Home / Courses / IIT JAM Physics / Practice / Linear vector spaces and Dirac notation

Linear vector spaces and Dirac notation

Mathematical methods · 21 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these sets, with the usual addition and multiplication by real numbers, is a real vector space?
    1. All real 2×2 matrices with trace zero
    2. All polynomials of degree exactly 3
    3. All vectors (x,y,z) in ℝ3 with x+y+z=1
    4. All real 2×2 matrices with determinant zero
    Answer and solution

    Answer: A

    A subset is a vector space (a subspace) when it contains the zero vector and is closed under addition and scalar multiplication. Trace is linear: tr(aA+bB)=atrA+btrB, so traceless matrices stay traceless, and the zero matrix is traceless. Degree exactly 3 fails: x3+(−x3+x)=x has degree 1, and the zero polynomial is missing. The plane x+y+z=1 does not contain the zero vector. Determinant is not linear: diag(1,0)+diag(0,1)=I has determinant 1.

    Why people get this wrong: Check the zero vector first: a set that misses it can never be a vector space.

  2. NATWarm-up

    The dimension of the real vector space of all real symmetric 3×3 matrices is ______.
    Answer and solution

    Answer: 6

    A symmetric matrix is fixed by its diagonal (3 entries) and the entries above the diagonal (3 entries); the ones below are copies. A basis is the 3 matrices with a single 1 on the diagonal and the 3 matrices with 1 in positions (i,j) and (j,i). So the dimension is 3+3=6, or in general n(n+1)/2.

    Why people get this wrong: Counting all 9 entries ignores the constraint Aij=Aji.

  3. MCQWarm-up

    The norm of the vector (1+i, 2, −i)T in ℂ3 (standard inner product) is
    1. 5
    2. 7
    3. 3
    4. 7
    Answer and solution

    Answer: D

    ‖v‖2=∑|vk|2=|1+i|2+|2|2+|−i|2=2+4+1=7, so ‖v‖=7.

    Why people get this wrong: Squaring the components instead of taking |vk|2: (1+i)2+4+(−i)2=3+2i, which is not even real.

  4. MCQWarm-up

    The vectors (1,1,0), (0,1,1) and (1,0,1) in ℝ3
    1. are linearly dependent
    2. are linearly independent and form a basis of ℝ3
    3. are independent but span only a plane
    4. span a line
    Answer and solution

    Answer: B

    Put them as rows of a matrix: det⁡(110011101)=1(1−0)−1(0−1)+0=2≠0. Non-zero determinant means independent, and three independent vectors in a 3-dimensional space always form a basis.

    Why people get this wrong: Three independent vectors cannot "span only a plane": independence plus the right count already means a basis.

  5. MCQWarm-up

    The real vector space of all polynomials in x of degree at most 4 (with real coefficients) has dimension
    1. 4
    2. 5
    3. 6
    4. infinite
    Answer and solution

    Answer: B

    A basis is {1,x,x2,x3,x4}: every such polynomial is a unique combination of these five, and none of them is a combination of the others. So the dimension is 5.

    Why people get this wrong: Forgetting the constant term 1 gives 4.

  6. NATStandard

    Gram-Schmidt is applied to v→1=(1,1,0) and v→2=(1,0,1): u→2=v→2−v→2⋅v→1v→1⋅v→1v→1. The value of |u→2|2 is ______.
    Answer and solution

    Answer: 1.5 (±0.01)

    v→2⋅v→1=1 and v→1⋅v→1=2, so u→2=(1,0,1)−12(1,1,0)=(12,−12,1) and |u→2|2=14+14+1=1.5. Check: |v→2|2−(v→2⋅v→1)2/|v→1|2=2−12=1.5 (Pythagoras).

    Why people get this wrong: Dividing by |v→1| instead of |v→1|2 in the projection.

  7. MCQStandard

    In the orthonormal basis |e1⟩=(1,1)/2, |e2⟩=(1,−1)/2, the component of |v⟩=(3,1) along |e2⟩ is
    1. 22
    2. 2
    3. 1
    4. 2
    Answer and solution

    Answer: B

    In an orthonormal basis the component is the inner product: ⟨e2|v⟩=(3−1)/2=2/2=2. (Along |e1⟩: 4/2=22; check (2)2+(22)2=10=|v|2.)

    Why people get this wrong: Forgetting the 1/2 gives 2; taking the e1 component gives 22.

  8. NATStandard

    The dimension of the subspace of ℝ4 spanned by (1,0,1,0), (0,1,0,1), (1,1,1,1) and (1,−1,1,−1) is ______.
    Answer and solution

    Answer: 2

    Call them a,b,c,d. Then c=a+b and d=a−b, while a and b are independent. So the span is the plane spanned by a and b: dimension 2.

    Why people get this wrong: Four vectors do not mean four dimensions; look for combinations first.

