Polarisation: Malus, Brewster and wave plates
Oscillations, waves and optics · 74 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Polarisation: Malus, Brewster and wave plates.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Unpolarised light of intensity passes through an ideal polariser. The transmitted intensity is- zero
Answer and solution
Answer: B
Unpolarised light has its field direction changing randomly. Averaging Malus's over all directions gives , so gets through, polarised along the transmission axis. -
NATWarm-up
Linearly polarised light of intensity W/m² meets an analyser whose axis makes with the light's plane of polarisation. The transmitted intensity is ______ W/m².Answer and solution
Answer: 2 W/m² (±0.01)
Malus: W/m².Why people get this wrong: Using instead of gives 4 W/m²: the field goes as , the intensity as its square.
-
MCQWarm-up
The Brewster angle for light in air reflecting from glass of refractive index is aboutAnswer and solution
Answer: C
, so .Why people get this wrong: is the critical angle (a sine, not a tangent); is the Brewster angle from inside the glass.
-
MCQWarm-up
Which phenomenon shows that light is a transverse wave?- interference
- diffraction
- reflection
- polarisation
Answer and solution
Answer: D
Interference, diffraction and reflection happen for longitudinal waves (sound) too. Only a transverse wave has a direction of vibration across its path that a polariser can select. -
MCQWarm-up
Unpolarised light strikes glass at the Brewster angle. The reflected light is- completely polarised perpendicular to the plane of incidence
- completely polarised in the plane of incidence
- unpolarised
- circularly polarised
Answer and solution
Answer: A
At the Brewster angle the reflection coefficient for the component in the plane of incidence () is zero. Only the perpendicular () component reflects, so the reflected light is completely -polarised. The transmitted light is only partly polarised.Why people get this wrong: The transmitted beam is not completely polarised; only the reflected one is.
-
NATWarm-up
Linearly polarised light passes through an analyser and a quarter of its intensity gets through. The smallest angle between the analyser's axis and the plane of polarisation is ______ degrees.Answer and solution
Answer: 60 degrees (±0.1)
, so and .Why people get this wrong: Solving gives .
-
NATStandard
Unpolarised light of intensity W/m² falls on two crossed polarisers. A third polariser is slipped between them with its axis at to both. The intensity that emerges is ______ W/m².Answer and solution
Answer: 4 W/m² (±0.01)
After the first: . After the middle (): . After the last ( from the middle): W/m². Without the middle polariser nothing would get through.Why people get this wrong: Thinking an extra polariser can only remove light: here it lets light through.
-
NATStandard
Quartz has at nm. The thinnest quartz quarter-wave plate for this wavelength is ______ μm thick (to one decimal place).Answer and solution
Answer: 16.4 μm (±0.1)
A quarter-wave plate gives a path difference between the two rays: , so m m.Why people get this wrong: Using gives a half-wave plate (32.7 μm).
-
MCQStandard
At the Brewster angle, the reflected and refracted rays are- parallel
- perpendicular to each other
- at to each other
- both along the surface
Answer and solution
Answer: B
With and Snell's law, gives , so : the reflected and refracted rays are at right angles. Dipoles in the glass oscillating along the refracted ray's direction cannot radiate along their own axis, which is the reflected direction. -
MSQStandard
Which statements about an ideal quarter-wave plate are correct?- Linear light polarised at to its axes comes out circularly polarised.
- Linear light polarised along its fast axis comes out unchanged.
- Circularly polarised light comes out linearly polarised.
- It rotates any linear polarisation by .
