Home / Courses / GATE Physics / Practice / X-ray diffraction and Bragg's law

X-ray diffraction and Bragg's law

Solid state physics and devices · 43 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQStandard

    Which statements about the structure factor Fhkl=∑jfje2πi(hxj+kyj+lzj) are correct?
    1. For bcc with identical atoms, F=0 when h+k+l is odd.
    2. For fcc with identical atoms, F=0 when h,k,l are of mixed parity.
    3. For the diamond structure, the (200) reflection is allowed.
    4. The intensity of a reflection is proportional to |Fhkl|2.
    Answer and solution

    Answer: A, B, D

    bcc: true: F=f(1+eiπ(h+k+l)). fcc: true: F=f(1+eiπ(h+k)+eiπ(k+l)+eiπ(h+l)), which is 4f for unmixed and 0 for mixed indices. Diamond (200): false. Diamond multiplies the fcc factor by 1+eiπ(h+k+l)/2; for (200) this is 1+eiπ=0. Intensity: true (times the multiplicity and the angle factors).

    Why people get this wrong: Diamond has an fcc lattice, so students assume the fcc rule is the whole story. The second atom of the basis removes more lines.

  2. MCQStandard

    The atomic scattering (form) factor f of an atom with atomic number Z, as a function of sin⁡θ/λ,
    1. is zero at θ=0 and rises to Z
    2. is constant and equal to Z
    3. grows as sin⁡θ/λ increases
    4. equals Z at θ=0 and falls as sin⁡θ/λ increases
    Answer and solution

    Answer: D

    In the forward direction all Z electrons scatter in step, so f(0)=Z. At larger angles waves from different parts of the electron cloud get out of step and partly cancel, so f falls. This is one reason high-angle peaks are weaker.

    Why people get this wrong: Treating the atom as a point scatterer with f=Z at every angle.

  3. NATStandard

    Tungsten is bcc with a=3.165 Å. With Cu Kα1 X-rays (λ=1.5406 Å), the Bragg angle θ of its first powder line is ______ degrees (to two decimal places).
    Answer and solution

    Answer: 20.13 degrees (±0.03)

    For bcc, h+k+l must be even, so the first line is (110): d=a/2=2.238 Å. sin⁡θ=λ/2d=1.5406/4.476=0.3442, so θ=20.13∘ (2θ=40.27∘).

    Why people get this wrong: (100) is missing for bcc; using d=a gives 14.1∘, where no line appears.

  4. NATExam level

    A powder peak at 2θ=40∘, measured with λ=0.154 nm, has a width (FWHM, after removing the instrument's width) of 0.50∘ in 2θ. With Scherrer constant K=0.9, the crystallite size is ______ nm (to one decimal place).
    Answer and solution

    Answer: 16.9 nm (±0.2)

    Scherrer: τ=Kλβcos⁡θ with β in radians and θ half the peak position. β=0.50×π/180=8.727×10−3 rad, cos⁡20∘=0.9397. τ=0.9×0.1548.727×10−3×0.9397=16.9 nm.

    Why people get this wrong: Leaving β in degrees (gives 0.3 nm) or using cos⁡40∘ instead of cos⁡20∘.

  5. MSQExam level

    KCl has the rock-salt structure (cube edge a), yet its powder pattern looks like that of a simple cubic crystal. Which statements are correct?
    1. K+ and Cl− have the same number of electrons, so their form factors are nearly equal.
    2. Reflections with h,k,l all odd almost vanish.
    3. The apparent simple cubic lattice constant is 2a.
    4. The true Bravais lattice of KCl is fcc.
    Answer and solution

    Answer: A, B, D

    For rock salt, F=4(f++f−) for all-even and 4(f+−f−) for all-odd indices. Equal electrons: true: both ions have 18. All-odd vanish: true, since f+≈f−. 2a: false. Only all-even lines remain, (200),(220),(222),…, which look like (100),(110),(111) of a simple cubic lattice with edge a/2, the K-Cl distance. fcc: true: the X-rays simply cannot tell K+ from Cl−.

    Why people get this wrong: A pattern that looks simple cubic need not be simple cubic: nearly identical scatterers can hide the real lattice.

  6. NATExam level

    On heating a crystal, a Bragg peak at θ=30.00∘ moves to θ=29.95∘ (same wavelength). The fractional increase in the plane spacing, Δd/d, is ______ ×10−3 (to two decimal places).
    Answer and solution

    Answer: 1.51 (±0.02)

    Differentiate 2dsin⁡θ=nλ at fixed λ: Δdsin⁡θ+dcos⁡θΔθ=0, so Δdd=−cot⁡θΔθ. With Δθ=−0.05∘=−8.727×10−4 rad and cot⁡30∘=1.732: Δd/d=1.51×10−3. Lattice expansion moves peaks to lower angles.

