Home / Courses / GATE Physics / Practice / Vector algebra: dot, cross and triple products

Vector algebra: dot, cross and triple products

Mathematical methods · 18 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQExam level

    With the summation convention (repeated indices summed over 1, 2, 3), which statements are true?
    1. ϵijkϵijk=6
    2. ϵijkδij=0
    3. ϵ123=−ϵ213
    4. ϵijkϵimn=δjmδkn+δjnδkm
    Answer and solution

    Answer: A, B, C

    Of the 27 index combinations, 6 are permutations of 123 with ϵ=±1, so ∑ϵijk2=6. δij sets i=j, and ϵ vanishes when two indices are equal: 0. Swapping two indices flips the sign: ϵ213=−1. The contraction identity has a minus sign: ϵijkϵimn=δjmδkn−δjnδkm; it is the index form of BAC-CAB.

    Why people get this wrong: Remembering the ϵϵ identity with a plus sign; test it with j=k, where the left side must vanish.

  2. MCQExam level

    For non-coplanar a→, b→, c→, the reciprocal vector is defined as a→∗=b→×c→a→⋅(b→×c→). Which is true?
    1. a→∗⋅a→=0 and a→∗⋅b→=1
    2. a→∗ is parallel to a→
    3. a→∗⋅a→=1 and a→∗⋅b→=a→∗⋅c→=0
    4. |a→∗|=1/|a→| always
    Answer and solution

    Answer: C

    a→∗⋅a→=a→⋅(b→×c→)a→⋅(b→×c→)=1. And b→×c→ is perpendicular to both b→ and c→, so a→∗⋅b→=a→∗⋅c→=0. In general a→∗ is not along a→, and |a→∗|=1/|a→| only when a→ is perpendicular to b→ and c→. These are the reciprocal lattice vectors of crystallography (up to 2π).

    Why people get this wrong: Thinking the reciprocal vector points along the original one; that is only true for orthogonal axes.

  3. MSQExam level

    The coordinate axes are rotated about the z-axis by an angle α. Which statements are true?
    1. The components of a vector change.
    2. The magnitude of every vector is unchanged.
    3. The dot product of two vectors is unchanged.
    4. The cross product of two vectors stops being perpendicular to them.
    Answer and solution

    Answer: A, B, C

    A rotation changes the components (by an orthogonal matrix), but lengths and angles, and so dot products, are invariant. The cross product of two vectors transforms as a vector under rotations and stays perpendicular to both.

    Why people get this wrong: Confusing a change of description (new components) with a change of the vector itself.

  4. MCQExam level

    With the summation convention, εijkεimnAjBkAmBn equals
    1. 0
    2. (A→⋅B→)2
    3. |A→|2|B→|2+(A→⋅B→)2
    4. |A→|2|B→|2−(A→⋅B→)2
    Answer and solution

    Answer: D

    εijkAjBk=(A→×B→)i and εimnAmBn is the same, so the expression is |A→×B→|2. With εijkεimn=δjmδkn−δjnδkm it becomes AjAjBkBk−AjBjAkBk=|A→|2|B→|2−(A→⋅B→)2 (Lagrange's identity).

    Why people get this wrong: Sign of the second delta product: δjnδkm comes with a minus.

  5. MCQHard

    The expression (A→×B→)⋅(C→×D→) equals
    1. (A→⋅D→)(B→⋅C→)−(A→⋅C→)(B→⋅D→)
    2. (A→⋅C→)(B→⋅D→)−(A→⋅D→)(B→⋅C→)
    3. (A→⋅B→)(C→⋅D→)−(A→⋅C→)(B→⋅D→)
    4. (A→⋅C→)(B→⋅D→)+(A→⋅D→)(B→⋅C→)
    Answer and solution

    Answer: B

    Write it as A→⋅[B→×(C→×D→)] (swap dot and cross in the triple product) and use BAC-CAB: B→×(C→×D→)=C→(B→⋅D→)−D→(B→⋅C→). Dotting with A→ gives (A→⋅C→)(B→⋅D→)−(A→⋅D→)(B→⋅C→). With C→=A→, D→=B→ it reduces to Lagrange's identity |A→×B→|2=A2B2−(A→⋅B→)2.

