Home / Courses / GATE Physics / Practice / Rigid body dynamics: inertia tensor, Euler's equations and tops

Rigid body dynamics: inertia tensor, Euler's equations and tops

Classical mechanics (GATE and NET) · 84 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Rigid body dynamics: inertia tensor and Euler's equations.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A rigid body has inertia tensor I about a point. Its moment of inertia about an axis through that point along the unit vector nˆ is
    1. nˆTInˆ
    2. tr⁡I
    3. |Inˆ|
    4. det⁡I
    Answer and solution

    Answer: A

    Inˆ=∑ijIijninj=∑m(r2−(r→⋅nˆ)2), which is the sum of m×(distance from the axis)2. For nˆ along x it gives Ixx.
  2. MCQWarm-up

    For a rigid body rotating about a fixed point, the angular momentum L→=Iω→ is parallel to ω→
    1. always
    2. only when ω→ lies along a principal axis (or the principal moments are equal)
    3. only when the body is a sphere
    4. never
    Answer and solution

    Answer: B

    In principal axes L→=(I1ω1,I2ω2,I3ω3). This is a multiple of ω→ only if ω→ is an eigenvector of I: along a principal axis, or in a plane of equal moments. A sphere or cube (I1=I2=I3) has L→∥ω→ for every axis.
  3. NATWarm-up

    A uniform solid cube has mass 6 kg and side 1 m. Its moment of inertia about any axis through its centre is ______ kg m².
    Answer and solution

    Answer: 1 kg m²

    About an axis through the centre parallel to an edge, I=M(a2+a2)/12=Ma2/6=1 kg m². All three principal moments are equal, so the inertia tensor is a multiple of the unit matrix and every axis through the centre (including a body diagonal) gives the same value.

    Why people get this wrong: Students often expect the diagonal to be different; symmetry makes the cube behave like a sphere for rotation.

  4. MCQWarm-up

    The kinetic energy of a rigid body rotating with angular velocity ω→ about a fixed point is
    1. 12|Iω→|2
    2. 12ω2tr⁡I
    3. 12ω→TIω→
    4. 12Iω
    Answer and solution

    Answer: C

    T=12∑m|ω→×r→|2=12ω→TIω→=12ω→⋅L→. In principal axes: 12(I1ω12+I2ω22+I3ω32).
  5. MCQWarm-up

    For a body with principal moments I1,I2,I3 and no external torque, Euler's equation for ω1 is
    1. I1ω˙1=(I3−I2)ω2ω3
    2. I1ω˙1=(I2+I3)ω2ω3
    3. I1ω˙1=0
    4. I1ω˙1=(I2−I3)ω2ω3
    Answer and solution

    Answer: D

    In the body frame L→˙+ω→×L→=τ→=0. The first component: I1ω˙1+ω2I3ω3−ω3I2ω2=0, so I1ω˙1=(I2−I3)ω2ω3. The others follow by cycling 1→2→3.

    Why people get this wrong: The cyclic order fixes the sign: for ω1 it is I2−I3.

  6. NATWarm-up

    A gyroscope wheel (I=0.002 kg m², spinning at 200 rad/s) of mass 0.5 kg is supported at one end of its horizontal axle, its centre of mass 0.1 m from the pivot. Its precession rate is ______ rad/s (g=9.8 m/s²).
    Answer and solution

    Answer: 1.225 rad/s (±0.01)

    Gravity's torque Mgr=0.49 N m turns the horizontal angular momentum Iω=0.4 kg m²/s, so Ω=Mgr/(Iω)=1.225 rad/s (for a fast spin, ignoring the small extra angular momentum of the precession itself).
  7. MCQWarm-up

    The perpendicular-axis theorem Iz=Ix+Iy holds for
    1. any rigid body, with the axes through its centre of mass
    2. any body with an axis of symmetry along z
    3. a flat body lying in the xy plane, with the three axes meeting at a point of that plane
    4. circular discs and rings only
    Answer and solution

    Answer: C

    Ix=∑m(y2+z2) and Iy=∑m(x2+z2), so Ix+Iy=∑m(x2+y2)+2∑mz2=Iz+2∑mz2. This equals Iz only when every mass element has z=0: a lamina in the xy plane. The meeting point can be anywhere in the plane, not just the centre of mass.

