Moment of inertia and the axis theorems
Mechanics and properties of matter · 85 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Moment of inertia and the axis theorems.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The moment of inertia of a thin uniform ring of mass and radius about the axis through its centre perpendicular to its plane isAnswer and solution
Answer: C
Every bit of the ring is at the same distance from the axis, so . -
MCQWarm-up
The moment of inertia of a uniform disc of mass and radius about its central axis (perpendicular to the disc) isAnswer and solution
Answer: A
Split the disc into rings of radius , width , mass . Then .Why people get this wrong: is the disc about a diameter.
-
NATWarm-up
Two 2 kg point masses are fixed at the ends of a light rod 1 m long. The moment of inertia about an axis through the middle of the rod, perpendicular to it (in kg m²), is ______.Answer and solution
Answer: 1 kg m²
Each mass is 0.5 m from the axis: kg m².Why people get this wrong: Using the rod length (1 m) instead of the distance from the axis (0.5 m) gives 4.
-
MCQWarm-up
The radius of gyration of a uniform solid sphere of radius about a diameter isAnswer and solution
Answer: D
The radius of gyration is defined by . With , .Why people get this wrong: forgets the square root.
-
MCQWarm-up
A ring and a disc have the same mass and the same radius. About their central perpendicular axes,- it depends on the material
- the ring has the larger moment of inertia
- the disc has the larger moment of inertia
- they are equal
Answer and solution
Answer: B
All of the ring's mass is at the rim, at distance . Much of the disc's mass is closer to the axis. . -
MCQWarm-up
A flywheel with moment of inertia 2 kg m² spins at 10 rad/s. Its rotational kinetic energy is- 20 J
- 50 J
- 100 J
- 200 J
Answer and solution
Answer: C
J.Why people get this wrong: 200 J forgets the ½; 20 J uses instead of .
-
MCQWarm-up
Two small balls, each of mass , are fixed to the ends of a light rod of length . The moment of inertia about an axis through one ball, perpendicular to the rod, isAnswer and solution
Answer: B
. The ball on the axis has and adds nothing; the other is at : . (About the midpoint it would be .)Why people get this wrong: wrongly counts both balls as being a distance from the axis.
-
MCQStandard
The moment of inertia of a thin uniform rod of mass and length about an axis through one end, perpendicular to the rod, isAnswer and solution
Answer: A
Directly: . Or by the parallel axis theorem from the centre: . -
NATStandard
A uniform disc of mass 2 kg and radius 0.5 m turns about an axis perpendicular to its plane through a point on its rim. Its moment of inertia (in kg m²) is ______.Answer and solution
Answer: 0.75 kg m²
Parallel axis theorem: kg m². -
MCQStandard
The perpendicular axis theorem applies to- any rigid body
- only bodies with circular symmetry
- only axes through the centre of mass
- flat (planar) bodies lying in the -plane only
Answer and solution
Answer: D
, , . If every particle has (a lamina), then . The axes may cross at any point of the plane, not only the centre of mass.Why people get this wrong: D is false: the three axes must meet at a point in the plane, but it need not be the centre of mass.
-
MCQStandard
The moment of inertia of a uniform disc of mass 4 kg and radius 0.5 m about a diameter is- 0.125 kg m²
- 0.25 kg m²
- 0.5 kg m²
- 1 kg m²
Answer and solution
Answer: B
Perpendicular axis theorem: two perpendicular diameters have equal moments (by symmetry) and add up to . So each is kg m².Why people get this wrong: 0.5 kg m² is the moment about the central perpendicular axis.
-
MCQStandard
A thin ring of mass 2 kg and radius 1 m turns about a tangent lying in the plane of the ring. Its moment of inertia is- 2 kg m²
- 1 kg m²
- 3 kg m²
- 4 kg m²
Answer and solution
Answer: C
About a diameter the ring has (perpendicular axis theorem: two diameters add up to ). A tangent in the plane is parallel to a diameter at distance : kg m².Why people get this wrong: 4 kg m² () is the tangent perpendicular to the plane.
