Home / Courses / IIT JAM Physics / Practice / The second law, engines and entropy

The second law, engines and entropy

Kinetic theory and thermodynamics · 72 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: The second law, engines and entropy.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The maximum possible efficiency of a heat engine working between reservoirs at 500 K and 300 K is
    1. 67%
    2. 25%
    3. 40%
    4. 60%
    Answer and solution

    Answer: C

    Carnot: η=1−Tc/Th=1−300/500=0.40.

    Why people get this wrong: 60% is Tc/Th, the fraction of heat thrown away, not the efficiency.

  2. MCQWarm-up

    Which statement is the Kelvin–Planck form of the second law?
    1. No cyclic device can take heat from a single reservoir and turn it completely into work
    2. Heat cannot flow from a hot body to a cold body
    3. The energy of an isolated system is constant
    4. Every reversible engine has 100% efficiency
    Answer and solution

    Answer: A

    Kelvin–Planck forbids a perfect engine: some heat must always be rejected to a colder body. (The Clausius statement forbids heat flowing by itself from cold to hot; B has the direction backwards. C is the first law.)
  3. NATWarm-up

    1 kg of ice melts at 0∘C (latent heat 334 kJ/kg). The entropy of the water increases by ______ J/K.
    Answer and solution

    Answer: 1222.8 J/K (±6)

    Melting happens at constant temperature, so ΔS=Q/T=334000/273.15≈1223 J/K.

    Why people get this wrong: Dividing by 0 (Celsius) is impossible, a reminder that T must be absolute.

  4. MCQWarm-up

    The coefficient of performance (heat removed / work input) of a Carnot refrigerator working between 270 K and 300 K is
    1. 10
    2. 0.1
    3. 1.11
    4. 9
    Answer and solution

    Answer: D

    For a reversible refrigerator Qc/W=Tc/(Th−Tc)=270/30=9.

    Why people get this wrong: 10=Th/(Th−Tc) is the COP of a heat pump, which counts the heat delivered to the hot side.

  5. MSQWarm-up

    For a reversible adiabatic process, which statements are true?
    1. The entropy of the system does not change
    2. The process is isentropic
    3. No heat is exchanged
    4. The temperature stays constant
    Answer and solution

    Answer: A, B, C

    dS=dQrev/T=0, so a reversible adiabat is an isentrope. The temperature usually changes (an ideal gas cools on adiabatic expansion).
  6. NATWarm-up

    Two moles of an ideal gas expand isothermally to twice their volume. The entropy of the gas increases by ______ J/K.
    Answer and solution

    Answer: 11.53 J/K (±0.06)

    ΔS=nRln⁡(V2/V1)=2×8.314×ln⁡2≈11.53 J/K. This is true whether the expansion is reversible or not, because S is a state function.
  7. MCQWarm-up

    A large reservoir at 400 K gives 1000 J of heat to a system. The entropy of the reservoir changes by
    1. +2.5 J/K
    2. −2.5 J/K
    3. 0, because a reservoir's temperature does not change
    4. −4×105 J/K
    Answer and solution

    Answer: B

    A reservoir stays at one temperature, so the heat leaves it reversibly as far as the reservoir is concerned: ΔS=Q/T=−1000/400=−2.5 J/K. The sign is negative because heat leaves it. Whether the total entropy rises depends on the temperature of the system that receives the heat.

    Why people get this wrong: A constant temperature does not mean constant entropy; ΔS=Q/T is exactly the formula for a reservoir.

  8. MCQStandard

    One mole of an ideal gas undergoes free expansion into vacuum, doubling its volume, in an insulated container. The entropy change of the gas is
    1. R
    2. Rln⁡2
    3. 0, because no heat was exchanged
    4. −Rln⁡2
    Answer and solution

    Answer: B

    Entropy is a state function. Find a reversible path between the same states: an isothermal expansion (the temperature is the same at both ends). Along it ΔS=Rln⁡2. The actual process is irreversible, so ΔS>∫dQ/T=0.

