Newton's laws, inertial and non-inertial frames
Mechanics and properties of matter · 86 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Newton's laws, inertial and non-inertial frames.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Which of the following is the best example of an inertial frame of reference?- A train speeding up along a straight track
- A car going round a circular track at constant speed
- A spaceship coasting with its engines off, far from all stars and planets
- A merry-go-round turning at a steady rate
Answer and solution
Answer: C
An inertial frame is one in which a free body (no net force) keeps moving in a straight line at constant speed. The speeding train is accelerating; the car and the merry-go-round turn, so their direction of motion keeps changing (they accelerate towards the centre). Only the coasting spaceship, with no force on it, moves with constant velocity, so a frame fixed to it is inertial.Why people get this wrong: Constant speed is not constant velocity: anything moving in a circle is accelerating.
-
NATWarm-up
A 2 kg block rests on a smooth horizontal floor. It is pulled by a force of 10 N directed at above the horizontal. Its acceleration (in m/s²) is ______.Answer and solution
Answer: 2.5 m/s² (±0.01)
Only the horizontal component moves the block along the floor: N. The vertical component, N, is less than the weight N, so the block stays on the floor (the normal force just gets smaller). Then m/s².Why people get this wrong: Using the full 10 N gives 5 m/s².
-
MCQWarm-up
A person of mass stands on a weighing scale in a lift that is accelerating upwards with acceleration . The scale readsAnswer and solution
Answer: A
Forces on the person: weight down, normal force (the scale reading) up. Newton's second law with up positive: , so . The person feels heavier.Why people get this wrong: The scale reads the normal force, not the weight.
-
MCQWarm-up
A book rests on a table. The Earth pulls the book downwards. According to Newton's third law, the partner (reaction) of this force is- the force of the book on the table
- the weight of the table
- the normal force of the table on the book
- the gravitational pull of the book on the Earth
Answer and solution
Answer: D
A third-law pair is the same interaction seen from both bodies: if A pulls B, B pulls A. The Earth pulls the book by gravity, so the partner is the book pulling the Earth (upwards) by gravity. The normal force also acts on the book, so it cannot be the partner; it is equal to the weight here only because the book is in equilibrium (second law).Why people get this wrong: Weight and normal force are equal and opposite here, but they act on the same body and are different kinds of force, so they are not a third-law pair.
-
NATWarm-up
Frame moves with velocity m/s relative to frame . A particle has velocity m/s in . Its speed in (in m/s, two decimal places) is ______.Answer and solution
Answer: 4.47 m/s (±0.01)
Galilean velocity addition: . Speed m/s.Why people get this wrong: Adding the frame velocity instead of subtracting gives .
-
MCQWarm-up
A frame moves with constant acceleration relative to an inertial frame. To use Newton's second law in this frame for a particle of mass , one must add a pseudo force- , since no extra force is needed
Answer and solution
Answer: B
In the inertial frame . The acceleration seen in the moving frame is , so . The extra term acts like a force pointing opposite to the frame's acceleration. That is why you are pushed back into your seat when a car speeds up.Why people get this wrong: The pseudo force points opposite to the frame's acceleration, not along it.
-
MCQWarm-up
A puck slides across smooth ice in a straight line at constant speed. The net force on it- is zero
- points along its velocity
- points opposite to its velocity
- equals its weight
Answer and solution
Answer: A
Constant velocity means zero acceleration, and by the second law zero net force. No force is needed to keep a body moving; that is Newton's first law.Why people get this wrong: The old (Aristotelian) idea that motion needs a force pushing along it.
-
MCQWarm-up
A 0.5 kg ball moving along with momentum 3 kg m/s hits a wall and leaves with momentum 2 kg m/s along . The contact lasts 0.1 s. The average force of the wall on the ball is- 10 N along
- 50 N along
- 10 N along
- 50 N along
Answer and solution
Answer: B
Newton's second law in momentum form: . With positive, kg m/s, so N: 50 N along , pointing away from the wall as it must.Why people get this wrong: Momentum is a vector: reversing direction adds the two sizes, it does not subtract them.
-
NATStandard
Two blocks of masses 3 kg and 5 kg hang at the two ends of a light string over a light frictionless pulley (an Atwood machine). Their acceleration (in m/s²) is ______.Answer and solution
Answer: 2.45 m/s² (±0.01)
Take the 5 kg block moving down. For it: . For the 3 kg block moving up: . Adding: , so m/s².Why people get this wrong: Dividing by the difference of masses instead of the total mass.
-
MCQStandard
In an Atwood machine with masses 3 kg and 5 kg, the tension in the string is- N
- N
- N
- N
Answer and solution
Answer: C
From with m/s²: N. The general formula is N. It lies between the two weights (29.4 N and 49 N), as it must: the heavy block is not in free fall and the light one is being lifted.Why people get this wrong: Taking the tension equal to either weight; it is neither, because both blocks accelerate.
