Phase changes and the Clausius-Clapeyron equation
Kinetic theory and thermodynamics · 67 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Phase changes and the Clausius-Clapeyron equation.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Ice and water coexist in equilibrium at a fixed temperature and pressure. Which molar quantity has the same value in the two phases?- The volume
- The Gibbs free energy
- The entropy
- The enthalpy
Answer and solution
Answer: B
Two phases can sit together in equilibrium at fixed and only if moving a mole from one to the other does not lower the total Gibbs energy, so the molar Gibbs energies (chemical potentials) are equal: . The volume, entropy and enthalpy all jump: water is denser, has more entropy, and the enthalpy difference is the latent heat .Why people get this wrong: Thinking the energy content is the same because the temperature is the same. Melting at constant still absorbs latent heat, so and differ.
-
NATWarm-up
One kilogram of ice melts at K. The latent heat of fusion is J/kg. The entropy of the water exceeds that of the ice by ______ J/K (to the nearest whole number).Answer and solution
Answer: 1223 J/K (±2)
The heat goes in reversibly at one fixed temperature, so J/K.Why people get this wrong: Using °C or °C in place of K. Entropy needs the absolute temperature.
-
MCQWarm-up
Along the line where two phases coexist, the slope of the pressure–temperature curve is given by the Clausius–Clapeyron equation. With the latent heat and the change in volume (both per mole), it readsAnswer and solution
Answer: C
Equal Gibbs energies along the line: , i.e. . So , and gives . A dimension check confirms it: J/(K m) = Pa/K.Why people get this wrong: The second option is , the slope of the curve with the axes swapped. Check which variable is on top.
-
MCQWarm-up
At the triple point of a pure substance, how many intensive variables can be changed freely while all three phases stay in equilibrium?Answer and solution
Answer: A
Gibbs phase rule: with component and phases, so . The triple point is a single point: one temperature and one pressure. That is why the triple point of water was long used to fix the kelvin.Why people get this wrong: Mixing up the number of phases with the number of components. Here there is one component and three phases.
-
MSQWarm-up
Which statements about the pressure–temperature phase diagram of water are correct?- The solid–liquid (melting) line slopes to the left: higher pressure means a lower melting point.
- Solid, liquid and vapour coexist at only one temperature and pressure.
- Above the critical temperature, liquid and vapour can no longer be told apart.
- At atm, ice turns straight into vapour without melting.
Answer and solution
Answer: A, B, C
First: ice is less dense than water, so melting lowers the volume () while ; Clausius–Clapeyron gives a negative slope. Second: the triple point. Third: the vaporisation line ends at the critical point; beyond it there is one fluid phase. Fourth: false. Water's triple-point pressure is only about Pa, far below atm, so at atm ice melts and then boils. Direct sublimation at atm is what carbon dioxide does (its triple point is above atm).Why people get this wrong: Ice does sublime slowly (freeze-dried food, snow vanishing on cold sunny days), but that is evaporation below the vapour pressure, not the equilibrium path at atm.
-
MCQWarm-up
Why does water boil below C high in the mountains?- Less oxygen in the air lowers the latent heat
- Cold air cools the pot, so it boils sooner
- The latent heat of vaporisation is smaller at altitude
- Water boils when its vapour pressure equals the outside pressure, and the outside pressure is lower
Answer and solution
Answer: D
Boiling starts when bubbles of vapour can form inside the liquid, which needs the vapour pressure to reach the surrounding pressure. The vapour pressure rises with temperature along the Clausius–Clapeyron curve. With a lower air pressure, that point is reached at a lower temperature: about C at atm.Why people get this wrong: The latent heat barely changes; it is the pressure that sets the boiling point.
-
NATStandard
Ice melts at K with latent heat J/kg. The densities of ice and water are and kg/m. The magnitude of the slope of the melting curve is ______ Pa/K (to two decimal places).Answer and solution
Answer: 1.35 $10^7$ Pa/K (±0.02)
Volume change per kilogram on melting: m/kg. Then Pa/K, about atm per kelvin. The minus sign says pressure lowers the melting point.Why people get this wrong: Using per-mole latent heat with per-kilogram volumes. and must refer to the same amount of substance.