    Why people get this wrong: ΔS=Q/T only for a reversible path. Here Q=0 but ΔS>0.

  9. NATStandard

    A reversible heat pump keeps a house at 25∘C while it is 5∘C outside. Its coefficient of performance (heat delivered / work input) is ______ (to one decimal place).
    Answer and solution

    Answer: 14.9 (±0.1)

    COPHP=Th/(Th−Tc)=298.15/20≈14.9. Each joule of electricity moves almost 15 J of heat indoors, in the ideal limit.

    Why people get this wrong: Using Celsius, 25/20=1.25. Only the difference may be taken in Celsius.

  10. MCQStandard

    An inventor claims an engine that takes 1000 J per cycle from a reservoir at 400 K, rejects heat to one at 300 K and gives 300 J of work per cycle. The claim
    1. violates the first law
    2. is possible only if the engine is reversible
    3. violates the second law, because the maximum work is 250 J
    4. is possible, because 300 J < 1000 J
    Answer and solution

    Answer: C

    Carnot efficiency =1−300/400=25%, so at most 250 J of work. Energy is conserved (700 J rejected), so the first law is fine; the second law is broken.
  11. NATStandard

    1 kg of water (c=4186 J kg−1 K−1) is heated from 20∘C to 80∘C. Its entropy increases by ______ J/K.
    Answer and solution

    Answer: 779.5 J/K (±4)

    ΔS=∫mcdT/T=mcln⁡(T2/T1)=4186ln⁡(353.15/293.15)=4186×0.1862≈780 J/K.

    Why people get this wrong: Using Q/T with a single temperature: the temperature changes during heating, so integrate.

  12. MCQStandard

    The efficiency of an ideal air-standard Otto cycle with compression ratio r=Vmax⁡/Vmin⁡ is
    1. 1−r1−γ
    2. 1−r−γ
    3. 1−1/r
    4. 1−rγ−1
    Answer and solution

    Answer: A

    Heat enters and leaves at constant volume, and the two adiabats link temperatures by T∝V1−γ. Then η=1−Texhaust startTafter combustion=1−r1−γ=1−1/rγ−1.
  13. MSQStandard

    Which statements are correct?
    1. The entropy of an isolated system increases in any irreversible process inside it
    2. The entropy of a system can decrease
    3. In a reversible process the total entropy of system plus surroundings stays constant
    4. The entropy of an isolated system can decrease if the process is slow enough
    Answer and solution

    Answer: A, B, C

    A and C are the second law. B: a system that gives out heat (a cooling cup of tea) loses entropy, while its surroundings gain more. D: slowness never makes ΔS of an isolated system negative; at best (reversible) it is zero.
  14. MCQStandard

    On a temperature–entropy (T–S) diagram, a Carnot cycle is
    1. a rectangle whose area is the heat absorbed
    2. a pair of hyperbolas joined by vertical lines
    3. a single straight line, because entropy is conserved
    4. a rectangle whose area is the net work per cycle
    Answer and solution

    Answer: D

    Two isotherms (horizontal lines at Th and Tc) and two reversible adiabats (vertical lines, constant S). The area ∮TdS=Qh−Qc=W. The heat absorbed is the area under the top line, ThΔS.
  15. NATStandard

    1200 J of heat flows directly from a reservoir at 600 K to a reservoir at 300 K. The entropy of the universe increases by ______ J/K.
    Answer and solution

    Answer: 2 J/K

    Hot reservoir: −1200/600=−2 J/K. Cold reservoir: +1200/300=+4 J/K. Total +2 J/K. Positive, as it must be for heat flowing down a temperature difference.
  16. MCQStandard

    The third law of thermodynamics (Nernst–Planck form) states that
    1. energy cannot be created or destroyed
    2. the entropy of a perfect crystal tends to zero as T→0
    3. the entropy of any system is zero at 0∘C
    4. no engine can be more efficient than a Carnot engine
    Answer and solution

