Home / Courses / GATE Physics / Practice / Semiconductors and the Fermi level

Semiconductors and the Fermi level

Solid state physics and devices · 43 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Perfectly pure silicon at absolute zero temperature is
    1. a good conductor, because silicon has four valence electrons
    2. an insulator
    3. a superconductor
    4. n-type, because electrons are lighter than holes
    Answer and solution

    Answer: B

    At 0 K every valence-band state is full and every conduction-band state is empty; with a gap of about 1.17 eV and no thermal energy, no electron can be excited. A full band carries no current, so the crystal insulates. Conduction appears only when temperature, light or impurities supply carriers.

    Why people get this wrong: A semiconductor is not "half a conductor" at all temperatures: its conductivity comes entirely from excited or added carriers.

  2. NATStandard

    Electrons in a semiconductor have mobility 1400 cm2/V s and conductivity effective mass 0.26me. Their mean time between scattering events is ______ ps (to three decimal places).
    Answer and solution

    Answer: 0.207 ps (±0.003)

    From the Drude picture μ=eτ/m∗, so τ=μm∗e=(0.140 m2/V s)(0.26×9.11×10−31 kg)1.60×10−19 C=2.07×10−13 s =0.207 ps.

    Why people get this wrong: Leaving the mobility in cm2/V s gives an answer 104 times too big; use 1 cm2=10−4 m2.

  3. MCQStandard

    In a non-degenerate n-type semiconductor at 300 K, the donor density (all ionised, much larger than ni) is multiplied by 10. The Fermi level
    1. moves down by about 60 meV
    2. moves up by about 26 meV
    3. moves up by about 0.6 eV
    4. moves up by about 60 meV
    Answer and solution

    Answer: D

    n=Nce−(Ec−EF)/kT≈Nd, so Ec−EF=kTln⁡(Nc/Nd). Multiplying Nd by 10 lowers Ec−EF by kTln⁡10=0.02585×2.303=0.0595 eV: the Fermi level rises about 60 meV towards the conduction band.

    Why people get this wrong: Using kT itself (26 meV): a factor e, not 10, moves it by kT.

  4. NATExam level

    For silicon (Eg=1.12 eV, taken constant) with ni∝T3/2e−Eg/2kT, the ratio ni(310 K)/ni(300 K) is ______ (to two decimal places). Take k=8.617×10−5 eV/K.
    Answer and solution

    Answer: 2.11 (±0.02)

    ni(310)ni(300)=(310300)3/2exp⁡[Eg2k(1300−1310)]. Eg2k=6499 K and 1300−1310=1.075×10−4 K−1, so the exponential is e0.699=2.01; times 1.050 gives 2.11. A 10 K rise doubles ni, the reason electronics drift with temperature.

    Why people get this wrong: Dropping the factor 2 in Eg/2kT gives a ratio of about 4.2.

  5. MCQExam level

    In an intrinsic semiconductor where the hole effective mass is larger than the electron effective mass, the Fermi level at T>0
    1. lies exactly at mid-gap at all temperatures
    2. lies slightly above mid-gap and moves up as T rises
    3. lies slightly below mid-gap and moves down as T rises
    4. lies at the valence band edge
    Answer and solution

    Answer: B

    Ei=Ec+Ev2+34kTln⁡mh∗me∗. With mh∗>me∗ the log is positive: Ei is above mid-gap, by an amount proportional to T. Heavier holes mean more valence states near the edge, so the Fermi level must move away from them to keep n=p.

    Why people get this wrong: Guessing the shift is towards the band with the heavier carriers; it is away from it.

  6. MSQExam level

    For an n-type semiconductor with donor density Nd, ln⁡n is plotted against 1/T. Which statements are correct?
    1. At very low temperature (freeze-out), n rises with T as donors ionise.
    2. In a middle range, n≈Nd and hardly changes with T.
    3. At high temperature the material is intrinsic and the slope of ln⁡n against 1/T is −Eg/2k.
    4. The slope in the freeze-out region gives the band gap.
    Answer and solution

    Answer: A, B, C

    Freeze-out: true: electrons are still bound to donors and kT is too small to free them all. Saturation: true: all donors are ionised and ni≪Nd (the useful range for devices). Intrinsic: true: n≈ni∝e−Eg/2kT. Freeze-out slope: false. It gives the donor ionisation energy (−Ed/2k for low compensation), a few tens of meV, not the gap.

    Why people get this wrong: Reading every straight segment of an Arrhenius plot as the band gap.