Answer and solution
Answer: A, B, C
The plate delays one component by a quarter cycle. Equal components () a quarter cycle apart make circular light; the process runs backwards too (circular in, linear out at ). Light along one axis has only one component, so nothing changes. Rotating a linear polarisation is the job of a half-wave plate. -
MCQStandard
Linearly polarised light falls on a half-wave plate with its plane of polarisation at angle to the fast axis. The emerging light is- linearly polarised, rotated by
- linearly polarised, rotated by
- circularly polarised
- unchanged
Answer and solution
Answer: B
A half-wave delay flips the sign of the slow-axis component, so the light comes out at to the fast axis: still linear, mirrored about the axis, i.e. rotated by . At this turns horizontal into vertical. -
NATStandard
The Brewster angle for light in air reflecting from water () is ______ degrees (to one decimal place).Answer and solution
Answer: 53.1 degrees (±0.1)
. Polaroid sunglasses block the strongly polarised glare from lakes near this angle. -
MCQStandard
Partially polarised light is viewed through a rotating analyser. The largest transmitted intensity is three times the smallest. The degree of polarisation isAnswer and solution
Answer: A
: half the light is polarised and half unpolarised.Why people get this wrong: Taking as the answer.
-
NATStandard
A sugar solution of concentration g/cm³ in a tube cm long rotates the plane of polarisation by . The specific rotation, in degrees per decimetre per (g/cm³), is ______ (to one decimal place).Answer and solution
Answer: 66.5 °/(dm·g/cm³) (±0.1)
with in decimetres: .Why people get this wrong: Specific rotation uses the length in decimetres; using 20 cm gives 6.65.
-
MSQStandard
Which of these can produce polarised light from unpolarised light?- Reflection at the Brewster angle
- Scattering by particles much smaller than the wavelength, seen at
- Double refraction in a calcite crystal
- Passing through an ordinary glass lens at normal incidence
Answer and solution
Answer: A, B, C
Brewster reflection removes the component; Rayleigh scattering at can only send out the component perpendicular to the scattering plane; calcite splits light into two beams polarised at right angles. A lens at near-normal incidence treats both components almost alike. -
MCQStandard
Blue sky light is examined with a polariser. It is most strongly polarised in directions- towards the Sun
- directly opposite the Sun
- near the horizon at sunset, in the direction of the Sun
- at from the Sun
Answer and solution
Answer: D
Air molecules scatter like small dipoles driven by the sunlight's field, which lies across the Sun's direction. Seen at from the Sun, only one field direction can be seen oscillating, so the light is strongly polarised. Bees navigate with this pattern. -
MCQStandard
Which of these cannot be polarised?- radio waves
- X-rays
- sound waves in air
- transverse waves on a stretched string
Answer and solution
Answer: C
Polarisation describes the direction of a transverse oscillation. Sound in air is longitudinal (the air moves along the direction of travel), so there is no direction across the wave to pick. Radio waves and X-rays are electromagnetic (transverse); a string can be shaken in any transverse direction.Why people get this wrong: X-rays are just very short electromagnetic waves; they can be polarised (for example by scattering).
-
MCQStandard
Glass shows normal dispersion (its index is larger for blue light than for red). The Brewster angle for light in air reflecting from this glass is- slightly larger for blue light than for red light
- slightly larger for red light than for blue light
- the same for all colours
- not defined, because a dispersive medium has no Brewster angle
Answer and solution
Answer: A
, and grows with its angle. Blue light sees the larger , so its Brewster angle is a little larger. For crown glass ( red, blue) the two angles differ by only about .Why people get this wrong: Assuming the Brewster angle is a property of the surface alone; it depends on , which depends on wavelength.
-
MCQStandard
Linearly polarised light falls on an analyser that is slowly turned through a full circle. The transmitted intensity, plotted against the analyser angle, is- a curve of period with one zero per turn
- constant
- a curve of period with two zeros per turn
- a curve of period with four zeros per turn
Answer and solution
Answer: C
Malus's law: . This repeats every and is zero at and : two dark positions and two bright ones in one turn.Why people get this wrong: Treating like , which has period .
-
NATStandard
Unpolarised light passes through two ideal polarisers. If of the incident intensity gets through, the angle between their transmission axes is ______ degrees.Answer and solution
Answer: 30 degrees (±0.5)
The first polariser passes half: . The second passes of that, so , , and .Why people get this wrong: Forgetting the first factor gives and about .