-
MCQStandard
A block slides down a rough incline of angle with constant velocity. The coefficient of kinetic friction isAnswer and solution
Answer: A
Constant velocity means zero net force. Along the slope: ; perpendicular: . So . -
NATStandard
A 4 kg block lies on a horizontal floor with and . It is pushed horizontally with a force of 15 N. The friction force on the block (in N) is ______.Answer and solution
Answer: 15 N
First check whether it moves. Limiting static friction N. The push (15 N) is smaller, so the block stays at rest and static friction adjusts to balance the push exactly: 15 N.Why people get this wrong: Writing N or N: static friction is only as large as it needs to be.
-
MCQStandard
A small bob hangs by a string from the roof of a car that accelerates forward on a level road with acceleration . In equilibrium (relative to the car) the string- leans forwards, at to the vertical
- leans backwards, at to the vertical
- stays vertical
- leans backwards, at to the vertical
Answer and solution
Answer: D
In the car frame the bob feels gravity down and a pseudo force backwards. The string must line up with their sum, so it leans backwards with . (In the ground frame: the horizontal component of tension pulls the bob forward, and .)Why people get this wrong: is the angle with the horizontal, not with the vertical.
-
MCQStandard
A bob hangs by a string from the roof of a car that accelerates forward on a level road at m/s² ( m/s²). Relative to the car, the string makes an angle with the vertical of aboutAnswer and solution
Answer: B
, so .Why people get this wrong: is the angle with the horizontal; comes from using .
-
MCQStandard
In a frame rotating with constant angular velocity , a particle of mass at position moves with velocity relative to the frame. The Coriolis force on it isAnswer and solution
Answer: C
The equation of motion in a rotating frame is . The terms are the Coriolis force, the centrifugal force and the Euler force (zero for constant ).Why people get this wrong: Option B has the cross product reversed, so it has the opposite sign: .
-
MSQStandard
Which of these statements are correct?- A frame moving with constant velocity relative to an inertial frame is also inertial.
- In a frame with constant acceleration , Newton's second law works if the pseudo force is added.
- A frame fixed to the Earth's surface is exactly inertial.
- The acceleration of a particle is the same in all inertial frames related by Galilean transformations.
Answer and solution
Answer: A, B, D
A: differentiating twice gives , so a free body still moves uniformly. B: shown by . C is false: the Earth spins and orbits the Sun, giving small centrifugal and Coriolis effects (we treat it as inertial only approximately). D: the same calculation as A.Why people get this wrong: Statement C is "nearly" true, which is not the same as true.
-
NATStandard
A lift is moving downwards and slowing down at 2 m/s². A 60 kg person stands on a scale in it. The scale reads (in N) ______.Answer and solution
Answer: 708 N (±0.5)
Moving down and slowing down means the acceleration points up (it opposes the velocity). With up positive: , so N, more than the weight (588 N).Why people get this wrong: Taking "moving downwards" to mean the acceleration is downward gives 468 N. Direction of motion and direction of acceleration are different things.
-
MCQStandard
Blocks of 2 kg and 3 kg touch each other on a smooth floor. A horizontal force of 10 N pushes the 2 kg block, which pushes the 3 kg block. The force between the blocks is- 6 N
- 4 N
- 10 N
- 5 N
Answer and solution
Answer: A
Both move together: m/s². The only horizontal force on the 3 kg block is the contact force, so it equals N.Why people get this wrong: 4 N is the answer if the force pushes the 3 kg block instead (then the contact force accelerates the 2 kg block).
-
MCQStandard
A uniform rope of mass 2 kg and length 1 m lies on a smooth floor and is pulled at one end by a horizontal force of 10 N. The tension at a point 0.3 m from the pulled end is- 3 N
- 10 N
- 5 N
- 7 N
Answer and solution
Answer: D
The whole rope accelerates at m/s². The part beyond the point (length 0.7 m, mass 1.4 kg) is pulled only by the tension there: N. In general , falling to zero at the free end.Why people get this wrong: 3 N is the tension 0.3 m from the free end.
-
MCQStandard
Which of these quantities is NOT the same in two inertial frames related by a Galilean transformation?- The force between two particles
- The time between two events
- Kinetic energy of a particle
- Acceleration of a particle
Answer and solution
Answer: C
Velocities change by the constant frame velocity , so changes. Acceleration does not change (the derivative of a constant is zero), forces that depend on separations do not change, and Galilean time is absolute.Why people get this wrong: "NOT": three options are invariant, and you must pick the odd one out.
