Home / Courses / IIT JAM Physics / Practice / Bonding in solids

Bonding in solids

Solid state physics and devices · 18 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which type of bond is strongly directional and saturable (each atom forms a fixed number of bonds at fixed angles)?
    1. metallic
    2. ionic
    3. covalent
    4. van der Waals
    Answer and solution

    Answer: C

    A covalent bond is a pair of electrons shared in overlapping orbitals between two particular atoms. Orbital shapes fix the angles (the sp3 tetrahedron in Si), and once the valence orbitals are used no more bonds form. Ionic, metallic and van der Waals bonds act between all neighbours and do not care about direction, so those solids pack densely.

    Why people get this wrong: Ionic bonds are strong, but strength is not direction: the Coulomb force is central.

  2. MCQWarm-up

    The attractive van der Waals (London) potential energy between two neutral, non-polar atoms a distance r apart varies as
    1. −1/r
    2. −1/r3
    3. −1/r12
    4. −1/r6
    Answer and solution

    Answer: D

    A momentary dipole p on one atom makes a field ∝p/r3 at the other, which induces a dipole αp/r3. The energy of that induced dipole in the field is ∝−αp2/r6. Averaged over the fluctuations, the attraction goes as −1/r6.

    Why people get this wrong: 1/r3 is the field of a dipole (and the energy between two fixed dipoles); 1/r12 is the conventional repulsion.

  3. MCQWarm-up

    The Madelung constant of the NaCl structure, referred to the nearest-neighbour distance, is closest to
    1. 1.000
    2. 1.386
    3. 1.748
    4. 6.000
    Answer and solution

    Answer: C

    Summing ±1/(distance/r0) over all ions around one ion (6 opposite at r0, 12 like at 2r0, 8 opposite at 3r0, ...) converges, with care, to α=1.7476. 1.386 (=2ln⁡2) is the value for a 1D alternating chain; 6 is just the first shell.

    Why people get this wrong: Keeping only the nearest neighbours (6) hugely overestimates the binding: the next shell repels.

  4. MCQWarm-up

    Solid argon is held together by
    1. ionic bonds
    2. van der Waals forces between fluctuating dipoles
    3. metallic bonding by free electrons
    4. covalent bonds between atoms
    Answer and solution

    Answer: B

    Argon atoms have closed shells: no electrons to share or give away. The only attraction is the London dispersion force between correlated fluctuating dipoles, which is weak (about 0.08 eV per atom), so argon melts at 84 K.

    Why people get this wrong: Closed-shell atoms cannot form covalent bonds; there is nothing to pair.

  5. MSQStandard

    Which properties are typical of ionic crystals such as NaCl?
    1. high melting point; hard but brittle
    2. good electrical conduction in the solid state
    3. electrical conduction when molten or dissolved
    4. strong infrared absorption at the transverse optical phonon frequency
    Answer and solution

    Answer: A, C, D

    Strong, non-directional Coulomb binding gives high melting points; shifting one layer by half a cell brings like ions face to face, so the crystal cleaves rather than bends (brittle). All electrons are tightly bound to the ions, so the solid is an insulator, but the ions themselves carry current once they can move (melt or solution). The oppositely charged sublattices vibrating against each other form an oscillating dipole that absorbs infrared strongly near ωTO (the reststrahlen band).

    Why people get this wrong: Ions conduct only when mobile; in the solid they are locked in place.

  6. MCQStandard

    The angle between two bonds from one carbon atom in diamond is
    1. 90∘
    2. 120∘
    3. 109.47∘
    4. 104.5∘
    Answer and solution

    Answer: C

    Each atom bonds to four neighbours at the corners of a regular tetrahedron, along (1,1,1), (1,−1,−1), (−1,1,−1), (−1,−1,1). The angle between two of these: cos⁡θ=(1−1−1)/3=−1/3, θ=109.47∘ (sp3 hybrids).

    Why people get this wrong: 120∘ is sp2 (graphite, graphene); 104.5∘ is the water molecule.

  7. MCQStandard

    The ductility of most metals is best explained by
    1. the directional nature of metallic bonds
    2. the non-directional bonding by a sea of shared conduction electrons
    3. the large Madelung constant of metals
    4. hydrogen bonds between neighbouring atoms
    Answer and solution

    Answer: B

    In a metal the valence electrons are shared by the whole crystal. The energy depends mainly on the density, not on bond angles, so planes of ions can slide past each other (by dislocation motion) without breaking specific bonds.

    Why people get this wrong: Directional bonds (covalent) make solids hard and brittle, the opposite of ductile.