  7. NATExam level

    In a semiconductor with relative permittivity 12 and electron effective mass 0.20me, the hydrogen-like model gives a donor ionisation energy of ______ meV (to one decimal place). Take the hydrogen ground-state energy as 13.6 eV.
    Answer and solution

    Answer: 18.9 meV (±0.2)

    The extra electron orbits the donor ion like hydrogen, but in a medium of permittivity εr with mass m∗: Ed=13.6 eV×m∗/meεr2=13.6×0.20144=0.0189 eV =18.9 meV, below kT at room temperature, so donors are ionised.

    Why people get this wrong: Dividing by εr instead of εr2 (the energy goes as e4/ε2).

  8. MCQExam level

    Near a band edge E(k) is a parabola. Compared with a band of small curvature d2E/dk2, a band of large curvature has electrons with
    1. a larger effective mass
    2. the same effective mass, since it is a property of the electron
    3. a negative effective mass
    4. a smaller effective mass
    Answer and solution

    Answer: D

    m∗=ℏ2d2E/dk2. A sharply curved band (energy rising fast with k) gives a small m∗, so the electrons respond quickly to a field and have high mobility. A flat band means heavy carriers.

    Why people get this wrong: Confusing curvature with the slope: the slope dE/dk gives the group velocity, the curvature gives the mass.

  9. MSQExam level

    Which statements about the Fermi-Dirac function f(E) are correct?
    1. f(EF+Δ)+f(EF−Δ)=1 for any Δ.
    2. At T=0 it is a step: 1 below EF and 0 above.
    3. For E−EF≫kT it is close to e−(E−EF)/kT.
    4. At higher temperature the step is smeared over a few kT on each side of EF.
    Answer and solution

    Answer: A, B, C, D

    Symmetry: 1ex+1+1e−x+1=1ex+1+ex1+ex=1: the chance of a state Δ above being full equals the chance of a state Δ below being empty. Step at T=0: true. Boltzmann tail: true, since ex≫1. Smearing: true: f changes from 0.9 to 0.1 over about 4.4kT. All four hold.

    Why people get this wrong: Students often hunt for a false statement. Sometimes there is none.

  10. MCQExam level

    Minority holes in an n-type sample have diffusion coefficient 10 cm2/s and lifetime 1 μs. Their diffusion length is about
    1. 32 μm
    2. 10 μm
    3. 3.2 μm
    4. 100 μm
    Answer and solution

    Answer: A

    L=Dτ=10×10−6 cm =10−5 cm =3.16×10−3 cm =31.6 μm: the average distance a hole diffuses before it recombines.

    Why people get this wrong: Using L=Dτ instead of its square root.

  11. MSQExam level

    A rectangular bar carries current along x in a magnetic field along z, and the Hall voltage is measured across its width y. Which statements are correct?
    1. The sign of the Hall voltage tells whether electrons or holes dominate.
    2. Intrinsic silicon has a negative Hall coefficient, because electrons are more mobile than holes.
    3. For fixed current and field, the Hall voltage is inversely proportional to the thickness along z.
    4. A more heavily doped sample gives a larger Hall voltage at the same current.
    Answer and solution

    Answer: A, B, C

    Sign: true: both carrier types are pushed to the same side, so the charge that piles up there sets the sign. Intrinsic Si: true. With n=p, RH=pμp2−nμn2e(nμn+pμp)2<0 since μn>μp. 1/t: true: VH=IBnqt. Heavier doping: false: larger n makes VH smaller. That is why Hall sensors use lightly doped semiconductors, not metals.

    Why people get this wrong: Expecting more carriers to give a bigger signal: the same current is then carried by slower carriers, which feel a smaller force.

  12. NATExam level

    Electrons in silicon at 300 K have conductivity mass 0.26me and low-field mobility 1400 cm2/V s. Taking their thermal speed as 3kBT/m∗, the electric field at which the (low-field) drift speed would reach 10% of the thermal speed is ______ kV/cm (to two decimal places).
    Answer and solution

    Answer: 1.64 kV/cm (±0.02)

    vth=3(1.381×10−23)(300)0.26×9.11×10−31=2.29×105 m/s. Drift speed vd=μE, so E=0.1vthμ=2.29×1040.140=1.64×105 V/m =1.64 kV/cm. Beyond fields of this order the simple vd=μE fails and the drift speed saturates near 105 m/s.

    Why people get this wrong: Converting V/m to kV/cm: 1 kV/cm =105 V/m, not 103.