-
MCQStandard
The moment of inertia of a thin uniform spherical shell of mass and radius about a diameter isAnswer and solution
Answer: A
For any body, . For the shell every particle has , so the sum is , and by symmetry each moment is .Why people get this wrong: is the solid sphere, which has more mass near the centre.
-
MCQStandard
A uniform rectangular plate of mass 6 kg has sides 0.3 m and 0.4 m. Its moment of inertia about the axis through its centre perpendicular to the plate is- 0.045 kg m²
- 0.08 kg m²
- 0.25 kg m²
- 0.125 kg m²
Answer and solution
Answer: D
About the in-plane axes through the centre: and (each like a rod). Perpendicular axis theorem: kg m².Why people get this wrong: 0.045 and 0.08 kg m² are the two in-plane moments; the perpendicular one is their sum.
-
MSQStandard
Which statements about the parallel axis theorem are correct?- One of the two parallel axes must pass through the centre of mass.
- Of all axes in a given direction, the one through the centre of mass has the least moment of inertia.
- It can be used directly between any two parallel axes, with their separation.
- It applies to three-dimensional bodies as well as laminas.
Answer and solution
Answer: A, B, D
Proof: with , the cross term vanishes only because about the centre of mass. That is why A holds and C is false (between two arbitrary axes, go through the centre of mass: ). B: . D: nothing in the proof needs a flat body.Why people get this wrong: C is the classic misuse: for a rod, going from one end to a point away is not .
-
MCQStandard
Four 1 kg point masses sit at the corners of a square of side 1 m. Their moment of inertia about an axis along one side of the square is- 3 kg m²
- 2 kg m²
- 4 kg m²
- 1 kg m²
Answer and solution
Answer: B
The two masses on the axis contribute nothing. The other two are each 1 m away: kg m². -
MCQStandard
A uniform disc rolls without slipping. The fraction of its kinetic energy that is translational isAnswer and solution
Answer: C
with and : . Translational part is of the total.Why people get this wrong: is the answer for a solid sphere.
-
MSQStandard
The moment of inertia of a rigid body depends on- how its mass is distributed
- where the axis is
- the direction of the axis
- how fast the body is spinning
Answer and solution
Answer: A, B, C
with measured from the axis: it depends on the masses and their positions relative to the chosen axis (position and direction). It does not depend on the angular velocity, for a rigid body. -
MCQStandard
A thin uniform rod of mass and length has moment of inertia about the perpendicular axis through its centre. It is bent into a circular ring, whose moment of inertia about the axis through its centre perpendicular to its plane is . The ratio is- 1
Answer and solution
Answer: C
. The ring has circumference , so and . Ratio . Bending brings every bit of the rod within of the axis, while the straight rod's ends are away.Why people get this wrong: Mass and length are unchanged, but the distances from the axis are not.
-
NATStandard
A 2.0 kg body has moment of inertia 0.50 kg m² about an axis 0.30 m from its centre of mass. About a parallel axis 0.50 m from its centre of mass, its moment of inertia is ______ kg m².Answer and solution
Answer: 0.82 kg m² (±0.005)
The parallel axis theorem links any axis to the one through the centre of mass. First go to the centre: kg m². Then out to the new axis: kg m².Why people get this wrong: Adding (the distance between the two axes) is wrong: the theorem only works from the centre-of-mass axis.
-
NATExam level
A uniform solid cone has mass 5 kg and base radius 0.4 m. Its moment of inertia about its axis of symmetry (in kg m²) is ______.Answer and solution
Answer: 0.24 kg m² (±0.001)
Slice the cone into discs. At height from the tip the radius is and ; each disc gives . Integrating, , and with this is kg m².Why people get this wrong: Using the disc value : the cone has its mass concentrated towards the axis near the tip.