-
MCQStandard
For most substances the melting temperature rises with pressure, but for water it falls. The reason is that, on melting,- water absorbs latent heat while most substances release it
- water's volume decreases, while most substances expand
- water's entropy decreases, while most substances gain entropy
- water has a triple point and most substances do not
Answer and solution
Answer: B
. Melting always absorbs heat (, entropy increases), so the sign of the slope is the sign of . Ice is an open hydrogen-bonded lattice; when it melts the molecules pack closer, so and the slope is negative. Most solids are denser than their liquid, so .Why people get this wrong: Melting never releases heat; only the volume change can flip the sign.
-
NATStandard
Water boils at K under Pa with molar latent heat kJ/mol. Treat the vapour as an ideal gas and neglect the liquid's volume. The slope of the vapour-pressure curve at this point is ______ kPa/K (to two decimal places). Take J mol K.Answer and solution
Answer: 3.56 kPa/K (±0.03)
With : Pa/K. One kelvin hotter, the vapour pressure is about % higher.Why people get this wrong: Forgetting to convert kJ to J gives an answer a thousand times too small.
-
MCQStandard
The integrated form for a vapour-pressure curve rests on several approximations. Which of these is NOT one of them?- The vapour behaves as an ideal gas
- The liquid's molar volume is negligible beside the vapour's
- The latent heat stays constant over the temperature range
- The heating takes place at constant volume
Answer and solution
Answer: D
Start from . Neglect the liquid volume, ; use the ideal gas, ; then , which integrates to the stated form if is constant. Nothing is held at constant volume: the system moves along the coexistence line, where both and change.Why people get this wrong: All the assumptions fail near the critical point, where the vapour is dense and .
-
NATStandard
A liquid boils at K under atm, and its molar latent heat of vaporisation is kJ/mol, taken as constant. Using the Clausius–Clapeyron equation with an ideal vapour, its vapour pressure at K is ______ atm (to three decimal places). Take J mol K.Answer and solution
Answer: 0.535 atm (±0.004)
. So atm.Why people get this wrong: Getting the sign wrong gives atm: a colder liquid must have a lower vapour pressure.
-
MCQStandard
In Ehrenfest's classification, a second-order phase transition is one in which- the entropy and volume are continuous but the heat capacity jumps
- there is a latent heat but no volume change
- the Gibbs energy itself jumps
- the entropy jumps but the volume does not
Answer and solution
Answer: A
Order = the lowest derivative of the Gibbs energy that is discontinuous. First order: and jump (latent heat, volume change). Second order: , and are continuous, but second derivatives such as , the expansion coefficient and the compressibility jump. No latent heat.Why people get this wrong: The Gibbs energy is continuous at every transition; it is equal in the two phases on the line.
-
MSQStandard
For a first-order phase transition of a pure substance at constant pressure, which statements are correct?- Heat is absorbed or released with no change of temperature.
- The molar entropy jumps by .
- A graph of the molar Gibbs energy of the stable phase against has a corner (a change of slope) at the transition.
- The heat capacity stays finite through the transition.
Answer and solution
Answer: A, B, C
First: latent heat goes in at fixed . Second: . Third: the stable phase is the lower of the two curves; they cross with different slopes and , so the lower envelope has a corner. Fourth: false. Heat is added with , so is infinite (a spike) at the transition.Why people get this wrong: A corner in is first order; a jump in the curvature of (with no corner) is second order.
-
MCQStandard
A pressure cooker keeps the steam at atm. Water's latent heat is kJ/mol and it boils at K at atm. The Clausius–Clapeyron equation (ideal vapour, constant ) gives the boiling temperature inside as about- C
- C
- C
- C
Answer and solution
Answer: C
K, so K C (measured: about C). Food cooks faster because the water is degrees hotter.Why people get this wrong: Doubling the pressure does not double the absolute temperature; is linear in , not in .