  13. MSQExam level

    Which statements about the Hall effect in semiconductors are correct?
    1. An intrinsic semiconductor whose electrons are more mobile than its holes has a negative Hall coefficient.
    2. A p-type sample can show a Hall coefficient that changes sign as it is heated into the intrinsic range.
    3. At the same current and field, a thicker sample (along B→) gives a larger Hall voltage.
    4. For a single carrier type, |RH|σ gives the carrier mobility.
    Answer and solution

    Answer: A, B, D

    With both carriers RH=pμp2−nμn2e(pμp+nμn)2. Intrinsic (n=p) with μn>μp gives RH<0. In a p-type sample RH>0 at first, but once heating makes n≈p the more mobile electrons win and RH turns negative. The Hall voltage is VH=IBnet, smaller for a thicker sample t. For one carrier, RH=1/ne and σ=neμ, so |RH|σ=μ (the Hall mobility).

    Why people get this wrong: Assuming the sign of RH is fixed by the doping: it is set by pμp2−nμn2, which temperature can flip.

  14. MCQExam level

    As the temperature of silicon rises from near 0 K to 300 K, its band gap
    1. decreases slightly, from about 1.17 eV to 1.12 eV
    2. stays exactly constant, since it is a property of the crystal
    3. increases from 1.12 eV to about 1.4 eV
    4. falls to zero, which is why the conductivity rises
    Answer and solution

    Answer: A

    Thermal expansion and electron-phonon interaction shift the band edges so that the gap shrinks a little with temperature (an empirical fit is the Varshni formula). For silicon the change from 0 to 300 K is only about 0.05 eV. The large rise in intrinsic conductivity comes from the factor e−Eg/2kT, not from the small change in Eg.

    Why people get this wrong: Blaming the conductivity rise on a closing gap: the Boltzmann factor does almost all the work.

  15. NATHard

    A semiconductor is doped with donors at exactly twice its intrinsic density, Nd=2ni, all ionised. The electron density is ______ times ni (to three decimal places).
    Answer and solution

    Answer: 2.414 (±0.003)

    Neutrality n=p+Nd with p=ni2/n gives n2−Ndn−ni2=0, so n=Nd2+Nd24+ni2. With Nd=2ni: n=ni+2ni=2.414ni, and p=ni/2.414=0.414ni. Check: n−p=2ni=Nd.

    Why people get this wrong: Taking n=Nd is good only when Nd≫ni. Here the thermally generated pairs add a lot.

  16. MCQHard

    n-type silicon with Nd=1016 cm−3 has Nc=2.8×1019 cm−3. At 300 K (kT=0.02585 eV) the Fermi level lies below the conduction band edge by about
    1. 0.21 eV
    2. 0.09 eV
    3. 0.35 eV
    4. 0.56 eV
    Answer and solution

    Answer: A

    n=Nce−(Ec−EF)/kT gives Ec−EF=kTln⁡(Nc/n)=0.02585ln⁡(2800)=0.02585×7.94=0.205 eV.

    Why people get this wrong: 0.09 eV comes from using log10⁡; 0.56 eV is mid-gap, the intrinsic position.

  17. NATHard

    The resistance of an intrinsic semiconductor sample falls from 100 Ω at 300 K to 20 Ω at 350 K. Assuming σ∝e−Eg/2kT (ignore the slow change of mobility and the T3/2 factor), the band gap is ______ eV (to two decimal places). Take k=8.617×10−5 eV/K.
    Answer and solution

    Answer: 0.58 eV (±0.01)

    R1R2=σ2σ1=exp⁡[Eg2k(1T1−1T2)]. So Eg=2kln⁡(R1/R2)1/T1−1/T2=2×8.617×10−5×ln⁡51/300−1/350=2.774×10−44.762×10−4=0.58 eV.

    Why people get this wrong: Forgetting the 2 in 2kT gives half the gap (0.29 eV).

  18. MSQHard

    Which statements about optical transitions across the band gap are correct?
    1. In an indirect-gap semiconductor, absorption at the gap energy needs a phonon to supply momentum.
    2. Silicon has an indirect gap.
    3. GaAs LEDs are efficient because GaAs has a direct gap.
    4. A visible photon's momentum is comparable to the width of the Brillouin zone.
    Answer and solution

    Answer: A, B, C

    Phonon: true: the conduction band minimum is at a different k from the valence band maximum. Si indirect: true (minimum near the X point). GaAs direct: true. Photon momentum: false. A photon with λ=500 nm has k=2π/λ≈107 m−1, while the zone edge is at π/a≈1010 m−1: about a thousand times smaller. Optical transitions are vertical in a band diagram.