-
NATExam level
A uniform rod of mass 0.48 kg and length 1 m turns about an axis perpendicular to it through a point 0.25 m from one end. Its moment of inertia (in kg m²) is ______.Answer and solution
Answer: 0.07 kg m² (±0.001)
The axis is from the centre. kg m².Why people get this wrong: Adding to the end value : the theorem must start from the centre of mass.
-
MCQExam level
A disc of radius is cut out from the centre of a uniform disc of radius whose mass (before cutting) was . The moment of inertia of the remaining ring about the central perpendicular axis isAnswer and solution
Answer: A
Moments of inertia about the same axis add and subtract. The cut-out piece has a quarter of the area, so mass , and . Remaining: .Why people get this wrong: Taking the hole's mass as (half the radius, not a quarter of the area) gives .
-
NATExam level
A uniform disc of radius 2 m had a mass of 16 kg. A circular hole of radius 1 m is then cut, with its centre 1 m from the disc's centre. The moment of inertia of what is left, about the axis through the original centre perpendicular to the disc (in kg m²), is ______.Answer and solution
Answer: 26 kg m²
Full disc: kg m². The hole has a quarter of the area: mass 4 kg. About its own centre it has ; about the disc's centre (1 m away) add : 6 kg m². Remaining: kg m².Why people get this wrong: Subtracting only forgets the parallel-axis shift of the hole.
-
MCQExam level
Three identical uniform rods, each of mass and length , form an equilateral triangle. The moment of inertia about the axis through the centroid perpendicular to the triangle isAnswer and solution
Answer: D
The centroid is from the middle of each side, so . Each rod: . Three rods: .Why people get this wrong: comes from using the rods' own moments alone () without the shift.
-
MCQExam level
A thick-walled uniform hollow cylinder has inner radius 0.1 m, outer radius 0.2 m and mass 3 kg. Its moment of inertia about its axis is- 0.15 kg m²
- 0.075 kg m²
- 0.045 kg m²
- 0.06 kg m²
Answer and solution
Answer: B
Full cylinder minus the core, with mass in proportion to area: and , so kg m².Why people get this wrong: The formula has a plus sign: .
-
MSQExam level
For a uniform square plate of side and mass , which are correct?- Every axis in the plane of the plate through its centre has moment of inertia .
- About the axis through the centre perpendicular to the plate, .
- The moment about a diagonal is larger than about a line through the centre parallel to a side.
- About one edge, .
Answer and solution
Answer: A, B, D
Parallel to a side through the centre: (like a rod). B: perpendicular axis theorem, . A: the in-plane moments about axes through the centre satisfy (no product term by symmetry), and , so every direction gives the same value; C is therefore false. D: .Why people get this wrong: The diagonal "looks" longer, but by symmetry all in-plane central axes of a square are equal.
-
MCQExam level
A uniform solid sphere of mass 5 kg and radius 0.2 m turns about a tangent line. Its moment of inertia is- 0.2 kg m²
- 0.12 kg m²
- 0.28 kg m²
- 0.08 kg m²
Answer and solution
Answer: C
kg m².Why people get this wrong: 0.08 kg m² is the moment about a diameter.
-
MCQExam level
A ring, a solid disc, a solid sphere and a thin hollow sphere are released together from rest at the top of the same incline and roll without slipping. Which reaches the bottom first?- The solid sphere
- The solid disc
- The ring
- The hollow sphere
Answer and solution
Answer: A
Rolling down a slope, , independent of mass and radius. The smallest wins: solid sphere , disc , hollow sphere , ring 1.Why people get this wrong: Heavier or bigger bodies are not faster; only the shape factor matters.
-
NATExam level
A uniform solid cylinder rolls without slipping down a incline. Its acceleration (in m/s², two decimal places) is ______.Answer and solution
Answer: 3.27 m/s² (±0.01)
Taking torques about the contact point (instantaneous axis), with and : m/s².Why people get this wrong: m/s² is for sliding without friction.