-
MSQStandard
Which statements about an ideal linear polariser are true?- It passes exactly half the intensity of unpolarised light
- Whatever light goes in, any light that comes out is linearly polarised along its axis
- It passes all the intensity of circularly polarised light
- Placed at between two crossed polarisers, it lets light through where none passed before
Answer and solution
Answer: A, B, D
A polariser projects the field onto its axis, so the output is always linear along that axis. Unpolarised and circular light both give half (circular light has equal mean square components on every axis). Between crossed polarisers, a polariser passes of the light leaving the first polariser instead of none.Why people get this wrong: Thinking an extra polariser can only remove light; it changes the direction the next one sees.
-
NATExam level
Unpolarised light of intensity passes through a fixed polariser, then one rotating at a steady rate, then a third fixed one crossed with the first. The time-averaged transmitted intensity, as a fraction of , is ______ (to four decimal places).Answer and solution
Answer: 0.0625 (±0.0005)
With the middle polariser at angle : . The average of is , so . The light flickers at .Why people get this wrong: Averaging and separately and multiplying () is wrong: they are not independent.
-
MCQExam level
A light wave has and at a fixed point. It is- elliptically polarised, with the major axis along
- circularly polarised
- linearly polarised at to the axis
- elliptically polarised, with the major axis along
Answer and solution
Answer: A
: an ellipse with semi-axes along and along . The components are a quarter cycle apart but unequal, so it is elliptical, not circular.Why people get this wrong: A phase difference gives circular light only if the amplitudes are equal.
-
NATExam level
Unpolarised light of intensity passes through a polariser and then through five more polarisers, each turned further than the one before (so the last is at to the first). The emerging intensity, as a fraction of , is ______ (to three decimal places).Answer and solution
Answer: 0.303 (±0.002)
After the first: . Each further polariser multiplies by . Five of them: . With many small steps almost all the polarised light can be turned through . -
MSQExam level
For light in air reflecting from glass (), which statements are correct?- At normal incidence about of the intensity is reflected.
- For -polarised light the reflectance is zero at the Brewster angle.
- For -polarised light the reflectance rises steadily from to as the angle goes from to .
- The reflectance is larger than the reflectance at every angle.
Answer and solution
Answer: A, B, C
At normal incidence . falls from 4% to zero at , then rises to 100% at grazing. rises steadily. Between and , , which is why reflected glare is mostly -polarised. -
NATExam level
Calcite has and at nm. The thinnest calcite half-wave plate for this wavelength is ______ μm thick (to two decimal places).Answer and solution
Answer: 1.71 μm (±0.01)
: m. Calcite is so strongly birefringent that its wave plates are very thin; real ones are often made thicker as higher-order plates. -
MCQExam level
A beam gives the same intensity through a polariser at every orientation. To tell whether it is unpolarised or circularly polarised you should- rotate the polariser faster
- put a half-wave plate in front of the polariser
- put a quarter-wave plate in front of the polariser and rotate the polariser
- measure the intensity without the polariser
Answer and solution
Answer: C
A quarter-wave plate turns circular light into linear light, which a rotating polariser can then extinguish completely. Unpolarised light stays unpolarised after the plate and gives a constant intensity. A half-wave plate would only turn circular light into circular light of the opposite hand. -
NATExam level
Light in air falls on glass () at the Brewster angle. The reflectance for the -polarised component is ______ (to three decimal places).Answer and solution
Answer: 0.148 (±0.002)
Fresnel: . At Brewster with , : , . Equivalently . For unpolarised light only half of this, 7.4%, is reflected. -
MCQExam level
Polaroid sunglasses cut the glare from a wet road. Their transmission axes are- horizontal, to pass the reflected light
- at , to pass half of it
- random, as in unpolarised light
- vertical, to block the mostly horizontally polarised reflected light
Answer and solution
Answer: D
Light reflected from a horizontal surface near the Brewster angle is mostly -polarised: its field is parallel to the surface, horizontal. Vertical transmission axes block it. -
NATExam level
Light in air strikes a medium of refractive index at the Brewster angle. The angle of refraction is ______ degrees.Answer and solution
Answer: 30 degrees (±0.1)
gives . At Brewster incidence the refracted ray is at (check: ).