    Why people get this wrong: It is the parallel-axis theorem that works for any body; the perpendicular-axis theorem needs a flat body.

  8. NATStandard

    Point masses of 1 kg at (1,1,0) m and 2 kg at (1,−1,0) m form a rigid body. With Ixy=−∑mxy, the product of inertia Ixy is ______ kg m².
    Answer and solution

    Answer: 1 kg m²

    ∑mxy=1(1)(1)+2(1)(−1)=−1, so Ixy=+1 kg m².

    Why people get this wrong: Watch both the minus sign in the definition and the negative coordinate.

  9. MCQStandard

    A thin uniform square plate of mass M and side a lies in the xy plane, centred at the origin with edges along the axes. Its principal moments about the centre are
    1. 112Ma2, 112Ma2, 16Ma2
    2. 16Ma2, 16Ma2, 13Ma2
    3. 112Ma2 three times
    4. 13Ma2, 13Ma2, 23Ma2
    Answer and solution

    Answer: A

    In-plane axes: Ix=Iy=Ma2/12 (like a rod of length a). Perpendicular axis: Iz=Ix+Iy=Ma2/6. Because Ix=Iy, every axis in the plane through the centre (including the diagonals) is also principal with Ma2/12.
  10. MSQStandard

    Which statements about the inertia tensor of a rigid body are always true?
    1. Its principal moments are real and non-negative
    2. Its principal axes can be chosen mutually perpendicular
    3. For any labelling of the principal moments, I1+I2≥I3
    4. Its off-diagonal elements are unchanged when the axes are rotated
    Answer and solution

    Answer: A, B, C

    I is real and symmetric, so its eigenvalues are real and its eigenvectors orthogonal; each eigenvalue is a sum of m×(distance)2, so non-negative. I1+I2−I3=2∑mz2≥0 in principal axes (equality for a flat body, the perpendicular axis theorem). Off-diagonal elements change with the axes; they vanish in principal axes.
  11. MCQStandard

    A torque-free symmetric body (I1=I2) spins with ω3 about its symmetry axis plus a small ω⟂. In the body frame, ω→⟂ rotates about the symmetry axis at
    1. ω3
    2. Ω=I3−I1I1ω3
    3. Ω=I1I3ω3
    4. Ω=I3I1ω3
    Answer and solution

    Answer: B

    Euler's equations with I1=I2: ω˙3=0, and ω˙1=−Ωω2, ω˙2=Ωω1 with Ω=(I3−I1)ω3/I1. So (ω1,ω2) turns at rate Ω, in the same sense as the spin for an oblate body (I3>I1) and opposite for a prolate one.
  12. NATStandard

    A rigid body is a single 2 kg point mass at (1,2,2) m (plus a massless frame to the origin). The trace of its inertia tensor about the origin is ______ kg m².
    Answer and solution

    Answer: 36 kg m²

    Ixx=m(y2+z2)=16, Iyy=m(x2+z2)=10, Izz=m(x2+y2)=10. Trace =36=2mr2 (each r2 is counted twice), and the trace is the same in every set of axes.
  13. MCQStandard

    Treat the Earth as a rigid, torque-free oblate body with (I3−I1)/I1≈1/305, spinning once a day. If its rotation axis is slightly off its symmetry axis, the axis wobbles (in the body) with a period of about
    1. 1 day
    2. 26 000 years
    3. 305 days
    4. 1 year
    Answer and solution

    Answer: C

    Ω=I3−I1I1ω3=ω3/305, so the period is 305 days (the Euler period). The observed Chandler wobble is about 433 days because the Earth is elastic. The 26 000-year precession is a different, torque-driven effect.
  14. NATStandard

    A body has principal moments (1,2,3) kg m² and angular velocity ω→=(1,1,1) rad/s in principal axes. Its rotational kinetic energy is ______ J.
    Answer and solution

    Answer: 3 J

    L→=(1,2,3) kg m²/s and T=12ω→⋅L→=12(1+2+3)=3 J.
  15. MSQStandard

    A rigid body with three different principal moments spins freely (no torque). Which statements are correct?
    1. Rotation about the axis of largest moment is stable
    2. Rotation about the axis of smallest moment is stable, if no energy is lost
    3. Rotation about the intermediate axis is unstable
    4. If the body slowly loses energy internally (flexing), it ends up spinning about its axis of smallest moment
    Answer and solution

