Heat capacity: Einstein and Debye
Solid state physics and devices · 15 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
According to the law of Dulong and Petit, the molar heat capacity of a monatomic solid at high temperature is ______ J mol K (to two decimal places). Use J mol K.Answer and solution
Answer: 24.94 J/(mol K) (±0.03)
Each atom is a 3D oscillator with of energy by equipartition. Per mole and J mol K.Why people get this wrong: Counting only kinetic energy gives , the monatomic gas value.
-
MCQWarm-up
At very low temperatures the lattice heat capacity of a three-dimensional insulating crystal varies asAnswer and solution
Answer: B
Only long-wavelength acoustic phonons, with , are excited. Their number in 3D grows as (a sphere of radius in -space), each holding about , so and : the Debye law.Why people get this wrong: is the Einstein model's prediction, which falls too fast; is the electronic term in metals; belongs to ferromagnetic magnons.
-
MCQWarm-up
The Einstein model of a solid assumes that- the crystal is an elastic continuum with sound waves up to a cutoff frequency
- the electrons carry most of the heat
- every atom vibrates independently as a quantum oscillator with the same frequency
- atoms obey classical equipartition at all temperatures
Answer and solution
Answer: C
Einstein (1907) treated the vibrational degrees of freedom as identical quantum oscillators of one frequency . This explained why falls below at low , the first success of quantum theory in solids. The continuum with a cutoff is Debye's later model.Why people get this wrong: Classical equipartition is exactly what Einstein replaced.
-
MCQWarm-up
The Debye temperature is defined by- , with the Debye cutoff frequency
- the melting point of the crystal
- the temperature at which
Answer and solution
Answer: A
converts the highest phonon frequency of the Debye model into a temperature. Well above all modes are excited (classical limit, ); well below it only a few are ().Why people get this wrong: is the Fermi temperature, about a hundred times larger in metals.
-
MCQWarm-up
Classical equipartition fails for lattice vibrations at low temperature because- the atoms stop moving entirely at low
- modes with are rarely excited, since the energy comes in quanta
- the crystal expands
- the number of modes grows as falls
Answer and solution
Answer: B
A quantum oscillator has mean thermal energy , which is when but exponentially small when . High-frequency modes "freeze out" and no longer store heat.Why people get this wrong: Atoms keep their zero-point motion even at ; it just does not change with , so it adds nothing to .
-
MCQWarm-up
At high temperature, the lattice heat capacity of NaCl per mole of formula units, in J mol K, is closest to ( J mol K)- 24.9
- 74.8
- 49.9
- 12.5
Answer and solution
Answer: C
One mole of NaCl contains ions, each contributing : J mol K.Why people get this wrong: Using per mole of formula units forgets that each formula unit has two atoms.
-
MCQWarm-up
At room temperature, which of these metals has the largest specific heat capacity per kilogram?- Lead
- Copper
- Aluminium
- Lithium
Answer and solution
Answer: D
Near the Dulong-Petit limit every mole of atoms needs about J/K, whatever the element. Per kilogram that is , largest for the lightest atoms: lithium ( g/mol) gives about kJ kg K, against for lead. (Lithium's Debye temperature, about K, keeps it a little below , but it still wins easily.)Why people get this wrong: The law fixes the heat capacity per mole of atoms, not per kilogram.
-
NATStandard
Using the Dulong-Petit law, the specific heat capacity of copper ( g/mol) at high temperature is ______ J kg K ( J mol K).Answer and solution
Answer: 392.5 (±4)
Molar heat capacity J mol K. One kilogram is mol, so J kg K. The measured value at room temperature, , is slightly lower because K is not far above copper's Debye temperature ( K).Why people get this wrong: Dividing by instead of (grams instead of kilograms) gives .
-
NATStandard
A kg aluminium block ( J kg K) at C is dropped into kg of water ( J kg K) at C in an insulated container of negligible heat capacity. The final temperature is ______ C (one decimal place).Answer and solution
Answer: 26.3 (±0.1)
Heat lost by the block equals heat gained by the water: , i.e. . So C. The water's heat capacity is over eleven times the block's, so the result sits close to C.Why people get this wrong: Averaging the two temperatures by mass ignores the very different specific heats.
-
MCQExam level
In the Debye model at , the thermal energy of the lattice (above the zero-point energy) varies asAnswer and solution
Answer: B
At low only modes with are excited. Their number grows as (the density of states ) and each carries energy , so , the same law as blackbody radiation. Then .Why people get this wrong: is the heat capacity; the energy has one more power.
-
MSQHard
Which statements about and of a substance are correct?- , which is never negative.
- .
- As , vanishes faster than .
- For water at C, is larger than .
Answer and solution
Answer: A, B, C
The general identity has and for a stable substance. The ratio of heat capacities equals the ratio of isothermal to adiabatic compressibilities. As , vanishes (third law), so goes to zero faster than . At C water has its density maximum, , so there exactly.Why people get this wrong: is usual, not universal: it fails, becoming an equality, wherever .