-
NATStandard
Water's molar latent heat of vaporisation at its normal boiling point, K, is kJ/mol. The molar entropy of vaporisation is ______ J mol K (to one decimal place).Answer and solution
Answer: 109.1 J mol⁻¹ K⁻¹ (±0.2)
J mol K. Most liquids give about – (Trouton's rule); water is higher because hydrogen bonds make the liquid unusually ordered, so more entropy is gained on boiling.Why people get this wrong: Leaving in kJ gives ; keep joules throughout.
-
MCQStandard
A pure liquid and its vapour are in equilibrium in a closed vessel. How many intensive variables can be chosen freely?- : the state is fixed
- : choose and the pressure follows
- : and independently
Answer and solution
Answer: B
. Fix the temperature and the pressure must be the vapour pressure at that temperature; the system lives on a line in the – plane.Why people get this wrong: The amounts of liquid and vapour can change, but they are not intensive variables.
-
MSQStandard
In which of these processes is latent heat absorbed?- Ice melting at C
- Dry ice (solid CO) subliming at atm
- Water warming from C to C
- Liquid helium-4 passing through its lambda point into the superfluid state
Answer and solution
Answer: A, B
Melting and sublimation are first-order transitions: they need latent heat at a fixed temperature. Warming water is ordinary sensible heat with a temperature rise, no phase change. The lambda transition of helium-4 is continuous (no latent heat), with a sharp peak in the heat capacity instead.Why people get this wrong: A heat-capacity spike is not a latent heat: the lambda transition absorbs heat only over a temperature range, however narrow.
-
MCQStandard
Water is boiling in an open pan at atm. While both liquid and vapour are present, the heat capacity of the water-plus-steam system at constant pressure is, in effect,- infinite
- equal to that of liquid water
- zero
- equal to that of steam
Answer and solution
Answer: A
Heat goes in () while the temperature stays at the boiling point (): it is used as latent heat. So is infinite during the transition. This divergence (a delta function in ) is the mark of a first-order transition.Why people get this wrong: Thinking of the heat capacity of each phase separately; for the two-phase system at fixed pressure, heat does not raise the temperature.
-
MCQStandard
How much heat turns g of ice at C into water at C? Take J g K, J/g and J g K.- 43.9 kJ
- 33.4 kJ
- 10.5 kJ
- 41.8 kJ
Answer and solution
Answer: A
Three steps: warm the ice to C, kJ; melt it, kJ; warm the water, kJ. Total kJ. Melting dominates: it takes as much heat as warming the water by about K.Why people get this wrong: Leaving out a step: 41.8 kJ forgets warming the ice, and 10.5 kJ forgets the latent heat.
-
NATExam level
Ice at K is put under an extra pressure of atm ( atm Pa). Latent heat of fusion J/kg; densities of ice and water and kg/m. Its melting point is lowered by ______ K (to two decimal places).Answer and solution
Answer: 0.75 K (±0.01)
Treat the slope as constant over this small range: . m/kg. K. A hundred atmospheres move the melting point by less than one degree.Why people get this wrong: Forgetting to convert atm to Pa gives a shift of K.
-
MCQExam level
A kg skater stands on one blade whose contact area with the ice is mm ( m/s). Using the melting-curve slope of ice, about Pa/K, the melting point under the blade drops by about- K
- K
- K
- K
Answer and solution
Answer: C
Pressure: Pa. Shift: K. So pressure melting alone could only help skating down to about C; people skate happily at C, so friction heating and a thin liquid-like layer on the ice surface do most of the work.Why people get this wrong: mm m, not m.
-
NATExam level
The vapour pressure of a liquid doubles when it is warmed from K to K. Assuming an ideal vapour and constant latent heat, the molar latent heat of vaporisation is ______ kJ/mol (to one decimal place). Take J mol K.Answer and solution
Answer: 27.7 kJ/mol (±0.1)
, so J/mol kJ/mol.Why people get this wrong: Using in place of : the variable that enters is .
-
MCQExam level
At fixed pressure, the molar Gibbs energies and of two phases are drawn against temperature. They cross at . Above the stable phase is- always the one with the smaller molar volume
- the one with the smaller molar entropy
- whichever one the system was in below
- the one with the larger molar entropy
Answer and solution
Answer: D
The stable phase has the lower . Since , each curve falls with slope . The phase with more entropy falls faster, so it is below the other after the crossing. This is why heating always takes a substance towards the higher-entropy phase (solid to liquid to gas).Why people get this wrong: Volume decides what pressure does (slope ), not what temperature does.
