Home / Courses / IIT JAM Physics / Practice / Thermodynamic potentials and Maxwell relations

Thermodynamic potentials and Maxwell relations

Kinetic theory and thermodynamics · 58 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Thermodynamic potentials and Maxwell relations.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The natural variables of the Gibbs free energy G are
    1. T and V
    2. S and P
    3. T and P
    4. S and V
    Answer and solution

    Answer: C

    G=H−TS gives dG=−SdT+VdP, so G is naturally a function of T and P: the two variables easiest to control in a lab.

    Why people get this wrong: T,V belong to F; S,V to U; S,P to H.

  2. MCQWarm-up

    For a simple compressible system, the differential of the enthalpy H=U+PV is
    1. dH=TdS+VdP
    2. dH=TdS−PdV
    3. dH=−SdT+VdP
    4. dH=TdS−VdP
    Answer and solution

    Answer: A

    dH=dU+PdV+VdP and dU=TdS−PdV, so the PdV terms cancel: dH=TdS+VdP.
  3. MCQWarm-up

    The Helmholtz free energy is defined as
    1. F=H−TS
    2. F=U+PV
    3. F=U+TS
    4. F=U−TS
    Answer and solution

    Answer: D

    F=U−TS. (H−TS is the Gibbs energy G, and U+PV the enthalpy.)
  4. MSQWarm-up

    Which of these are extensive (double when the system is doubled at the same T and P)?
    1. Internal energy U
    2. Helmholtz energy F
    3. Temperature T
    4. Gibbs energy G
    Answer and solution

    Answer: A, B, D

    All four potentials are extensive, since they are energies of the whole system. Temperature, pressure and chemical potential are intensive.
  5. MCQWarm-up

    A system is held at fixed temperature and pressure. At equilibrium it has the minimum possible
    1. entropy S
    2. Gibbs energy G
    3. Helmholtz energy F
    4. internal energy U
    Answer and solution

    Answer: B

    At fixed T and P the second law becomes dG≤0: G falls until equilibrium, where it is a minimum. (F is minimised at fixed T and V; S is maximised in an isolated system.)
  6. MCQWarm-up

    From dU=TdS−PdV, the derivative (∂U/∂S)V equals
    1. −P
    2. V
    3. T
    4. P
    Answer and solution

    Answer: C

    Read it off: at constant volume dU=TdS. This is the thermodynamic definition of temperature.
  7. MCQWarm-up

    For a system made of a single kind of particle, the chemical potential μ equals
    1. the Helmholtz energy per particle, F/N
    2. the internal energy per particle, U/N
    3. the Gibbs energy per particle, G/N
    4. the enthalpy per particle, H/N
    Answer and solution

    Answer: C

    μ=(∂G/∂N)T,P. At fixed T and P, which are intensive, G can only grow in proportion to N, so G=Nμ(T,P) and μ=G/N. For F(T,V,N) the same argument fails, because V is extensive and must grow with N; so μ≠F/N in general.

    Why people get this wrong: μ=(∂F/∂N)T,V is true, but that derivative is not F/N.

  8. MCQStandard

    The Maxwell relation that follows from dF=−SdT−PdV is
    1. (∂S∂V)T=(∂P∂T)V
    2. (∂S∂V)T=−(∂P∂T)V
    3. (∂S∂P)T=−(∂V∂T)P
    4. (∂T∂V)S=−(∂P∂S)V
    Answer and solution

    Answer: A

    Mixed derivatives of F are equal: ∂∂V(∂F∂T)=∂∂T(∂F∂V), i.e. (∂(−S)∂V)T=(∂(−P)∂T)V. The two minus signs cancel.

    Why people get this wrong: Option B keeps only one of the two minus signs. C comes from G and D from U.

  9. MCQStandard

    The Maxwell relation from the Gibbs energy is
    1. (∂S∂P)T=(∂V∂T)P
    2. (∂T∂P)S=(∂V∂S)P
    3. (∂S∂V)T=(∂P∂T)V
    4. (∂S∂P)T=−(∂V∂T)P
    Answer and solution

    Answer: D

    dG=−SdT+VdP, so (∂G/∂T)P=−S and (∂G/∂P)T=V. Equal mixed derivatives: −(∂S/∂P)T=(∂V/∂T)P. Physically: most things expand when heated, so their entropy falls when squeezed.
  10. NATStandard

    Two moles of an ideal gas occupy 0.05 m3. Using a Maxwell relation, (∂S/∂V)T is ______ J K−1 m−3.
    Answer and solution

    Answer: 332.6 J K$^{-1}$ m$^{-3}$ (±2)

    (∂S/∂V)T=(∂P/∂T)V=nR/V=2×8.314/0.05≈332.6 J K−1 m−3. Integrating gives the familiar ΔS=nRln⁡(V2/V1) at constant T.
  11. MCQStandard

    The Gibbs–Helmholtz equation gives the enthalpy from G(T,P) as
    1. H=−T2(∂G∂T)P
    2. H=G−T(∂G∂T)P
    3. H=G+T(∂G∂T)P
    4. H=G−P(∂G∂P)T
    Answer and solution

    Answer: B

    S=−(∂G/∂T)P and H=G+TS, so H=G−T(∂G/∂T)P. Equivalently H=−T2∂(G/T)/∂T at constant P.