    Why people get this wrong: Getting the overall sign backwards; the Lagrange identity check fixes it.

  6. MSQHard

    Under a parity inversion (r→→−r→), which statements are true?
    1. Angular momentum L→=r→×p→ is an axial (pseudo) vector.
    2. The magnetic field B→ is an axial vector.
    3. The electric field E→ is an axial vector.
    4. A→⋅(B→×C→) of three polar vectors is a pseudoscalar.
    Answer and solution

    Answer: A, B, D

    Polar vectors (r→, p→, E→, F→) flip sign under inversion. The cross product of two polar vectors does not flip: (−r→)×(−p→)=r→×p→. That makes L→ axial, and B→ too (it appears in F→=qv→×B→ with polar F→ and v→). E→ is polar (F→=qE→). The triple product of three polar vectors changes sign: a pseudoscalar.

    Why people get this wrong: Thinking a vector is axial because it is drawn going round in a circle; the test is how it behaves under inversion.

  7. MCQHard

    Given non-zero a→ and b→ with a→⋅b→=0, every solution of x→×a→=b→ is (with λ any real number)
    1. x→=b→×a→a2+λa→
    2. x→=a→×b→a2+λb→
    3. x→=b→a+λa→
    4. x→=a→×b→a2+λa→
    Answer and solution

    Answer: D

    Check: (a→×b→)×a→a2=−a→×(a→×b→)a2=−[a→(a→⋅b→)−b→a2]a2=b→, using a→⋅b→=0. Adding any multiple of a→ changes nothing, since a→×a→=0. The condition a→⋅b→=0 is needed because x→×a→ is always perpendicular to a→.

    Why people get this wrong: The order b→×a→ gives −b→; and the free part must be along a→, not b→.

  8. NATHard

    For a→=(2,0,0), b→=(1,1,0) and c→=(0,0,3), the reciprocal vector a→∗=b→×c→a→⋅(b→×c→) has magnitude ______ (to three decimal places).
    Answer and solution

    Answer: 0.707 (±0.002)

    b→×c→=(1⋅3−0, 0−1⋅3, 0)=(3,−3,0), and a→⋅(b→×c→)=6. So a→∗=(0.5,−0.5,0), of magnitude 0.707. Check: a→∗⋅a→=1, a→∗⋅b→=0. It is not 1/|a→|=0.5, because a→ is not perpendicular to b→.

    Why people get this wrong: Assuming |a→∗|=1/|a→| as for orthogonal axes.

  9. MCQHard

    If [a→ b→ c→]=3, then [a→×b→  b→×c→  c→×a→] equals
    1. 3
    2. 9
    3. 27
    4. 6
    Answer and solution

    Answer: B

    Use (b→×c→)×(c→×a→)=c→[b→c→a→]−a→[b→c→c→]=c→[a→b→c→]. Then (a→×b→)⋅c→[a→b→c→]=[a→b→c→]2=9. (In matrix language: the cofactor matrix has determinant det2⁡ in three dimensions.)

    Why people get this wrong: Guessing det3⁡=27 by counting three cross products.

  10. MCQHard

    The unit vector iˆ is rotated by 120∘ about the axis nˆ=(iˆ+jˆ+kˆ)/3 (right-hand rule). The result is
    1. kˆ
    2. jˆ
    3. −iˆ
    4. (iˆ+jˆ)/2
    Answer and solution

    Answer: B

    Rodrigues' formula: v→′=v→cos⁡α+(nˆ×v→)sin⁡α+nˆ(nˆ⋅v→)(1−cos⁡α). With v→=iˆ, cos⁡α=−12, sin⁡α=32: nˆ×iˆ=(0,1,−1)/3, nˆ(nˆ⋅iˆ)=(1,1,1)/3. So v→′=(−12,0,0)+(0,12,−12)+(12,12,12)=(0,1,0)=jˆ. Geometrically, a 120∘ turn about the body diagonal cycles x→y→z→x.

