Home / Courses / IIT JAM Physics / Practice / Einstein coefficients and lasers

Einstein coefficients and lasers

Atomic and molecular physics · 8 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The main job of the two mirrors of a laser (the optical resonator) is to
    1. pump atoms into the upper laser level
    2. feed light back through the gain medium many times, so that stimulated emission builds up in a few selected modes
    3. cool the gain medium
    4. absorb the spontaneous emission
    Answer and solution

    Answer: B

    A single pass through the gain medium amplifies light only a little. The mirrors send the light back and forth, so each round trip is amplified again; once the round-trip gain beats the losses, oscillation starts. The resonator also selects the allowed frequencies (longitudinal modes) and the beam shape (transverse modes). Pumping is done by a lamp, a diode or a discharge, not by the mirrors.

    Why people get this wrong: Mirrors do not create the inversion; they provide feedback.

  2. NATStandard

    A 1.0 W laser beam is focused to a uniform spot of radius 10 μm. The intensity is ______ ×109 W/m2 (two decimal places).
    Answer and solution

    Answer: 3.18 (±0.02)

    I=P/(πr2)=1.0/(π×(1.0×10−5)2)=1.0/(3.14×10−10)=3.18×109 W/m2, about 300 kW/cm2: thirty million times the intensity of sunlight at the ground. That is why even modest lasers can cut and why they are dangerous to eyes.

    Why people get this wrong: Squaring the radius in micrometres and forgetting to convert (10−5 m) gives an error of 1010.

  3. MCQStandard

    A He-Ne laser (632.8 nm) has mirrors 30 cm apart. The longitudinal mode it oscillates on has a mode number q (number of half-wavelengths between the mirrors) of the order of
    1. 103
    2. 106
    3. 109
    4. 10
    Answer and solution

    Answer: B

    Standing waves need L=qλ/2, so q=2L/λ=0.60/(632.8×10−9)=9.5×105≈106. Neighbouring modes (q and q+1) differ in frequency by only c/2L=500 MHz, a tiny fraction of the optical frequency.

    Why people get this wrong: q is not the number of modes that lase (a handful); it is the index of each one.

  4. MSQExam level

    Which pairings of laser and output wavelength are correct?
    1. ArF excimer: 694 nm
    2. He-Ne: 632.8 nm
    3. Nd:YAG: 1064 nm
    4. CO2: 10.6 μm
    Answer and solution

    Answer: B, C, D

    He-Ne gives red 632.8 nm (neon 3s→2p), Nd:YAG 1064 nm (Nd3+ 4F3/2→4I11/2), CO2 10.6 μm (a vibrational transition). ArF is a deep-UV excimer at 193 nm; 694.3 nm is ruby.

    Why people get this wrong: 694 nm belongs to ruby, the first laser (1960).

← All topics · Timed mock test →