    Why people get this wrong: Using Δθ in degrees (gives 0.087), or tan⁡θ instead of cot⁡θ.

  7. MCQExam level

    CsCl has Cs at (0,0,0) and Cl at (12,12,12) in a cubic cell. The structure factor of the (100) reflection is
    1. fCs+fCl
    2. 0
    3. fCs−fCl
    4. 2fCs
    Answer and solution

    Answer: C

    F=fCs+fCleiπ(h+k+l). For (100), h+k+l=1 and eiπ=−1, so F=fCs−fCl: weak but not zero, because the two ions differ. If both atoms were the same (bcc) this line would vanish.

    Why people get this wrong: Applying the bcc rule and answering 0. The bcc rule needs identical atoms at the corner and the centre.

  8. NATExam level

    Neutrons of kinetic energy 0.025 eV are used for diffraction. Their wavelength is ______ Å (to two decimal places). Take mn=1.675×10−27 kg.
    Answer and solution

    Answer: 1.81 Å (±0.02)

    λ=h2mnE=6.626×10−342×1.675×10−27×0.025×1.602×10−19=6.626×10−343.663×10−24=1.81×10−10 m. Thermal neutrons are naturally the right wavelength for crystals.

    Why people get this wrong: Forgetting to convert eV to joules (multiply by 1.602×10−19).

  9. MCQExam level

    In the Ewald construction (wave vector k→ of length 2π/λ ending at the reciprocal-lattice origin), a diffracted beam appears when
    1. a reciprocal-lattice point lies on the sphere of radius 2π/λ centred at the start of k→
    2. the sphere encloses the reciprocal-lattice origin
    3. a direct-lattice point lies on the sphere
    4. the sphere has radius equal to the lattice constant
    Answer and solution

    Answer: A

    Elastic scattering keeps |k→′|=|k→|, so the scattered wave vector ends on the sphere. The Laue condition requires k→′−k→=G→. Both hold when a reciprocal-lattice point (other than the origin) lies on the sphere; the diffracted beam then points from the sphere's centre to that point.

    Why people get this wrong: Using the direct lattice: the construction lives in reciprocal space.

  10. MCQExam level

    Which reflection is allowed for an fcc lattice of identical atoms but missing for the diamond structure?
    1. (200)
    2. (220)
    3. (111)
    4. (311)
    Answer and solution

    Answer: A

    The diamond structure factor is Ffcc×[1+eiπ(h+k+l)/2]. For (200): 1+eiπ=0. For (220): 1+e2πi=2. For (111) and (311): 1±i, of size 2. So (200) (and also (222)) disappear in diamond.

    Why people get this wrong: All four are allowed for fcc. The extra cancellation comes from the second atom at (14,14,14).

  11. MSQExam level

    A crystal is heated (well below melting). Which changes in its X-ray diffraction pattern are expected from the extra thermal vibration of the atoms?
    1. The Bragg peak intensities decrease.
    2. The decrease is larger for high-angle peaks than for low-angle ones.
    3. The Bragg peaks become much broader.
    4. The diffuse background between the peaks rises.
    Answer and solution

    Answer: A, B, D

    The Debye-Waller factor multiplies each peak by e−2W with 2W∝G2⟨u2⟩: lower peaks (true), much more so at large G, i.e. high angle (true). The intensity taken from the peaks reappears as thermal diffuse scattering between them (true). The peaks stay sharp (false): vibration does not destroy the long-range order, it only blurs each atom about its site.

    Why people get this wrong: Expecting thermal motion to broaden the peaks. Broadening comes from small crystallites or strain, not from vibration.

  12. MCQExam level

    With k→ and k→′ the incident and scattered wave vectors in elastic scattering from a crystal, the Laue condition for a diffracted beam is
    1. k→′+k→=G→ for some reciprocal-lattice vector G→
    2. k→′−k→=G→ for some reciprocal-lattice vector G→
    3. k→′⋅k→=0
    4. |k→′|−|k→|=|G→|
    Answer and solution

    Answer: B

    Waves scattered from all lattice points add in phase when (k→′−k→)⋅R→=2π× integer for every lattice vector R→, which is the definition of a reciprocal-lattice vector. With |k→′|=|k→|=2π/λ (elastic), |G→|=2ksin⁡θ, and |G→hkl|=2πn/d gives 2dsin⁡θ=nλ: Bragg's law.