    Answer: B

    As T→0 a perfect crystal settles into its single ground state, W=1, so S=kln⁡W→0. C is a consequence of the second law, D is the first law.
  17. MCQStandard

    For any cycle, with dQ the heat taken in at a boundary where the temperature is T, the Clausius inequality says
    1. ∮dQ=0 for every cycle
    2. ∮dQ/T=0 for every cycle
    3. ∮dQ/T≤0, with equality for a reversible cycle
    4. ∮dQ/T≥0, with equality for a reversible cycle
    Answer and solution

    Answer: C

    An irreversible engine rejects more heat than a reversible one for the same heat taken in, which makes ∑Q/T negative. Only for reversible cycles is ∮dQ/T=0, which is what makes S a state function.
  18. MCQStandard

    A device works as a refrigerator with coefficient of performance KR (heat removed from the cold side per unit work). Run as a heat pump between the same two places (heat delivered to the hot side per unit work), its coefficient of performance is
    1. KR−1
    2. 1/KR
    3. KR+1
    4. KR
    Answer and solution

    Answer: C

    Per cycle, energy conservation gives QH=QC+W. So QHW=QCW+1=KR+1. This holds for any device, reversible or not.

    Why people get this wrong: Thinking the heat pump COP is the inverse; both measure useful heat per unit work, and the hot side also gets the work.

  19. MCQStandard

    A reversible engine works between 127∘C and 27∘C. Its efficiency is
    1. 78.7%
    2. 21.3%
    3. 100/127=79%
    4. 25%
    Answer and solution

    Answer: D

    Convert to kelvin: TH=400 K, TC=300 K. η=1−300400=25%.

    Why people get this wrong: Using Celsius temperatures (1−27/127=78.7%); the Carnot formula needs absolute temperatures.

  20. MCQStandard

    Which of these processes is reversible (in the thermodynamic sense)?
    1. A gas expanding freely into a vacuum
    2. Heat flowing from a body at 350 K to one at 300 K
    3. Two different gases mixing by diffusion
    4. An ideal gas compressed very slowly by a frictionless piston, in contact with a reservoir at the gas's own temperature
    Answer and solution

    Answer: D

    A reversible process can be undone with no change left anywhere; it must be quasi-static, frictionless, and exchange heat only across vanishing temperature differences. The slow frictionless isothermal compression meets all three. Free expansion, heat flow across a finite gap and mixing all raise the entropy of the universe.

    Why people get this wrong: Choosing heat flow because the temperatures are close; any finite temperature difference creates entropy.

  21. NATStandard

    A current of 1.0 A flows for 10 s through a 100 Ω resistor that is kept at 300 K by a large water bath. The entropy of the universe rises by ______ J/K.
    Answer and solution

    Answer: 3.33 (±0.03)

    The resistor dissipates I2Rt=1×100×10=1000 J. Its own state is the same at the end (same temperature), so its entropy does not change. All 1000 J goes into the bath at 300 K: ΔS=1000/300=3.33 J/K. Ordered electrical work has become disordered heat: an irreversible process.

    Why people get this wrong: Giving the resistor an entropy change as well counts the same heat twice; its state is unchanged.

  22. MSQStandard

    Which statements are correct?
    1. The entropy of an isolated system never decreases.
    2. The entropy of a system that is not isolated can decrease, if it gives out heat.
    3. A reversible adiabatic process leaves the entropy of the system unchanged.
    4. Over one cycle of a real (irreversible) heat engine, the entropy of the universe is unchanged, because the working substance returns to its starting state.
    Answer and solution

    Answer: A, B, C

    The second law forbids a decrease only for the total entropy of an isolated system. A system that gives out heat (a cooling cup of tea) loses entropy, but its surroundings gain more. Reversible and adiabatic means dS=dQrev/T=0. Over a cycle the working substance's entropy is unchanged (a state function), but the reservoirs gain entropy in an irreversible engine, so the universe's entropy rises.

    Why people get this wrong: The working substance returning to its start says nothing about the reservoirs.

