Vector algebra: dot, cross and triple products
Mathematical methods · 81 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Vector algebra: dot, cross and triple products.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
The magnitude of is ______.Answer and solution
Answer: 3
.Why people get this wrong: Adding the components () instead of using Pythagoras.
-
MCQWarm-up
For and , the dot product isAnswer and solution
Answer: B
Multiply matching components and add: .Why people get this wrong: Missing the minus sign on gives .
-
MCQWarm-up
For the right-handed unit vectors, equalsAnswer and solution
Answer: C
Going round the cycle in order gives a plus sign: , , . Against the cycle gives a minus sign.Why people get this wrong: is , the reversed order.
-
MSQWarm-up
Which of these hold for all vectors and ?Answer and solution
Answer: A, C, D
The dot product is symmetric. The cross product is antisymmetric: , so the second is false unless the product is zero. Then forces it to be . is perpendicular to , so its dot product with is zero.Why people get this wrong: Carrying the commutativity of ordinary multiplication over to the cross product.
-
NATWarm-up
The angle between and is ______ degrees.Answer and solution
Answer: 60 ° (±0.05)
, so .Why people get this wrong: Forgetting to divide by the magnitudes and taking .
-
MCQWarm-up
A constant force N moves a particle through m. The work done is- J
- J
- J
- J
Answer and solution
Answer: D
J. The motion along does no work because the force has no -part.Why people get this wrong: Multiplying magnitudes () ignores the angle between force and displacement.
-
MCQWarm-up
A small current loop with magnetic moment A m² sits in a uniform field T. The torque on it is- N m
- N m
- zero, because and are perpendicular
- N m
Answer and solution
Answer: D
N m, since the cyclic order gives . The torque is largest (not zero) when the two vectors are perpendicular, and it points along neither of them.Why people get this wrong: ; taking by mistake flips the sign.
-
NATStandard
The area of the triangle with vertices , and is ______.Answer and solution
Answer: 5
Edges from the origin: and . , of length . The triangle is half the parallelogram: area .Why people get this wrong: Forgetting the factor : is the area of the parallelogram.
-
MCQStandard
The scalar projection (component) of along isAnswer and solution
Answer: C
Component of along .Why people get this wrong: Dividing by gives the component of along instead.
-
NATStandard
The vectors and are perpendicular when equals ______.Answer and solution
Answer: 14
Perpendicular means zero dot product: , so .Why people get this wrong: Setting the cross product to zero instead tests for parallel vectors.
-
MCQStandard
A force N acts at the point m. The torque about the origin is- N m
- N m
- N m
- N m
Answer and solution
Answer: A
, since .Why people get this wrong: Computing (the wrong order) flips the sign.
-
NATStandard
The volume of the parallelepiped with edges , and is ______.Answer and solution
Answer: 6
Volume .Why people get this wrong: Adding the three edge lengths or multiplying them () ignores that the edges are not perpendicular.
-
MCQStandard
The direction cosines of the vector areAnswer and solution
Answer: D
Divide each component by the length : . Check: .Why people get this wrong: Dropping the sign of the -component; a direction cosine is negative when the vector points along .
-
MSQStandard
Non-zero vectors and satisfy . Which statements must be true?- and are parallel or antiparallel.
Answer and solution
Answer: B, D
with means : or . Then . The vectors need not be equal (they can differ in length or point opposite ways), and their dot product is not zero.Why people get this wrong: Thinking a zero cross product means equal vectors, or mixing it up with the condition for perpendicular vectors.
-
NATStandard
Given , and , the value of is ______ (to two decimal places).Answer and solution
Answer: 10.39 (±0.01)
(because ). So .Why people get this wrong: Finding and then using again instead of .
-
MCQStandard
A unit vector perpendicular to both and isAnswer and solution
Answer: B
. Its length is , so the unit vector is (its negative also works). Check: dot with gives .Why people get this wrong: Dividing by (the sum of squares) instead of .
-
NATStandard
The distance of the point from the plane is ______ (to three decimal places).Answer and solution
Answer: 1.333 (±0.002)
The normal is , of length 3. Distance .Why people get this wrong: Forgetting to divide by , which gives 4.