    Why people get this wrong: Subtracting magnitudes: elastic scattering keeps |k→| fixed, so it is the vector difference that equals G→.

  13. NATExam level

    In a time-of-flight neutron diffractometer, neutrons travel 10.0 m in total from the source via the sample to a detector at scattering angle 2θ=90∘. A Bragg peak arrives 5.00 ms after the pulse. With h/mn=3.956×10−7 m2/s, the spacing of the reflecting planes is ______ Å (to two decimal places).
    Answer and solution

    Answer: 1.4 Å (±0.01)

    Speed v=10.0/5.00×10−3=2000 m/s. Wavelength λ=h/mnv=3.956×10−7/2000=1.978×10−10 m =1.978 Å. Bragg: d=λ/2sin⁡θ=1.978/(2sin⁡45∘)=1.40 Å. At a fixed angle, later arrivals are slower neutrons, longer wavelengths and larger d.

    Why people get this wrong: The Bragg angle is 45∘, half the scattering angle.

  14. MCQExam level

    An unpolarised X-ray beam is scattered by an electron. Compared with forward scattering, the intensity scattered at 2θ=90∘ (same distance) is reduced by the polarisation factor
    1. 1/2
    2. 0
    3. 1/2
    4. 1 (no reduction)
    Answer and solution

    Answer: A

    The factor is (1+cos2⁡2θ)/2. An unpolarised beam is two equal polarisations: the one perpendicular to the scattering plane scatters fully at any angle, while the one in the plane is weighted by cos2⁡2θ, zero at 90∘. So at 90∘ only half survives, and the scattered beam is completely polarised.

    Why people get this wrong: 0 applies to one polarisation only; the other is unaffected.

  15. MSQExam level

    Which changes increase the number of reflections (hkl) that can possibly be observed from a crystal (by turning it to any orientation)?
    1. Using X-rays of shorter wavelength.
    2. Studying a crystal of the same structure with a larger lattice constant.
    3. Using X-rays of longer wavelength.
    4. Replacing an fcc crystal of identical atoms by a simple cubic one of the same cube edge.
    Answer and solution

    Answer: A, B, D

    A reflection is possible only if λ=2dsin⁡θ≤2d, i.e. |G→|≤4π/λ (the "limiting sphere"). Shorter λ enlarges the limiting sphere; a larger lattice constant packs reciprocal-lattice points more densely. Both add reflections; longer λ removes them. The fcc structure factor removes every mixed-parity (hkl), which the simple cubic crystal keeps.

    Why people get this wrong: A larger cell means a denser reciprocal lattice, so more reflections fit, not fewer.

  16. NATExam level

    In a cubic crystal, the multiplicity of the powder line {210} (the number of distinct (hkl), counting (hkl) and (h‾k‾l‾) separately, that share the same d) is ______.
    Answer and solution

    Answer: 24

    The three different numbers 2,1,0 can be placed on the three axes in 3!=6 ways. The two nonzero ones can each be + or −: 4 choices. The zero has no sign. Total 6×4=24. For comparison {100} has 6, {110} 12, {111} 8 and {321} 48. Powder intensities are proportional to these numbers.

    Why people get this wrong: Treating 0 as having a sign gives 48; ignoring signs gives 6.

  17. NATHard

    A cubic powder gives its first two lines at θ=21.68∘ and θ=25.25∘ with λ=1.54 Å. Identify the structure from the lines and find the lattice constant, ______ Å (to two decimal places).
    Answer and solution

    Answer: 3.61 Å (±0.02)

    sin2⁡21.68∘=0.1365 and sin2⁡25.25∘=0.1820; ratio 1.333=4/3. The first two lines in the ratio 3:4 mean (111) and (200): fcc. (Simple cubic would give 1:2, bcc 2:4=1:2, diamond 3:8.) From (111): d=1.54/(2×0.3694)=2.084 Å and a=3d=3.61 Å.

    Why people get this wrong: Comparing the angles (21.68/25.25) instead of sin2⁡θ.

  18. MCQHard

    The first eight lines of a cubic powder pattern have sin2⁡θ in the ratio 1:2:3:4:5:6:7:8. The crystal is
    1. simple cubic
    2. body-centred cubic
    3. face-centred cubic
    4. diamond cubic
    Answer and solution

    Answer: B

    bcc allows h2+k2+l2=2,4,6,8,10,12,14,16, which is 1:2:…:8. Simple cubic would give 1,2,3,4,5,6,8,9: the value 7 cannot be a sum of three squares, so a ratio with 7 in it rules simple cubic out. fcc and diamond start 3:4 and 3:8.