    Why people get this wrong: Thinking the photon can supply the momentum for an indirect transition. It carries almost none.

  19. MCQHard

    As the temperature of an n-type semiconductor is raised from room temperature towards very high values, its Fermi level
    1. moves closer to the conduction band
    2. moves towards the middle of the gap
    3. stays fixed, because Nd does not change
    4. moves into the valence band
    Answer and solution

    Answer: B

    As T rises, ni grows and eventually exceeds Nd. The material then behaves as intrinsic, with EF near mid-gap. Even before that, Ec−EF=kTln⁡(Nc/Nd) grows with T (Nc∝T3/2 too), pushing EF down towards the middle.

    Why people get this wrong: Expecting more thermal energy to lift the Fermi level. More heat makes a doped sample more intrinsic.

  20. NATHard

    An n-type sample has Hall coefficient of magnitude 3.6×10−4 m3/C and conductivity 250 S/m. The Hall mobility of the electrons is ______ cm2/V s.
    Answer and solution

    Answer: 900 cm²/V s (±5)

    μ=|RH|σ, because σ=neμ and |RH|=1/(ne). So μ=3.6×10−4×250=0.090 m2/V s =900 cm2/V s (1 m2 =104 cm2).

    Why people get this wrong: Dividing σ by RH, or forgetting the 104 in the unit change.

  21. MCQHard

    A steady light creates extra electron-hole pairs in an n-type sample; at t=0 the light is switched off. With minority lifetime τ, the excess hole density then
    1. falls linearly to zero at t=τ
    2. stays constant until the sample cools
    3. decays as e−t/τ
    4. decays as 1/(1+t/τ), like two-body recombination
    Answer and solution

    Answer: C

    In n-type material each excess hole recombines with one of the many electrons, whose number hardly changes. The recombination rate is Δp/τ, so dΔpdt=−Δpτ, giving exponential decay. The 1/(1+t/τ) form belongs to strong injection, where Δn≈Δp dominates both carriers.

    Why people get this wrong: Reading the lifetime as the time at which all carriers have gone: after τ, 37% remain.

  22. NATHard

    The effective density of states of a band with effective mass m∗=me at 300 K is Nc=2(2πm∗kTh2)3/2. Its value is ______ ×1019 cm−3 (to two decimal places).
    Answer and solution

    Answer: 2.51 ×10¹⁹ cm⁻³ (±0.02)

    2πmekTh2=2π×9.109×10−31×1.381×10−23×300(6.626×10−34)2=5.40×1016 m−2. Raised to the power 3/2: 1.255×1025 m−3; times 2 (spin): 2.51×1025 m−3 =2.51×1019 cm−3. For another mass multiply by (m∗/me)3/2.

    Why people get this wrong: Forgetting the factor 2 for the two spin states, or the 106 between m−3 and cm−3.

  23. MCQHard

    In a doped semiconductor, carrier mobility limited by lattice (phonon) scattering and by ionised-impurity scattering depends on temperature roughly as
    1. T−3/2 for both
    2. T3/2 for lattice, T−3/2 for impurity
    3. T−3/2 for lattice, T3/2 for impurity
    4. independent of T for both
    Answer and solution

    Answer: C

    More phonons at higher T means more lattice scattering: μL∝T−3/2. Ionised impurities deflect slow carriers most strongly (Rutherford-like); faster carriers at higher T are deflected less: μI∝T3/2. Combined by Matthiessen's rule, 1/μ=1/μL+1/μI, the mobility rises at low T and falls at high T.

    Why people get this wrong: Thinking every kind of scattering gets worse with heating; impurity scattering gets weaker.

  24. MCQHard

    An n-type sample (n0=1016 cm−3, p0=104 cm−3) is steadily lit, creating 1013 cm−3 extra electron-hole pairs. Compared with the dark Fermi level, the quasi-Fermi levels for electrons and holes
    1. both stay where the dark Fermi level was
    2. both move by the same large amount
    3. electrons' moves far towards the conduction band, holes' barely moves
    4. electrons' barely moves, holes' moves far towards the valence band
    Answer and solution

    Answer: D

    Electrons: n=1.001×1016, a 0.1% change, so Fn shifts by kTln⁡1.001≈0.03 meV. Holes: p rises from 104 to 1013 cm−3, a factor 109, so Fp moves down by kTln⁡109≈0.54 eV. Light changes the minority carriers enormously and the majority carriers hardly at all (low-level injection).

    Why people get this wrong: Assuming equal shifts because equal numbers of electrons and holes are added; what matters is the ratio to the starting density.

