CH3NH2 (methylamine): primary aliphatic amine; C6H5CH2NH2 (benzylamine): primary aliphatic amine (the NH2 is on a CH2, not on the ring); p-CH3C6H4NH2 (p-toluidine): primary aromatic amine.
Why people get this wrong: A “does NOT” question: three options are positive and one is negative.
-
MCQStandard
The Gabriel phthalimide synthesis is used to prepare- secondary amines
- tertiary amines
- aromatic primary amines such as aniline
- primary aliphatic amines
Answer and solution
Answer: D
Potassium phthalimide gives only one alkylation (N is blocked after one R) and hydrolysis releases RNH2. Aryl halides do not undergo SN2 with phthalimide anion, so aniline cannot be made this way.
Why people get this wrong: It cannot give 2° or 3° amines and it cannot make arylamines.
-
MCQStandard
In the Hofmann bromamide degradation, the amine obtained has- one carbon atom fewer than the amide
- the same number of carbon atoms as the amide
- one carbon atom more than the amide
- two carbon atoms fewer than the amide
Answer and solution
Answer: A
RCONH2 + Br2 + 4 NaOH → RNH2 + Na2CO3 + 2 NaBr + 2 H2O. The carbonyl carbon is lost as carbonate, and R moves from C to N.
Why people get this wrong: Reduction of an amide with LiAlH4 keeps the carbon count; Hofmann loses one.
-
MCQStandard
The carbylamine test (CHCl3 and alcoholic KOH, warm) is given by- secondary amines
- primary amines, both aliphatic and aromatic
- tertiary amines
- all amines
Answer and solution
Answer: B
RNH2 + CHCl3 + 3 KOH → RNC + 3 KCl + 3 H2O. The product is an isocyanide with a very unpleasant smell. 2° and 3° amines cannot lose two hydrogens from N.
-
MCQStandard
Hinsberg’s reagent is- benzoyl chloride
- benzenediazonium chloride
- benzenesulphonyl chloride
- acetyl chloride
Answer and solution
Answer: C
C6H5SO2Cl reacts with 1° and 2° amines to give sulphonamides and is used to separate and identify them.
-
MCQStandard
Aniline reacts with bromine water at room temperature to give- p-bromoaniline only
- m-bromoaniline
- N-bromoaniline
- 2,4,6-tribromoaniline as a white precipitate
Answer and solution
Answer: D
–NH2 is a very strong activating group (the lone pair enters the ring), so all three ortho and para positions are brominated even without a catalyst.
Why people get this wrong: To stop at mono-bromination the amine is acetylated first.
-
MCQStandard
The amino group of aniline is acetylated before nitration or bromination in order to- reduce its activating influence and prevent oxidation or protonation
- make the ring more reactive
- change the directing effect to meta
- convert aniline to a diazonium salt
Answer and solution
Answer: A
The N lone pair is shared with the C=O of the acetyl group, so the ring is only moderately activated. This avoids polysubstitution, oxidation of the amino group and formation of anilinium ion (meta products). After the reaction the acetyl group is removed by hydrolysis.
-
MCQStandard
Benzenediazonium chloride on treatment with CuCl and HCl gives- phenol
- chlorobenzene
- benzene
- nitrobenzene
Answer and solution
Answer: B
This is the Sandmeyer reaction: Cu(I) salt catalyses replacement of N2+ by Cl (or Br, CN).