Lagrangian mechanics
Classical mechanics (GATE and NET) · 16 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The number of degrees of freedom of a rigid body that can move freely in three-dimensional space isAnswer and solution
Answer: C
Three coordinates fix the position of one point (say the centre of mass) and three angles (for example the Euler angles) fix the orientation about it. Total .Why people get this wrong: Five is the count for a rigid rod or diatomic molecule, where rotation about the rod's own axis means nothing.
-
NATWarm-up
A molecule is modelled as two point atoms joined by a rigid bond, free to move in three dimensions. Its number of degrees of freedom is ______.Answer and solution
Answer: 5
Two free point particles have coordinates. The rigid bond adds one holonomic constraint, . So : three for the centre of mass and two angles for the direction of the bond. -
MCQWarm-up
The Lagrangian of a free particle of mass moving in a plane, written in plane polar coordinates , isAnswer and solution
Answer: B
The velocity has a radial part and a sideways part , at right angles. So , and with no potential .Why people get this wrong: The first option is not even dimensionally consistent: has units of 1/s while has m/s.
-
MCQWarm-up
A generalised coordinate is called cyclic (ignorable) when- along the motion
- the Lagrangian has no explicit time dependence
Answer and solution
Answer: D
If does not contain itself (it may contain ), the Euler-Lagrange equation gives . So the conjugate momentum is conserved.Why people get this wrong: A cyclic coordinate usually keeps changing. It is its conjugate momentum that stays constant, not .
-
MCQWarm-up
A thin rigid rod moves in a fixed vertical plane, and one end of it is forced to slide along a fixed horizontal straight line in that plane. The number of degrees of freedom is- 1
- 2
- 3
- 4
Answer and solution
Answer: B
A rigid body moving in a plane needs 3 numbers: the two coordinates of one point and one angle. Forcing the end to stay on the line fixes that end's height, one constraint. So : the position of the end along the line and the angle of the rod.Why people get this wrong: Counting 3 forgets the constraint; counting 1 treats the rod as if it could only slide (or only swing).
-
MCQStandard
A particle moves in a plane with . Which quantity is conserved because a coordinate is cyclic?Answer and solution
Answer: A
does not appear in , so (the angular momentum) is constant.Why people get this wrong: is the sideways linear momentum, which changes as changes.
-
NATStandard
An Atwood machine has masses 3 kg and 1 kg on a light string over a light frictionless pulley. Using the Lagrangian with the single coordinate (the drop of the 3 kg mass), the acceleration of the masses is ______ m/s² (take m/s²).Answer and solution
Answer: 4.9 m/s² (±0.05)
, . So . Euler-Lagrange: , m/s². -
MCQStandard
A simple pendulum (length ) hangs from the ceiling of a lift whose support moves as with constant upward acceleration . From the Lagrangian in the angle , the angular frequency of small oscillations isAnswer and solution
Answer: A
The bob is at , . So and . The cross term gives . The full equation is , so for small swings : an upward acceleration acts like extra gravity.Why people get this wrong: is the answer for a horizontal acceleration, where the effective gravity is tilted, not increased.
-
MCQStandard
A double pendulum has bob on a light rod from a fixed pivot and bob on a light rod hanging from ; the rods make angles , with the downward vertical and move in one vertical plane. The kinetic energy isAnswer and solution
Answer: C
Bob 1 moves at . Bob 2's velocity is the sum of (perpendicular to rod 1) and (perpendicular to rod 2). The angle between these two vectors equals the angle between the rods, , so . Adding gives the expression with in front of and in the cross term.Why people get this wrong: Bob 2 also carries the motion of bob 1, so appears in the term; and the cross term depends on the angle between the rods, .
-
NATStandard
A particle of mass 1 kg moves in a plane with , where N m². At an instant when m, and rad/s, the value of is ______ m/s².Answer and solution
Answer: 17 m/s²
The equation: . So m/s².Why people get this wrong: in means , an attraction, so the force term is ; flipping the sign gives 19.
-
NATExam level
A bead slides without friction on a rigid wire bent into a helix of radius m with a vertical axis: , , with m per radian. Take m/s². The magnitude of the bead's vertical acceleration is ______ m/s² (to two decimal places).Answer and solution
Answer: 0.98 m/s² (±0.01)
Use as the one generalised coordinate: , so the speed squared is . Then and . So m/s². The helix is just an inclined plane wrapped round a cylinder, with of its slope equal to .Why people get this wrong: Answering (the acceleration along the wire) instead of its vertical part, which carries one more factor .
-
MSQExam level
Which statements about generalised coordinates , generalised forces and conjugate momenta are correct?- A generalised coordinate need not have the dimension of length
- For a holonomic system the number of independent generalised coordinates equals the number of degrees of freedom
- always has the dimension of work
- always equals
Answer and solution
Answer: A, B, C
Angles, areas or any other parameters can serve as coordinates. Holonomic constraints can be solved to remove coordinates, leaving exactly as many as there are degrees of freedom. The virtual work is , so each is an energy: if is an angle, is a torque. only for a Cartesian coordinate of a free particle: for an angle, , and for a charge in a field .Why people get this wrong: Conjugate momentum is defined from , not as mass times velocity.