  25. MCQHard

    Near the top of a valence band, E(k) curves downward. Which description is correct?
    1. An electron there has a negative effective mass, and the missing electron (hole) behaves as a positive charge with positive effective mass.
    2. An electron there has a positive effective mass, and the hole has a negative effective mass.
    3. Both the electron and the hole have negative effective mass.
    4. The effective mass has no meaning at a band maximum.
    Answer and solution

    Answer: A

    m∗=ℏ2/(d2E/dk2), negative where the band curves down: an electron there accelerates opposite to the force. Describing the empty state instead, the hole has charge +e and effective mass mh=−me∗>0, so it moves like an ordinary positive particle. This is why holes give a positive Hall coefficient.

    Why people get this wrong: Giving the hole the electron's negative mass; flipping the charge and the mass together gives normal behaviour.

  26. MSQHard

    For a semiconductor with both electrons and holes, the Hall coefficient is RH=pμp2−nμn2e(nμn+pμp)2. Which statements are correct?
    1. The Hall voltage does not depend on the magnetic field.
    2. For intrinsic material with μn>μp, RH is negative.
    3. A strongly p-type sample has positive RH.
    4. A p-type sample can have RH=0 at some temperature, as intrinsic carriers grow.
    Answer and solution

    Answer: B, C, D

    B: with n=p, the sign is that of μp2−μn2<0. C: when p≫n, RH→1/pe>0. D: on heating, n grows until pμp2=nμn2; there RH passes through zero and turns negative. A is false: VH=RHIB/t is proportional to B.

    Why people get this wrong: Thinking RH=0 means no carriers; it means the two kinds of carriers balance.

  27. NATHard

    Near a conduction-band minimum, E(k)=Ec+αk2 with α=19.05 eV Å2. Using ℏ2/(2me)=3.810 eV Å2, the effective mass is ______ me (to three decimal places).
    Answer and solution

    Answer: 0.2 $m_e$ (±0.002)

    Compare with a free electron, E=ℏ2k2/2m∗: α=ℏ22m∗, so m∗me=ℏ2/2meα=3.81019.05=0.200. A sharply curved band means a light carrier.

    Why people get this wrong: Inverting the ratio (5.0): a larger α means a steeper band and a smaller mass.

  28. NATHard

    In silicon (μn=1350, μp=480 cm2/V s), what ratio p/n of hole to electron density makes the Hall coefficient zero? ______ (to two decimal places)
    Answer and solution

    Answer: 7.91 (±0.02)

    RH∝pμp2−nμn2=0 gives pn=(μnμp)2=(2.8125)2=7.91. Even with nearly eight times as many holes, the faster electrons balance them in the Hall effect.

    Why people get this wrong: Using the first power of the mobility ratio (2.81), which is the condition for equal conductivity contributions, not zero Hall coefficient.

  29. NATHard

    n-type silicon (εr=11.7) has 1016 cm−3 ionised donors at 300 K. Its extrinsic Debye length LD=εkBTe2Nd is ______ nm (to one decimal place).
    Answer and solution

    Answer: 40.9 nm (±0.4)

    Nd=1016 cm−3=1022 m−3. εkBTe2Nd=(11.7)(8.854×10−12)(0.02585 V)(1.602×10−19)(1022)=1.67×10−15 m2 (using kBT/e=0.02585 V), so LD=4.09×10−8 m =40.9 nm. Charge imbalances smaller than this are smeared out; it also sets how sharply a depletion edge fades.

    Why people get this wrong: Forgetting the cm−3 to m−3 conversion (factor 106) changes LD by a factor 103.

  30. MCQHard

    n-type silicon with Nd=1016 cm−3, μn=1350 cm2/V s and εr=11.7 has some excess majority charge put into it. The time over which this space charge disappears (the dielectric relaxation time) is about
    1. 0.5 μs
    2. 1 ns
    3. 0.5 ps
    4. 5 fs
    Answer and solution

    Answer: C

    Gauss's law plus Ohm's law give ∂ρ/∂t=−(σ/ε)ρ, so τd=ε/σ. σ=eNdμn=(1.602×10−19)(1022)(0.135)=216 S/m, and ε=11.7×8.854×10−12=1.04×10−10 F/m. τd=4.8×10−13 s ≈0.5 ps. Majority carriers neutralise charge almost instantly; minority carriers, which must recombine, live for microseconds.

    Why people get this wrong: Confusing dielectric relaxation (majority carriers, picoseconds) with minority-carrier lifetime (recombination, often microseconds).

← All topics · Timed mock test →