  9. MCQStandard

    Consider smooth real functions f on [0,L] with the usual addition and scaling. Which set is NOT a vector space?
    1. All f with f(0)=f(L)=0
    2. All f with f′(0)=2f(0)
    3. All f with f(0)=1
    4. All f with f(0)=f(L)
    Answer and solution

    Answer: C

    A subset is a vector space exactly when it contains the zero function and is closed under addition and scaling. Linear, homogeneous conditions (the first, second and fourth) pass: if f and g satisfy them, so does af+bg. The condition f(0)=1 fails: the zero function is not in the set, and the sum of two such functions has f(0)+g(0)=2. This is why boundary conditions in eigenvalue problems are kept homogeneous.

    Why people get this wrong: A Robin condition like f′(0)=2f(0) looks complicated but is still linear and homogeneous.

  10. NATStandard

    With the inner product ⟨f,g⟩=∫01f(x)g(x)dx, the angle between the functions f=1 and g=x is ______ degrees.
    Answer and solution

    Answer: 30 (±0.5)

    ⟨1,x⟩=∫01xdx=12, ‖1‖2=1, ‖x‖2=∫01x2dx=13. So cos⁡θ=1/21⋅1/3=32 and θ=30∘.

    Why people get this wrong: Forgetting to take the square root of ‖x‖2 gives cos⁡θ=3/2, which is impossible.

  11. NATStandard

    In ℝ2, write (5,1)=c1(1,1)+c2(1,−1). The value of c2 is ______.
    Answer and solution

    Answer: 2

    Components: c1+c2=5 and c1−c2=1. Subtracting, 2c2=4, so c2=2 (and c1=3). Because these basis vectors are orthogonal (not normalised), also c2=(5,1)⋅(1,−1)(1,−1)⋅(1,−1)=42=2.

    Why people get this wrong: Taking the plain dot product (5,1)⋅(1,−1)=4 forgets to divide by the squared length of the basis vector.

  12. MCQExam level

    Which set of functions on the real line is linearly dependent?
    1. {1,x,x2}
    2. {ex,e2x}
    3. {sin⁡x,cos⁡x}
    4. {ex,e−x,cosh⁡x}
    Answer and solution

    Answer: D

    cosh⁡x=12ex+12e−x, a combination of the other two, so the set is dependent (its Wronskian is identically zero). The other sets have non-zero Wronskians, for example W(sin⁡,cos⁡)=−1.

    Why people get this wrong: Functions that look different can still be combinations of each other; write hyperbolic functions in exponentials.

  13. MCQExam level

    The map T(A)=A𝖳 (transpose) is a linear operator on the space of real 2×2 matrices. Its trace is
    1. 2
    2. 0
    3. 4
    4. −2
    Answer and solution

    Answer: A

    Use the basis E11,E12,E21,E22. T fixes E11 and E22 and swaps E12↔E21. Its 4×4 matrix has diagonal entries 1,0,0,1, so the trace is 2. Equivalently, symmetric matrices (a 3-dimensional space) have eigenvalue +1 and antisymmetric ones (1-dimensional) have −1: 3−1=2.

    Why people get this wrong: Confusing the trace of the operator T with the trace of a matrix A it acts on.

  14. MSQExam level

    For the vectors (1,2,3), (4,5,6) and (7,8,9) in ℝ3, which statements are true?
    1. They are linearly dependent
    2. Their span has dimension 2
    3. (1,1,1) lies in their span
    4. (1,0,0) lies in their span
    Answer and solution

    Answer: A, B, C

    (7,8,9)−(4,5,6)=(4,5,6)−(1,2,3)=(3,3,3), so (7,8,9)=2(4,5,6)−(1,2,3): dependent. The first two are not parallel, so the span is a plane (dimension 2). (1,1,1)=13[(4,5,6)−(1,2,3)] is in it. The plane's normal is (1,2,3)×(4,5,6)=(−3,6,−3)∝(1,−2,1); (1,0,0)⋅(1,−2,1)=1≠0, so (1,0,0) is not in the span.

    Why people get this wrong: Three vectors in ℝ3 need not span it; check the determinant (here 0).

  15. MSQExam level

    The map T(x,y,z)=(x+y, y+z, x−z) acts on ℝ3. Which statements are true?
    1. The rank of T is 2
    2. The kernel of T is spanned by (1,−1,1)
    3. T is invertible
    4. (1,0,0) is in the range of T
    Answer and solution

    Answer: A, B

    Kernel: x+y=0, y+z=0, x−z=0 gives y=−x, z=x: spanned by (1,−1,1). So nullity 1, rank 3−1=2, and T is not invertible. The range is a plane; note that (first) − (second) = (third) for every output: (x+y)−(y+z)=x−z. So every (a,b,c) in the range has a−b=c; for (1,0,0), 1−0≠0, so it is not in the range.

    Why people get this wrong: Rank + nullity = 3: once a non-zero kernel vector is found, invertibility is ruled out.

← All topics · Timed mock test →