Sound, beats and the Doppler effect
Oscillations, waves and optics · 8 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MSQExam level
Which statements about the Doppler effect for light in vacuum are correct?- Light from a source moving exactly at right angles to the line of sight shows no shift at all.
- For a source receding at speed , .
- For the fractional shift is about for recession.
- The shift depends only on the relative velocity of source and observer.
Answer and solution
Answer: B, C, D
Light needs no medium, so only the relative velocity matters. The longitudinal formula is . Even at right angles there is a shift, in the observer's frame, from time dilation (the transverse Doppler effect).Why people get this wrong: Carrying over the classical result "no shift at right angles" ignores time dilation.
-
NATExam level
A medical ultrasound probe sends 5.0 MHz waves into tissue (speed 1540 m/s) and receives the echo from blood moving at 0.30 m/s, the beam making with the flow (blood moving towards the probe). The frequency shift of the echo is ______ Hz (to the nearest hertz).Answer and solution
Answer: 1687 Hz (±5)
The blood is first a moving receiver, then a moving source, so the shift doubles: Hz, an audible tone, which is how Doppler ultrasound lets you "hear" blood flow. (Since , the exact expression differs only in the fourth significant figure.)Why people get this wrong: Forgetting the factor 2 for the reflection halves the shift.
-
MSQHard
A Doppler ultrasound probe at rest measures echoes from blood moving at speed (much less than the sound speed ), the beam making angle with the flow. Which statements are correct?- The frequency shift is proportional to
- There are two Doppler steps (the blood receives, then re-sends), which double the shift
- No shift is measured when the beam is perpendicular to the flow
- At a fixed flow speed, a higher transmitted frequency gives a smaller shift
Answer and solution
Answer: A, B, C
. Only the velocity component along the beam counts (hence , and zero at ). The moving blood first hears a shifted frequency, then re-emits it as a moving source, so the shift appears twice. The shift is proportional to , so higher frequencies give larger shifts, not smaller.Why people get this wrong: The shift is a fraction of the frequency; it grows with .
-
NATHard
Sound meets a flat water surface at normal incidence from the air. Take acoustic impedances kg m⁻² s⁻¹ and kg m⁻² s⁻¹. The percentage of the incident intensity transmitted into the water is ______ % (to three decimal places).Answer and solution
Answer: 0.112 % (±0.002)
The intensity transmission coefficient is , that is 0.112% (a drop of about 29.5 dB). Nearly all the sound is reflected.Why people get this wrong: is not the transmitted fraction; the formula has the factor 4 and the sum squared.
-
NATTop rank
A stationary speaker emits Hz towards a car driving straight at it. A microphone beside the speaker picks up the emitted sound and the sound reflected from the car together, and records beats per second. With m/s, the car's speed is ______ m/s.Answer and solution
Answer: 20 m/s (±0.05)
The reflected frequency is , so the beat frequency is . Then , giving m/s.Why people get this wrong: Using the low-speed shortcut gives m/s; the exact form has .
-
NATTop rank
A Hz source moves at m/s away from a listener at rest and straight towards a large wall. The listener hears the direct sound and the echo from the wall ( m/s). The beat frequency is ______ Hz (to two decimal places).Answer and solution
Answer: 8 Hz (±0.02)
Direct (source receding): Hz. The wall receives the source approaching: Hz, and reflects it unchanged (wall and listener are at rest). Beats: Hz ().Why people get this wrong: Applying a second Doppler step on reflection: the wall and listener are both at rest, so there is none.
-
MCQTop rank
A jet flies at Mach 2 straight towards a distant listener, along the line joining them, while its engine noise varies continually. Which describes what the listener hears?- The sounds in the order they were made, at a raised pitch
- Nothing until the jet has passed, then the sounds in the order they were made, at a lowered pitch
- The jet arrives before its sound; then the sounds made during the approach arrive in reverse order, the latest first
- All the sounds at once, for ever
Answer and solution
Answer: C
Sound emitted at time , when the jet is away, arrives at . With the bracket is : later emissions arrive earlier. The jet itself reaches the listener at , the same moment as the sound emitted just as it arrives (the boom); the earlier noise follows, played backwards. The Doppler factor says the same: reversed in time, unchanged in pitch at Mach 2.Why people get this wrong: A negative Doppler factor means time-reversed sound, not "no sound".