  23. NATExam level

    One mole of helium and one mole of neon, both at the same temperature and pressure, are allowed to mix. The entropy of mixing is ______ J/K.
    Answer and solution

    Answer: 11.53 J/K (±0.06)

    Each gas expands into twice its volume: ΔS=Rln⁡2+Rln⁡2=2Rln⁡2≈11.53 J/K. In general ΔS=−nR∑xiln⁡xi with mole fractions xi.
  24. MCQExam level

    Two samples of the same gas at the same temperature and pressure are separated by a partition, which is removed. The entropy change is
    1. 0
    2. 2Rln⁡2 per two moles, as for different gases
    3. negative
    4. Rln⁡2 per two moles
    Answer and solution

    Answer: A

    Nothing measurable changes: put the partition back and you recover the original state. With identical (indistinguishable) particles the entropy is extensive and ΔS=0. Getting 2Rln⁡2 here is the Gibbs paradox, which is resolved by the 1/N! in the partition function.
  25. NATExam level

    Two identical blocks, each of heat capacity 500 J/K, at 400 K and 200 K are put in contact, insulated from everything else. When they reach equilibrium, the total entropy has increased by ______ J/K.
    Answer and solution

    Answer: 58.89 J/K (±0.3)

    Equal heat capacities, so Tf=300 K. ΔS=500ln⁡(300/400)+500ln⁡(300/200)=500ln⁡(1.125)≈58.9 J/K.
  26. MCQExam level

    Two Carnot engines work in series between 900 K and 400 K: the first rejects its heat to an intermediate reservoir at T, from which the second takes it. If both engines produce the same work, T is
    1. 600 K
    2. 500 K
    3. 700 K
    4. 650 K
    Answer and solution

    Answer: D

    Let the first absorb Q1; then Q2=Q1T/900 and Q3=Q1⋅400/900. Equal work: Q1−Q2=Q2−Q3 gives 900−T=T−400, so T=650 K (the arithmetic mean). For equal efficiencies it would be the geometric mean, 600 K.

    Why people get this wrong: Equal work and equal efficiency give different answers: arithmetic mean versus geometric mean.

  27. NATExam level

    An ideal Otto cycle with air (γ=1.4) has compression ratio 8. Its efficiency is ______ %.
    Answer and solution

    Answer: 56.5 % (±0.3)

    η=1−r1−γ=1−8−0.4=1−0.435≈56.5%.
  28. MSQExam level

    A system goes from state 1 to state 2 once by a reversible path and once by an irreversible path, exchanging heat with its surroundings. Which statements are correct?
    1. The entropy change of the system is the same for both paths
    2. The entropy change of the surroundings is the same for both paths
    3. The total entropy change of system plus surroundings is ≥0, and zero for the reversible path
    4. Along the irreversible path, ∫dQ/T equals the entropy change of the system
    Answer and solution

    Answer: A, C

    A: S is a state function. B: false, the surroundings receive different heat. C: second law. D: false, for the irreversible path ∫dQ/T<ΔSsystem (Clausius inequality).
  29. MCQExam level

    The entropy change of n moles of an ideal gas heated reversibly at constant pressure from T to 2T is
    1. n(CP−CV)ln⁡2
    2. nCPln⁡2
    3. nCVln⁡2
    4. nRln⁡2
    Answer and solution

    Answer: B

    dS=nCPdT/T at constant pressure, so ΔS=nCPln⁡2. Equivalently nCVln⁡2+nRln⁡(V2/V1) with V2/V1=2.
  30. NATExam level

    1 kg of water (c=4186 J kg−1 K−1) at 0∘C is put in contact with a large reservoir at 100∘C until it reaches 100∘C. The entropy of the universe increases by ______ J/K.
    Answer and solution

    Answer: 184 J/K (±1.5)

    Water: 4186ln⁡(373.15/273.15)=1305.8 J/K. Reservoir gives Q=418600 J at fixed 373.15 K: −1121.8 J/K. Total ≈+184 J/K.

← All topics · Timed mock test →