    Why people get this wrong: kˆ is the result of the −120∘ turn (or the left-hand rule).

  11. MSQHard

    Non-zero vectors satisfy a→+b→+c→=0→. Which statements must be true?
    1. a→×b→=b→×c→=c→×a→
    2. a→×b→+b→×c→+c→×a→=0→
    3. a→⋅b→+b→⋅c→+c→⋅a→=−12(a2+b2+c2)
    4. a→⋅(b→×c→)=0
    Answer and solution

    Answer: A, C, D

    Cross a→+b→+c→=0→ with b→: a→×b→+c→×b→=0→, so a→×b→=b→×c→; crossing with c→ gives b→×c→=c→×a→. Hence the sum of the three cross products is 3a→×b→, which is zero only if a→∥b→, not in general. Squaring the sum: 0=a2+b2+c2+2(a→⋅b→+b→⋅c→+c→⋅a→), which gives the third statement. Since c→=−a→−b→ lies in the plane of a→ and b→, the triple product is zero.

    Why people get this wrong: The three cross products are equal, so they add to three times one of them, not to zero.

  12. MSQHard

    A tetrahedron has vertices O at the origin, A=(a,0,0), B=(0,b,0) and C=(0,0,c) with a,b,c>0. Let S→1,…,S→4 be the outward area vectors of its faces (S→4 for face ABC). Which statements are true?
    1. S→1+S→2+S→3+S→4=0→
    2. |S→4|2=|S→1|2+|S→2|2+|S→3|2
    3. |S→4|=|S→1|+|S→2|+|S→3|
    4. S→4=12(bc,ca,ab)
    Answer and solution

    Answer: A, B, D

    S→4=12AB→×AC→=12(−a,b,0)×(−a,0,c)=12(bc,ca,ab), pointing away from O. The three right-angle faces have outward vectors −12bciˆ, −12cajˆ, −12abkˆ, so the four add to zero (true for any closed surface: ∮dS→=0→). Because the first three are mutually perpendicular, |S→4|2 is the sum of their squares, a 3D Pythagoras. A plain sum of the areas is too large (the triangle inequality is strict here).

    Why people get this wrong: Areas add like perpendicular vectors here, so squares add, not the areas themselves.

  13. NATTop rank

    Three unit vectors make an angle of 60∘ with each other in pairs. The volume of the parallelepiped they span is ______ (to three decimal places).
    Answer and solution

    Answer: 0.707 (±0.002)

    The square of the triple product is the Gram determinant of the dot products: [a→b→c→]2=|11/21/21/211/21/21/21|=1(1−14)−12(12−14)+12(14−12)=34−18−18=12. Volume =1/2=0.707. (These are three edges of a regular tetrahedron from one corner, whose volume is 16 of this: 2/12.)

    Why people get this wrong: Taking the volume as sin2⁡60∘ or sin3⁡60∘: there is no simple product rule for non-perpendicular edges.

  14. MCQTop rank

    For any vectors, A→×(B→×C→)+B→×(C→×A→)+C→×(A→×B→) equals
    1. A→×B→+B→×C→+C→×A→
    2. 0→
    3. 2A→×(B→×C→)
    4. (A→⋅B→)C→+(B→⋅C→)A→+(C→⋅A→)B→
    Answer and solution

    Answer: B

    Expand each with BAC-CAB: B→(A→⋅C→)−C→(A→⋅B→)+C→(B→⋅A→)−A→(B→⋅C→)+A→(C→⋅B→)−B→(C→⋅A→). Every term cancels with another: the sum is 0→. This is the Jacobi identity; the same structure appears in commutators of angular momentum operators.