  8. MCQStandard

    The open, low-density crystal structure of ordinary ice (less dense than water) is due to
    1. ionic bonds between H+ and O2−
    2. metallic bonding
    3. van der Waals forces alone
    4. hydrogen bonds that hold each molecule to four neighbours tetrahedrally
    Answer and solution

    Answer: D

    Each H2O molecule donates two hydrogen bonds and accepts two, so every oxygen sits at the centre of a tetrahedron of oxygens. Like the diamond structure, this is a very open arrangement. On melting some hydrogen bonds break, the network collapses partly, and the liquid is denser.

    Why people get this wrong: Van der Waals forces are present but weak and non-directional; they would favour close packing.

  9. MCQStandard

    Pauling's estimate of the fractional ionic character of a bond is 1−e−(Δχ)2/4, where Δχ is the electronegativity difference. For Na (χ=0.93) and Cl (χ=3.16) it is about
    1. 0.29
    2. 0.71
    3. 0.56
    4. 0.99
    Answer and solution

    Answer: B

    Δχ=3.16−0.93=2.23, (Δχ)2/4=4.97/4=1.243, e−1.243=0.288. Ionic character =1−0.288=0.71: NaCl is mostly but not purely ionic. For Si-Si (Δχ=0) the formula gives 0, pure covalent.

    Why people get this wrong: 0.29 is the covalent fraction e−(Δχ)2/4, not the ionic one.

  10. MCQStandard

    Which of these interactions between two neutral molecules does NOT fall off as 1/r6?
    1. The London (dispersion) energy between two non-polar atoms
    2. The Keesom energy between two freely rotating polar molecules, averaged over orientations at temperature T
    3. The energy between two polar molecules whose dipoles are held fixed in a given orientation
    4. The Debye energy between a polar molecule and the dipole it induces in a non-polar one
    Answer and solution

    Answer: C

    Two fixed dipoles interact as μ2/r3 (times an angle factor), much longer-ranged. London: fluctuating dipole × induced dipole ∝α2/r6. Debye: field ∝μ/r3 induces αE, energy ∝αμ2/r6. Keesom: thermal averaging over orientations cancels the 1/r3 term, leaving −23μ4/(kBTr6) (in Gaussian-style units). All three "van der Waals" terms go as 1/r6.

    Why people get this wrong: The thermal averaging is what turns the 1/r3 dipole-dipole energy into 1/r6.

  11. NATExam level

    Three point ions, −e, +2e, −e, lie on a line with spacing r (the +2e in the middle). Their total Coulomb energy is ______ ke2/r (one decimal place, with sign).
    Answer and solution

    Answer: -3.5 $ke^2/r$ (±0.01)

    Sum over pairs: two neighbour pairs (−1)(+2)/r each give −2ke2/r, total −4; the end pair (−1)(−1)/(2r) gives +0.5. Total −3.5ke2/r.

    Why people get this wrong: Leaving out the repulsion of the two outer ions gives −4.

  12. MCQExam level

    H2 and D2 have the same electronic potential curve (same well depth). Their dissociation energies D0, measured from the lowest vibrational level,
    1. are equal, because the potential is the same
    2. are larger for H2, because hydrogen vibrates faster
    3. differ by a factor of 2, the mass ratio
    4. are larger for D2, because its zero-point energy is smaller
    Answer and solution

    Answer: D

    D0=De−12ℏω, with ω=k/μ. The force constant is the same, but D2 has twice the reduced mass, so its 12ℏω is smaller by 2 (about 0.19 eV against 0.27 eV). D2 starts deeper in the well and needs more energy to break: about 4.56 eV against 4.48 eV.

    Why people get this wrong: Same potential does not mean same binding: the zero-point energy depends on the mass.

  13. MSQExam level

    Which statements about graphite are correct?
    1. Within each layer, every carbon forms three sp2 bonds at 120∘.
    2. The layers are held together by weak van der Waals forces, so graphite cleaves and slides easily.
    3. Graphite conducts electricity well along the layers, thanks to the delocalised π electrons.
    4. Graphite is harder than diamond in every direction, since its in-plane bonds are stronger.
    Answer and solution

    Answer: A, B, C

    Each carbon uses three sp2 hybrids for in-plane σ bonds at 120∘; the fourth electron sits in a pz orbital and joins a delocalised π system, giving metallic-like in-plane conduction. The layers, 3.35 Å apart, are bound only by van der Waals forces, so graphite is soft and a lubricant. The in-plane bond is indeed slightly stronger than diamond's, but the weak interlayer binding makes the crystal as a whole soft.

    Why people get this wrong: A strong bond in one direction does not make a hard crystal if another direction is weak.

← All topics · Timed mock test →