-
MSQStandard
Which of these are unit vectors (for every value of the angles)?Answer and solution
Answer: A, C, D
Check the length. : unit. : length , not unit (it should be divided by ). : unit. : unit; it is in spherical coordinates.Why people get this wrong: Dividing by the sum of the components instead of the square root of the sum of their squares.
-
MCQStandard
For two non-zero vectors, the scalar projection of on equals the scalar projection of on . Then necessarily- either or
- , and nothing else is possible
Answer and solution
Answer: A
The projections are and . Setting them equal: . So either (perpendicular: both projections are zero) or (any angle). Neither equality of the vectors nor parallelism is needed.Why people get this wrong: Cancelling from both sides loses the perpendicular case.
-
MCQStandard
The line meets the plane at the pointAnswer and solution
Answer: C
A point of the line is . Put it into the plane: , so and the point is . Check: .Why people get this wrong: also satisfies the plane but is not on the line; check both conditions.
-
NATStandard
Two vectors have , and . The value of is ______.Answer and solution
Answer: 1.5 (±0.01)
, so and . (Then .)Why people get this wrong: Forgetting the factor 2 in front of the cross term gives 3.
-
MCQExam level
The vectors , and lie in one plane when equalsAnswer and solution
Answer: D
Coplanar means the box they span has no volume: , so .Why people get this wrong: A sign slip in the middle cofactor (it carries a minus sign) gives .
-
MCQExam level
The vector triple product equalsAnswer and solution
Answer: A
"BAC minus CAB": . The result lies in the plane of and , because is perpendicular to that plane and crossing again brings it back into the plane.Why people get this wrong: The cross product is not associative: lies in the plane of and instead.
-
NATExam level
For , and , the magnitude of is ______ (to three decimal places).Answer and solution
Answer: 1.414 (±0.002)
BAC minus CAB: and , so the result is , of magnitude . (Direct check: and .)Why people get this wrong: Computing instead; here it gives , a different vector (by coincidence of the same length), because the cross product is not associative.
-
MSQExam level
With the summation convention (repeated indices summed over 1, 2, 3), which statements are true?Answer and solution
Answer: A, B, C
Of the 27 index combinations, 6 are permutations of 123 with , so . sets , and vanishes when two indices are equal: . Swapping two indices flips the sign: . The contraction identity has a minus sign: ; it is the index form of BAC-CAB.Why people get this wrong: Remembering the identity with a plus sign; test it with , where the left side must vanish.
-
MCQExam level
Two vectors have , and , and the angle between them is acute. The value of is- either or ; it cannot be decided
Answer and solution
Answer: A
. An acute angle means the dot product is positive: .Why people get this wrong: Without the word "acute" both and fit; the cross product only fixes .
-
MCQExam level
For non-coplanar , , , the reciprocal vector is defined as . Which is true?- and
- is parallel to
- and
- always
Answer and solution
Answer: C
. And is perpendicular to both and , so . In general is not along , and only when is perpendicular to and . These are the reciprocal lattice vectors of crystallography (up to ).Why people get this wrong: Thinking the reciprocal vector points along the original one; that is only true for orthogonal axes.
-
NATExam level
A particle at m has momentum kg m/s. The magnitude of its angular momentum about the origin is ______ kg m/s (to two decimal places).Answer and solution
Answer: 6.78 kg m²/s (±0.01)
. .Why people get this wrong: Getting the middle component wrong: it is , in that order.
-
MCQExam level
If , then equalsAnswer and solution
Answer: C
Expand by linearity. Every term with a repeated vector vanishes, leaving . A cyclic shift does not change the triple product, so the total is .Why people get this wrong: Missing the second surviving term, or giving it a minus sign: is a cyclic (even) shift, so it equals .
-
NATExam level
Line 1 passes through the origin along ; line 2 passes through along . The shortest distance between them is ______ (to three decimal places).Answer and solution
Answer: 2.309 (±0.002)
The common perpendicular is along . Project the joining vector onto it: .Why people get this wrong: Using the distance between the two given points (here ): those are not the closest points.