    Why people get this wrong: Option A drops the G/T inside the derivative.

  12. MSQStandard

    For an ideal gas, which of these are zero?
    1. (∂U/∂V)T
    2. (∂H/∂P)T
    3. The Joule–Thomson coefficient (∂T/∂P)H
    4. (∂S/∂V)T
    Answer and solution

    Answer: A, B, C

    For an ideal gas U and H depend only on T, so A and B vanish, and a throttled ideal gas keeps T (C). D is nR/V, not zero: entropy grows with volume.
  13. MCQStandard

    In a process at constant temperature and pressure, the maximum useful work (other than PdV work, e.g. electrical work from a battery) a system can deliver is
    1. −ΔH
    2. −ΔU
    3. −ΔG
    4. −ΔF
    Answer and solution

    Answer: C

    With T and P fixed, dG=dU+PdV−TdS and TdS≥dQ. So −dG≥dWother, with equality for a reversible process. (−ΔF is the maximum total work at constant T.)
  14. MCQStandard

    When n moles of an ideal gas are compressed isothermally from pressure P1 to P2, the change in Gibbs energy is
    1. nRTln⁡(P2/P1)
    2. nRTln⁡(P1/P2)
    3. 0, because T is constant
    4. nRln⁡(P2/P1)
    Answer and solution

    Answer: A

    (∂G/∂P)T=V=nRT/P, so ΔG=∫nRTdP/P=nRTln⁡(P2/P1), positive for a compression.

    Why people get this wrong: For an ideal gas ΔU=ΔH=0 at constant T, but ΔG=−TΔS≠0.

  15. MCQStandard

    (∂F/∂V)T equals
    1. P
    2. −S
    3. V
    4. −P
    Answer and solution

    Answer: D

    From dF=−SdT−PdV. Pressure is minus the rate of change of free energy with volume at constant temperature.
  16. MCQStandard

    For a system with a single kind of particle, the chemical potential μ equals
    1. the enthalpy per particle, H/N
    2. the Gibbs energy per particle, G/N
    3. the internal energy per particle, U/N
    4. the Helmholtz energy per particle, F/N
    Answer and solution

    Answer: B

    G(T,P,N) is extensive in N alone (its other variables are intensive), so G=Ng(T,P), and μ=(∂G/∂N)T,P=g=G/N. The same argument fails for F(T,V,N), since V is extensive too.
  17. NATStandard

    One mole of an ideal gas is compressed isothermally at 300 K from 1 bar to 10 bar. Its Gibbs energy rises by ______ kJ.
    Answer and solution

    Answer: 5.74 kJ (±0.03)

    ΔG=nRTln⁡(P2/P1)=8.314×300×ln⁡10=2494×2.303≈5743 J =5.74 kJ.

    Why people get this wrong: Using log10⁡ gives 2.49 kJ.

  18. MSQStandard

    For a simple one-component system with dG=−SdT+VdP+μdN, which relations are correct?
    1. V=(∂G/∂P)T,N
    2. (∂G/∂T)P,N=S
    3. CP=−T(∂2G/∂T2)P,N
    4. μ=(∂G/∂N)T,P
    Answer and solution

    Answer: A, C, D

    Read the coefficients of dG: V=∂G/∂P, μ=∂G/∂N, and ∂G/∂T=−S (minus sign), so the second relation is wrong. Then CP=T(∂S/∂T)P=−T(∂2G/∂T2)P. Because CP>0, G(T) at fixed P always curves downward.

    Why people get this wrong: The sign: G falls with temperature at fixed pressure, since S>0.

  19. MCQStandard

    At fixed pressure, the Gibbs energy G of a substance is plotted against temperature. The curve
    1. falls with slope −S and bends downward, with curvature −CP/T
    2. rises with slope S and bends upward
    3. falls with slope −S and bends upward
    4. is a straight line, since S is constant
    Answer and solution

    Answer: A

    (∂G/∂T)P=−S<0, so G falls. (∂2G/∂T2)P=−(∂S/∂T)P=−CP/T<0, so the slope grows steeper as T rises: the curve bends downward. This is why, at a phase transition, the phase with the larger entropy (steeper curve) wins at higher temperature.

    Why people get this wrong: Positive entropy and positive heat capacity give a negative slope and a negative curvature.

  20. NATExam level

    For a liquid at 300 K, the molar volume is 1.8×10−5 m3, the expansion coefficient α=2.1×10−4 K−1 and the isothermal compressibility κT=4.5×10−10 Pa−1. Then CP−CV is ______ J mol−1 K−1.
    Answer and solution

    Answer: 0.529 J mol$^{-1}$ K$^{-1}$ (±0.005)

    CP−CV=TVα2/κT=300×1.8×10−5×(2.1×10−4)2/4.5×10−10=300×1.8×10−5×98≈0.529 J mol−1 K−1. Tiny compared with R: for liquids and solids CP≈CV.