-
MSQExam level
For which of these transitions does the coexistence curve have a negative slope ?- Ice melting to water
- Copper melting
- Any liquid boiling to its vapour
- Gallium melting (solid gallium floats on its liquid)
Answer and solution
Answer: A, D
The slope is negative only when the volume falls on going to the higher-entropy phase. Ice and gallium (also bismuth, silicon, germanium) are less dense as solids, so they shrink on melting: negative slope. Copper, like most metals, expands on melting: positive. Boiling always increases the volume enormously, so every vaporisation curve has a positive slope.Why people get this wrong: "Floats on its liquid" is the clue: a less dense solid means on melting.
-
NATExam level
A gas obeys the van der Waals equation with Pa m mol and m mol. Its critical temperature is ______ K (to the nearest kelvin). Take J mol K.Answer and solution
Answer: 304 K (±1)
At the critical point the isotherm has an inflection with zero slope: and . For van der Waals this gives , , . So K. (These are roughly the constants of CO, whose real is K.)Why people get this wrong: Mixing up (critical temperature) with (the Joule–Thomson inversion temperature, larger by ).
-
MCQExam level
For a van der Waals gas, the critical compressibility factor isAnswer and solution
Answer: A
With , , : . It is the same for every van der Waals gas (real gases give –), an example of the law of corresponding states.Why people get this wrong: An ideal gas has ; at the critical point the gas is far from ideal.
-
MCQExam level
A cylinder of gas is held above its critical temperature and compressed slowly at constant temperature. What happens?- It condenses suddenly at some pressure, with a visible meniscus
- Its density rises smoothly; no meniscus ever forms
- It freezes directly into a solid
- Its pressure stays constant while its volume falls
Answer and solution
Answer: B
Above the isotherm has no flat (coexistence) part, so there is no point where two phases with different densities sit side by side. The fluid becomes as dense as a liquid without ever boiling or condensing. This is why gases such as nitrogen must first be cooled below before pressure can liquefy them.Why people get this wrong: A constant pressure while the volume falls is the signature of condensation below , not above it.
-
MCQExam level
Which of these is a continuous (second-order in Ehrenfest's sense) transition?- Water boiling at atm
- Ice melting at atm
- A metal becoming superconducting in zero magnetic field
- Dry ice subliming at atm
Answer and solution
Answer: C
In zero field the superconducting transition has no latent heat and no volume change; the heat capacity jumps at . Boiling, melting and sublimation all have latent heat: first order. (In a non-zero field the superconducting transition becomes first order, with a latent heat.)Why people get this wrong: Many students class every transition with a "sharp" change as first order. The test is latent heat.
-
MCQExam level
Trouton's rule says that many ordinary liquids have an entropy of vaporisation of about J mol K at their normal boiling point. A liquid boils at K at atm. Its latent heat of vaporisation is about- kJ/mol
- kJ/mol
- kJ/mol
- kJ/mol
Answer and solution
Answer: D
J/mol kJ/mol. Benzene, which boils at K, has kJ/mol.Why people get this wrong: Liquids with hydrogen bonds (water, alcohols) break the rule upwards; use it only as an estimate.
-
MSQExam level
Which statements about triple points are correct?- At the triple point the solid, liquid and vapour phases coexist in equilibrium.
- Applying extra pressure moves a substance's triple point to a higher temperature.
- Water's triple-point pressure (about Pa) is far below atm, so liquid water exists at atm.
- Carbon dioxide's triple-point pressure is above atm, which is why dry ice sublimes at atm.
Answer and solution
Answer: A, C, D
First: by definition. Second: false; the triple point is one fixed point (). Pressure moves the melting or boiling temperature, but then only two phases coexist. Third: liquid can exist only above the triple-point pressure; for water that is atm. Fourth: CO's triple point is at about atm and K, so at atm the solid goes straight to gas.Why people get this wrong: A triple point is not a line; you cannot slide along it.