-
MCQStandard
A car goes round a level (unbanked) curve of radius 40 m. The coefficient of static friction between tyres and road is 0.5. The greatest speed at which it can take the curve without skidding is- 19.6 m/s
- 7 m/s
- 196 m/s
- 14 m/s
Answer and solution
Answer: D
Friction alone gives the centripetal force: , so m/s. The mass cancels.Why people get this wrong: 196 is , not .
-
MSQStandard
A block stays at rest on a rough horizontal floor while a horizontal force smaller than the limiting friction pushes it. Which are correct?- The friction force equals the applied force in size.
- The friction force equals .
- The net force on the block is zero.
- The normal force equals the weight.
Answer and solution
Answer: A, C, D
At rest, the net force is zero (C), so friction exactly cancels the push (A). The push is horizontal, so vertically only the weight and the normal force act, and they balance (D). Friction reaches only when slipping is about to start, so B is false.Why people get this wrong: is a maximum, not the actual value.
-
MCQStandard
A light spring balance hangs horizontally in the middle of a light string that runs over two smooth pulleys at the edges of a table. A 5 kg mass hangs from each end of the string, and everything is at rest. The balance reads- zero, because the two pulls cancel
- 10 kg
- 5 kg
- 2.5 kg
Answer and solution
Answer: C
Each mass is at rest, so the string holding it has tension . The string is light, so the tension is all along it, and the balance, which measures the tension pulling its hook, reads N, i.e. "5 kg". The other mass only provides the balancing pull that a wall or hook would supply if one side were tied down.Why people get this wrong: The net force on the balance is zero, but a balance shows the tension, not the net force.
-
NATStandard
A 2 kg block at rest on a smooth floor is pushed by a horizontal force N ( in s). Its speed at s is ______ m/s.Answer and solution
Answer: 6 m/s (±0.01)
m/s², so m/s. (Equivalently, the impulse N s, divided by 2 kg.)Why people get this wrong: is not constant, so with the final (12 m/s) is wrong.
-
MCQExam level
A block slides on a smooth incline of angle fixed inside a lift. The lift accelerates upwards at with m/s². The acceleration of the block relative to the incline is- m/s²
- m/s²
- m/s²
- m/s²
Answer and solution
Answer: D
In the lift frame add the pseudo force downwards. The block then feels an effective gravity m/s² downwards. Along the smooth incline: m/s².Why people get this wrong: Using instead of gives 4.9 m/s²; using gives 2.45 m/s².
-
MCQExam level
A small block is held against the vertical front face of a cart only by friction (coefficient ) as the cart accelerates forward with acceleration . The smallest for which the block does not slide down isAnswer and solution
Answer: B
The cart face pushes the block forward with normal force (this force gives the block its acceleration). Friction acts upwards and is at most . It must hold up the weight: , so .Why people get this wrong: The normal force here is horizontal and equals , not .
-
NATExam level
A 2 kg block sits on top of a 4 kg block that lies on a smooth floor. The coefficient of static friction between the blocks is 0.3. The largest horizontal force (in N) that can be applied to the lower block so that the blocks move together is ______.Answer and solution
Answer: 17.64 N (±0.1)
The upper block is moved only by friction, which can give it at most m/s². If the blocks move together, the whole 6 kg moves with this acceleration, so N.Why people get this wrong: Answering N, which is only the friction force, not the applied force.
-
NATExam level
A 1000 kg car drives due north at 20 m/s at latitude N. Take the Earth's angular speed as rad/s. The horizontal component of the Coriolis force on the car (in N) is ______.Answer and solution
Answer: 1.458 N (±0.02)
Only the vertical component of , which is , gives a horizontal Coriolis force on horizontal motion. So N, pointing east (to the right of the motion, as always in the northern hemisphere).Why people get this wrong: Using (2.53 N) or forgetting the factor 2 (0.73 N).
-
MCQExam level
A stone is dropped from rest from a tall tower on the equator. Neglecting air resistance, it lands- slightly north of the point vertically below
- exactly at the point vertically below
- slightly east of the point vertically below
- slightly west of the point vertically below
Answer and solution
Answer: C
In the Earth frame the Coriolis force is . At the equator points north and points down; points west, so the force points east. A picture without formulas: the top of the tower is farther from the axis than its foot, so it moves east faster; the stone keeps that extra eastward speed as it falls.Why people get this wrong: Thinking the Earth "turns away beneath" the stone, so it lands west. It is the other way round.
-
MCQExam level
Take rad/s and m for the Earth. The reduction in the effective value of at the equator because of the Earth's rotation is about- m/s²
- m/s²
- m/s²
- , since rotation does not change
Answer and solution
Answer: A
At the equator the centrifugal acceleration points straight up, against gravity: m/s². So , about 0.35% less than without rotation.