    Why people get this wrong: Forgetting to square α.

  21. NATExam level

    For one mole of a van der Waals gas with a=0.14 Pa m6 mol−2 at molar volume 1.0×10−3 m3, the internal pressure (∂U/∂V)T is ______ kPa.
    Answer and solution

    Answer: 140 kPa (±1)

    Energy equation: (∂U/∂V)T=T(∂P/∂T)V−P. For P=RT/(V−b)−a/V2: T⋅R/(V−b)−P=a/V2=0.14/10−6=1.4×105 Pa =140 kPa.
  22. MCQExam level

    In a free (Joule) expansion into vacuum in an insulated container, a van der Waals gas
    1. keeps its temperature, because Q=W=0
    2. cools only if it is below its inversion temperature
    3. cools, because (∂U/∂V)T=an2/V2>0
    4. warms, because the molecules gain kinetic energy
    Answer and solution

    Answer: C

    U stays constant. Pulling attracting molecules apart raises their potential energy, which must come from their kinetic energy: (∂T/∂V)U=−1CV(∂U∂V)T=−an2CVV2<0.

    Why people get this wrong: D describes the Joule–Thomson (throttling) process, which is different.

  23. NATExam level

    One mole of a van der Waals gas (a=0.14 Pa m6 mol−2, CV=52R) expands freely from 1.0 L to 2.0 L in an insulated container. Its temperature changes by ______ K.
    Answer and solution

    Answer: -3.37 K (±0.04)

    U=CVT−a/V per mole stays fixed: CVΔT=a(1/V2−1/V1). So ΔT=0.1420.79(500−1000)≈−3.37 K.
  24. MCQExam level

    In a steady throttling (Joule–Thomson) process through a porous plug, the quantity that stays the same is
    1. the enthalpy
    2. the internal energy
    3. the entropy
    4. the temperature
    Answer and solution

    Answer: A

    For a parcel pushed through: U2−U1=P1V1−P2V2 (the work done by the gas behind minus the work done on the gas ahead; Q=0). So U1+P1V1=U2+P2V2: H is constant. Entropy rises, as throttling is irreversible.
  25. NATExam level

    For a van der Waals gas with a=0.14 Pa m6 mol−2 and b=3.2×10−5 m3 mol−1, the Joule–Thomson inversion temperature at low pressure is ______ K.
    Answer and solution

    Answer: 1052 K (±10)

    At low density μJT≈1CP(2aRT−b), which changes sign at Ti=2a/Rb=0.28/(8.314×3.2×10−5)≈1052 K. Below Ti the gas cools on throttling.
  26. MSQExam level

    Which statements about the Joule–Thomson coefficient μJT=(∂T/∂P)H are correct?
    1. μJT=VCP(Tα−1), with α the expansion coefficient
    2. μJT=0 for an ideal gas
    3. If μJT>0, the gas cools as it passes through the throttle
    4. Every gas cools in a Joule–Thomson expansion
    Answer and solution

    Answer: A, B, C

    A: from dH=CPdT+[V−T(∂V/∂T)P]dP=0. B: α=1/T for an ideal gas. C: the pressure drops (dP<0), so dT=μdP<0. D: false; above the inversion temperature (e.g. hydrogen and helium at room temperature) the gas warms.
  27. MCQExam level

    The ratio of the adiabatic compressibility κS to the isothermal compressibility κT of any substance is
    1. CP/CV
    2. 1
    3. γ−1
    4. CV/CP
    Answer and solution

    Answer: D

    A general result (Reech): κT/κS=CP/CV=γ. A substance is harder to compress when no heat can leave, so κS<κT. For an ideal gas: κT=1/P and κS=1/(γP).
  28. MCQExam level

    The Maxwell relation from the internal energy U(S,V) is
    1. (∂S∂V)T=(∂P∂T)V
    2. (∂T∂V)S=−(∂P∂S)V
    3. (∂T∂V)S=(∂P∂S)V
    4. (∂T∂P)S=−(∂V∂S)P
    Answer and solution

    Answer: B

    (∂U/∂S)V=T and (∂U/∂V)S=−P. Equal mixed derivatives give (∂T/∂V)S=−(∂P/∂S)V.
  29. MSQExam level

    Which of these must hold for a thermodynamically stable homogeneous substance?
    1. CV>0
    2. κT>0
    3. CP≥CV
    4. Expansion coefficient α>0
    Answer and solution

    Answer: A, B, C

    Stability (entropy a maximum, or F and G minima) requires CV>0 and κT>0. Then CP−CV=TVα2/κT≥0. But α can be negative: water contracts on heating between 0 and 4∘C.
  30. NATExam level

    A process at constant pressure has ΔH=−50 kJ and ΔS=−100 J/K, both roughly independent of temperature. It happens spontaneously only below ______ K.
    Answer and solution

    Answer: 500 K

    Spontaneous at fixed T,P means ΔG=ΔH−TΔS<0: −50000+100T<0, so T<500 K. The energy term favours it; the entropy term opposes it and wins at high temperature.

← All topics · Timed mock test →