    Why people get this wrong: Expecting the three terms to add up because they look alike; they cancel in pairs.

  15. MSQTop rank

    A rigid body spins with angular velocity ω→ about an axis through the origin, so a point at r→ has velocity v→=ω→×r→. Which statements are true?
    1. v→ is perpendicular to ω→ at every point.
    2. The field v→(r→) has zero divergence.
    3. The kinetic energy of a point mass m is 12m[ω2r2−(ω→⋅r→)2].
    4. |v→|=ωr at every point.
    Answer and solution

    Answer: A, B, C

    A cross product is perpendicular to both factors. ∇⋅(ω→×r→)=r→⋅(∇×ω→)−ω→⋅(∇×r→)=0, since ω→ is constant and ∇×r→=0. By Lagrange's identity |ω→×r→|2=ω2r2−(ω→⋅r→)2. The speed is ωrsin⁡θ, the distance from the axis times ω, not ωr unless r→⟂ω→.

    Why people get this wrong: Using the distance from the origin instead of the distance from the axis.

  16. NATTop rank

    A hexagonal cell has a→=(1,0,0), b→=(12,32,0) and c→=(0,0,2). The reciprocal vector a→∗=b→×c→a→⋅(b→×c→) has length ______ (three decimal places).
    Answer and solution

    Answer: 1.155 (±0.002)

    b→×c→=(32⋅2−0, 0−12⋅2, 0)=(3,−1,0), length 2. Volume a→⋅(b→×c→)=3. So |a→∗|=23≈1.155. Note it is longer than 1/|a→|=1 because a→∗ is perpendicular to b→, not parallel to a→.

    Why people get this wrong: Assuming |a→∗|=1/|a→|, true only when a→ is perpendicular to both b→ and c→.

  17. MCQTop rank

    For any four vectors, (A→×B→)×(C→×D→) equals
    1. D→[A→⋅(B→×C→)]−C→[A→⋅(B→×D→)]
    2. A→[B→⋅(C→×D→)]−B→[A→⋅(C→×D→)]
    3. C→[A→⋅(B→×D→)]−D→[A→⋅(B→×C→)]
    4. C→[A→⋅(B→×C→)]−D→[A→⋅(B→×D→)]
    Answer and solution

    Answer: C

    Call E→=A→×B→. Then E→×(C→×D→)=C→(E→⋅D→)−D→(E→⋅C→) (BAC-CAB). And E→⋅D→=(A→×B→)⋅D→=A→⋅(B→×D→), E→⋅C→=A→⋅(B→×C→). So the result is C→[A→⋅(B→×D→)]−D→[A→⋅(B→×C→)]. (Expanding the other way gives the equally valid B→[A→⋅(C→×D→)]−A→[B→⋅(C→×D→)]; the second option has that sign reversed.)

    Why people get this wrong: The result lies both in the plane of C→,D→ and in the plane of A→,B→; either expansion is fine but the signs must match BAC-CAB.

  18. NATTop rank

    The vector x→ satisfies x→+a→×x→=b→ with a→=(0,0,2) and b→=(1,0,1). The value of |x→|2 is ______.
    Answer and solution

    Answer: 1.2 (±0.01)

    Write x→=(x1,x2,x3); then a→×x→=(−2x2, 2x1, 0). The three components give x1−2x2=1, x2+2x1=0, x3=1. From the second, x2=−2x1, so 5x1=1: x→=(0.2,−0.4,1) and |x→|2=0.04+0.16+1=1.2. Check with the general solution x→=b→−a→×b→+(a→⋅b→)a→1+a2=(1,0,1)−(0,2,0)+(0,0,4)5, the same vector.

    Why people get this wrong: Treating a→×x→ as a scalar multiple of x→; it mixes the components.

← All topics · Timed mock test →