    Why people get this wrong: The first six lines of simple cubic and bcc have the same ratios. Only the seventh line decides.

  19. NATHard

    In a rock-salt crystal take the form factors as fA=11 and fB=17 for both reflections (a crude approximation that ignores their fall with angle). The ratio of structure-factor intensities |F200|2/|F111|2 is ______ (to one decimal place).
    Answer and solution

    Answer: 21.8 (±0.2)

    Rock salt: F=4(fA+fB) when h,k,l are all even and 4(fA−fB) when all odd. |F200|2/|F111|2=(28/6)2=21.8. Real intensities also include multiplicity (6 for {200}, 8 for {111}) and angle factors.

    Why people get this wrong: Using fA+fB for both lines (ratio 1), or (28/6) without squaring.

  20. MSQHard

    Which statements are correct?
    1. In Bragg diffraction the X-ray photon gives part of its energy to the lattice.
    2. The Laue condition k→′−k→=G→ is equivalent to Bragg's law.
    3. A monochromatic beam on a fixed single crystal in a general orientation always gives several diffracted beams.
    4. The shortest reciprocal-lattice vector perpendicular to the (hkl) planes has length 2π/dhkl.
    Answer and solution

    Answer: B, D

    Energy loss: false: Bragg peaks are elastic (|k→′|=|k→|); inelastic scattering by phonons gives the weak diffuse background. Laue = Bragg: true: |G→|=2ksin⁡θ with |G→|=2πn/d gives 2dsin⁡θ=nλ. Always several beams: false: in general no reciprocal-lattice point lies exactly on the Ewald sphere, which is why one rotates the crystal, uses a powder, or uses white radiation. 2π/d: true.

    Why people get this wrong: Expecting diffraction from any crystal in any orientation: a monochromatic beam needs the right angle.

  21. NATHard

    Electrons accelerated from rest through a voltage V give a first-order Bragg reflection at θ=30∘ from planes 1.5 Å apart. V is ______ volts (to one decimal place). Ignore relativity.
    Answer and solution

    Answer: 66.8 V (±0.7)

    Bragg: λ=2dsin⁡θ=2×1.5×0.5=1.5 Å. Then V=h22meeλ2=(6.626×10−34)22×9.109×10−31×1.602×10−19×(1.5×10−10)2=66.8 V. (Check with λ≈12.26/V Å: (12.26/1.5)2=66.8.)

    Why people get this wrong: Using θ as the angle from the normal (cos⁡30∘) gives λ=2.6 Å and the wrong voltage.

  22. MCQHard

    A uniform lattice expansion of a cubic crystal makes the powder peaks
    1. shift to higher angle, all by the same amount
    2. shift to lower angle, all by the same amount
    3. shift to higher angle, the high-angle peaks more
    4. shift to lower angle, the high-angle peaks more
    Answer and solution

    Answer: D

    From Δθ=−tan⁡θ(Δd/d): a larger d means a smaller θ, and since tan⁡θ grows with θ, high-angle peaks move most. That is why precise lattice constants are taken from back-reflection peaks near θ=90∘.

    Why people get this wrong: Expecting a rigid shift of the whole pattern; the shift scales with tan⁡θ.

  23. MCQHard

    The seventh line of the powder pattern of a bcc metal (counting from the lowest angle) comes from the planes
    1. (400)
    2. (222)
    3. (310)
    4. (321)
    Answer and solution

    Answer: D

    bcc lines have h2+k2+l2=2,4,6,8,10,12,14,…: (110),(200),(211),(220),(310),(222),(321). The seventh, N=14, is (321). In simple cubic N=7 cannot occur, but in bcc N=14=9+4+1 is fine.

    Why people get this wrong: Counting to (400) by skipping N=14 as if it were forbidden.

  24. MSQHard

    For the diamond structure (identical atoms), which of these reflections are present?
    1. (111)
    2. (200)
    3. (220)
    4. (222)
    Answer and solution

    Answer: A, C

    Diamond: F=Ffcc[1+eiπ(h+k+l)/2]. (111): fcc-allowed, factor 1+e3iπ/2=1−i≠0: present. (200): 1+eiπ=0: absent. (220): 1+e2iπ=2: present. (222): 1+e3iπ=0: absent (it shows only very faintly in real Si because the bonding electrons are not spherical).

    Why people get this wrong: All even indices are not automatically present in diamond: they need h+k+l divisible by 4.

