Home / Courses / IIT JAM Physics / Practice / The method of images

The method of images

Electricity and magnetism · 12 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    For a point charge q above a large grounded metal plane, the image charge −q placed at the mirror point is chosen so that
    1. the electric field is zero on the plane
    2. the potential is zero everywhere on the plane
    3. the surface charge on the plane is zero
    4. the potential is zero at the position of q
    Answer and solution

    Answer: B

    Every point of the plane is equally far from q and from its mirror image, so kqr−kqr=0 there: the pair reproduces the boundary condition V=0 of the grounded plane. The field on the plane is not zero (it is normal to it), which is what produces the induced surface charge.

    Why people get this wrong: Confusing "zero potential" with "zero field" on the conductor's surface.

  2. NATStandard

    A charge of 1.0 nC sits 3.0 cm above a large grounded plane. With 1/(4πε0)=9×109 SI units, the potential at a point 3.0 cm above the plane and 4.0 cm sideways from the charge is ______ V (one decimal place).
    Answer and solution

    Answer: 100.2 V (±0.3)

    The point is 4.0 cm from the charge and 42+62=7.21 cm from the image −1.0 nC (which sits 3.0 cm below the plane). V=9×109×10−9(10.040−10.0721)=9×(25−13.87)=100.2 V.

    Why people get this wrong: Measuring the image distance as 4 cm too; the image is 6 cm lower than the point.

  3. MCQStandard

    A charge q is held at height d above a large grounded plane. The work needed to move it slowly a distance L parallel to the plane, keeping the height d, is
    1. kq2L4d2
    2. kq24d
    3. kq2L2d2
    4. zero
    Answer and solution

    Answer: D

    The image moves along with the charge, always straight below it, so the force on the charge is always perpendicular to the plane. Moving parallel to the plane, the displacement is perpendicular to the force: no work. (Equivalently, the energy −kq24d depends only on the height.)

    Why people get this wrong: Multiplying the attraction by the distance moved; the force and the motion are at right angles.

  4. MCQExam level

    A point charge q sits a distance d from a large grounded conducting plane. The work an external agent must do to pull it slowly away to infinity is
    1. q216πϵ0d
    2. q28πϵ0d
    3. q24πϵ0d
    4. q232πϵ0d
    Answer and solution

    Answer: A

    The attraction at distance x is that of the image −q at 2x: F=q24πϵ0(2x)2. Work =∫d∞q216πϵ0x2dx=q216πϵ0d. This is half the energy of a real pair ±q at separation 2d, because the field exists only on one side of the plane (and the image moves as the charge moves).

    Why people get this wrong: Using the energy of the charge-image pair, q2/(4πϵ0⋅2d), double-counts the empty half-space.

  5. MCQExam level

    A charge q sits at height d above a grounded conducting plane z=0. With r1 the distance to q and r2 the distance to the image point (0,0,−d), the potential is q4πϵ0(1r1−1r2)
    1. everywhere in space
    2. for z>0, and q4πϵ0r1 for z<0
    3. for z>0, and zero for z<0
    4. for z>0, and −q4πϵ0r2 for z<0
    Answer and solution

    Answer: C

    The image is a device to satisfy the boundary condition V=0 on the plane for the region containing the real charge. By uniqueness the formula is correct there (z≥0). Below the plane is conductor (or space shielded by it), where V=0; the image charge does not exist physically.

    Why people get this wrong: Treating the image as real and using its field below the plane.

  6. NATExam level

    Two equal charges +q sit on the same normal to a large grounded plane, at heights d and 2d. The net force on the upper charge is ______ ×q24πε0d2, upward taken as positive (three decimal places).
    Answer and solution

    Answer: 0.826 (±0.002)

    Images: −q at −d and −q at −2d. On the upper charge (at 2d): the real charge at d repels it, +1d2; the image at −d (distance 3d) attracts it, −19d2; its own image at −2d (distance 4d) attracts it, −116d2. Total: 1−19−116=119144=0.826 (in units of q24πε0d2).

    Why people get this wrong: Forgetting the image of the other charge; every real charge has its own image, and all act on each charge.

  7. MCQExam level

    A long straight wire carrying current I runs parallel to the flat surface of a superconductor, at height h. The superconductor keeps B→ out, so the normal component of B→ is zero at its surface. The wire is
    1. repelled, with force per unit length μ0I24πh
    2. attracted, with force per unit length μ0I24πh
    3. repelled, with force per unit length μ0I22πh
    4. not pushed either way
    Answer and solution

    Answer: A

    An image current at depth h below the surface, flowing the opposite way (−I), makes the two wires' fields cancel in the normal direction on the surface (their tangential components add). Opposite currents repel, and the separation is 2h: FL=μ0I⋅I2π(2h)=μ0I24πh. This is the principle of superconducting levitation.

    Why people get this wrong: Using the separation h instead of 2h, or giving the image the same direction (which would attract).

  8. MCQExam level

    A positive point charge sits above an infinite grounded metal plane. Of the electric field lines that leave the charge,
    1. half end on the plane and half go to infinity
    2. all end on the plane
    3. none end on the plane, because it is grounded
    4. the fraction ending on the plane depends on the height of the charge
    Answer and solution

    Answer: B

    The total charge induced on the infinite plane is exactly −q, whatever the height (integrate σ=−qd2π(x2+y2+d2)3/2 over the plane). Every field line ending on the plane ends on induced charge, and the flux of all the lines from q is q/ε0, so they all end there; above the plane the field falls off like a dipole's, and no net flux escapes to infinity.

    Why people get this wrong: Thinking lines going upward escape; they curve round and land on the plane far away.

  9. NATHard

    A wire carrying 100 A runs 1.0 cm above a flat superconducting surface (no normal B→ at the surface). The force per metre on the wire is ______ N.
    Answer and solution

    Answer: 0.1 N (±0.002)

    The image current −100 A lies 1.0 cm below the surface, 2.0 cm from the wire. FL=μ0I22π(2h)=2×10−7×1040.020=0.10 N/m, pushing the wire away from the surface.

    Why people get this wrong: Using h=1 cm as the separation, which doubles the force.

  10. MCQHard

    A small charged bead (mass m, charge q) is released from rest at height d above a large grounded metal plane in space (no gravity). The time it takes to reach the plane scales with d as
    1. d
    2. d1/2
    3. d3/2
    4. d2
    Answer and solution

    Answer: C

    The only force is the image attraction kq24z2, an inverse-square law like gravity. Dimensional analysis: the only time that can be built from m, d and kq2 is md3/(kq2), so t∝d3/2 (Kepler's third law for a straight-line orbit). Energy conservation gives exactly t=π22md3kq2.

    Why people get this wrong: Treating the force as constant (giving d1/2); it grows rapidly as the bead approaches the plane.

  11. MSQHard

    Which statements about the method of images are true?
    1. Image charges must lie outside the region where the solution is wanted
    2. The image solution is correct because it satisfies Poisson's equation in the region and the boundary conditions, and that solution is unique
    3. The energy of the real system equals the electrostatic energy of the real charges together with their images
    4. The force on a real charge equals the force that the image charges (and other real charges) would exert on it
    Answer and solution

    Answer: A, B, D

    Images are placed in the "forbidden" region (inside the conductor) so that Poisson's equation with the real charges is unchanged where we want the field; uniqueness then makes the solution right there. Forces follow from the field, so they are as if the images were real. Energy is different: the field exists only in the physical region, so for a charge and a grounded plane the energy is half that of the charge-image pair.

    Why people get this wrong: Computing energy from the full image picture; only the real half-space holds field.

← All topics · Timed mock test →