  25. NATHard

    A hexagonal crystal has a=3.0 Å and c=5.0 Å. Using 1d2=43⋅h2+hk+k2a2+l2c2, the spacing of the (101) planes is ______ Å (to two decimal places).
    Answer and solution

    Answer: 2.31 Å (±0.01)

    h2+hk+k2=1, so 1d2=43⋅19+125=0.1481+0.0400=0.1881 Å−2, and d=2.31 Å.

    Why people get this wrong: Dropping the factor 4/3, which comes from the 120∘ angle between the basal axes.

  26. MCQHard

    A crystal has a C-centred lattice (one atom per lattice point, extra points at the centres of the faces normal to c, i.e. at (12,12,0)). Its reflections (hkl) are systematically absent when
    1. h+k is odd
    2. h+k+l is odd
    3. h,k,l are mixed (not all odd or all even)
    4. l is odd
    Answer and solution

    Answer: A

    Basis at (0,0,0) and (12,12,0): F=f[1+eiπ(h+k)], which is 2f for h+k even and 0 for h+k odd, whatever l is. Body centring gives the h+k+l rule and face centring (all faces) the mixed-indices rule.

    Why people get this wrong: Applying the bcc rule; only the centring vector decides which index combination appears.

  27. MCQHard

    A single, flat, two-dimensional layer of atoms (a perfect monolayer, no stacking) is examined by diffraction. In reciprocal space, the condition for diffraction is set by
    1. isolated points, as for a 3D crystal
    2. cones about the normal to the layer
    3. rods running perpendicular to the layer through the 2D reciprocal-lattice points
    4. concentric spheres
    Answer and solution

    Answer: C

    Periodicity in the plane gives Laue conditions only for the two in-plane components of k→′−k→; there is no condition on the component normal to the layer. So each 2D reciprocal-lattice point extends into a line (a rod) along the normal. The Ewald sphere cuts every rod, so a monolayer diffracts at many angles; this is the basis of low-energy electron diffraction (LEED) from surfaces.

    Why people get this wrong: Expecting points; points need periodicity in all three directions.

  28. MCQHard

    Away from absorption edges (no anomalous scattering), the intensities of the reflections (hkl) and (h‾k‾l‾) of any crystal are
    1. equal only if the crystal has a centre of symmetry
    2. always equal
    3. equal only for cubic crystals
    4. in the ratio of their multiplicities
    Answer and solution

    Answer: B

    With real form factors fj, Fh‾k‾l‾=∑fje−2πi(hxj+kyj+lzj)=Fhkl∗, so |Fh‾k‾l‾|2=|Fhkl|2 whether or not the crystal is centrosymmetric (Friedel's law). Near an absorption edge f gains an imaginary part and the law breaks, which is used to find absolute structures.

    Why people get this wrong: Requiring a centre of symmetry; ordinary diffraction cannot tell a crystal from its inverted image.

  29. MSQHard

    Which statements are correct?
    1. The Laue method uses monochromatic X-rays and a crystal turned through many angles.
    2. The reciprocal lattice of a simple cubic lattice of edge a is simple cubic with edge 2π/a.
    3. The reciprocal-lattice vector G→hkl has length 2π/dhkl and is normal to the (hkl) planes.
    4. The rotating-crystal method uses monochromatic X-rays.
    Answer and solution

    Answer: B, C, D

    B and C follow from a→i⋅b→j=2πδij. D: in rotating-crystal and powder methods λ is fixed and the angle varies. A is false: the Laue method keeps the crystal fixed and uses white (continuous) X-rays, so each plane picks its own wavelength.

    Why people get this wrong: Swapping the Laue and rotating-crystal methods.

  30. MSQHard

    Which statements about the widths and heights of diffraction peaks are correct?
    1. For very small crystallites of size L, the peak width (in 2θ) grows roughly as λ/(Lcos⁡θ).
    2. Peak broadening from non-uniform strain grows roughly as tan⁡θ.
    3. The width of a peak does not depend on the size of the crystal.
    4. For a crystal of N identical planes, the intensity at the peak grows as N2.
    Answer and solution

    Answer: A, B, D

    A is the Scherrer relation. B: a spread Δd/d gives Δθ=−tan⁡θΔd/d from differentiating Bragg's law. D: at the peak all N amplitudes add in phase, so intensity ∝N2, while the width falls as 1/N, keeping the integrated intensity ∝N. C is false, as A shows; only for large crystals is the size effect negligible.

    Why people get this wrong: Thinking peak height grows only as N; that is the area, not the height.

← All topics · Timed mock test →