    Answer: A, B, C

    Linearising Euler's equations about steady spin around axis i gives oscillation when Ii is largest or smallest and exponential growth when it is intermediate (the tennis racket theorem). With dissipation at fixed L, the energy L2/2I is lowest for the largest I, so the body drifts to the axis of largest moment (as the Explorer 1 satellite did).
  16. MCQStandard

    The inertia tensor about a point displaced by a→ from the centre of mass is related to that about the centre of mass by
    1. Iij=Iijcm+Ma2δij
    2. Iij=Iijcm−M(a2δij−aiaj)
    3. Iij=Iijcm+Maiaj
    4. Iij=Iijcm+M(a2δij−aiaj)
    Answer and solution

    Answer: D

    Substituting r→=a→+r→′ into ∑m(r2δij−xixj), the cross terms vanish because ∑mr→′=0, leaving the extra term of a point mass M at a→. The diagonal part is the familiar parallel-axis theorem.
  17. MCQStandard

    A heavy symmetric top with a fixed tip has L=12I1(θ˙2+ϕ˙2sin2⁡θ)+12I3(ψ˙+ϕ˙cos⁡θ)2−Mglcos⁡θ in Euler angles. Which coordinates are cyclic?
    1. ϕ and ψ
    2. θ only
    3. θ and ϕ
    4. none
    Answer and solution

    Answer: A

    L contains θ but neither ϕ nor ψ, so pϕ (the vertical component of L→) and pψ=I3ω3 (the component along the symmetry axis) are conserved. With the energy, that reduces the problem to one dimension in θ.
  18. MCQStandard

    How many independent components does the inertia tensor of a general rigid body (about a given point) have?
    1. 9
    2. 6
    3. 3
    4. 4
    Answer and solution

    Answer: B

    It is a symmetric 3×3 matrix (Iij=Iji): three diagonal moments and three products of inertia, 6 in all. Choosing principal axes uses three angles, leaving the three principal moments.
  19. MCQStandard

    A uniform solid ball rolls without slipping along a level floor. The fraction of its kinetic energy that is rotational is
    1. 25
    2. 27
    3. 57
    4. 12
    Answer and solution

    Answer: B

    Rolling: ω=v/R. Krot=12⋅25mR2ω2=15mv2 and Ktrans=12mv2. Fraction: 1/51/2+1/5=27.

    Why people get this wrong: 25 is the ratio Krot/Ktrans, not the fraction of the total.

  20. NATStandard

    About a point O, a body has inertia tensor I=(2−10−120003) kg m². Its moment of inertia about the axis through O along (1,1,1) is ______ kg m² (to two decimal places).
    Answer and solution

    Answer: 1.67 kg m² (±0.01)

    Inˆ=nˆTInˆ with nˆ=(1,1,1)/3. This is the sum of all nine entries divided by 3: (2−1+0−1+2+0+0+0+3)/3=5/3=1.67 kg m².

    Why people get this wrong: Forgetting to normalise the axis gives 5; leaving out the off-diagonal entries gives 7/3.

  21. NATExam level

    A body has principal moments (1,2,3) kg m² and angular velocity (1,1,1) rad/s in principal axes. The angle between L→ and ω→ is ______ degrees.
    Answer and solution

    Answer: 22.21 ° (±0.2)

    L→=(1,2,3). cos⁡α=L→⋅ω→|L→||ω→|=6143=0.926, so α=22.2∘.
  22. NATExam level

    A dumbbell has 1 kg masses at (1,1,0) m and (−1,−1,0) m. Its moment of inertia about the axis through the origin along (1,−1,0) is ______ kg m².
    Answer and solution

    Answer: 4 kg m²

    Ixx=Iyy=2, Izz=4, Ixy=−∑mxy=−2. With nˆ=(1,−1,0)/2: nˆTInˆ=12(Ixx+Iyy−2Ixy)=12(2+2+4)=4 kg m². Check: each mass is 2 m from that axis, so 2×1×2=4. (Along the rod, (1,1,0), the moment is 0.)
  23. MCQExam level

    A free body with I1<I2<I3 spins at ω about axis 2. Small perturbations ω1,ω3 grow as eλt with
    1. λ2=ω2(I3−I2)(I2−I1)I1I2
    2. λ2=−ω2(I3−I2)(I2−I1)I1I3
    3. λ2=ω2(I3−I2)(I2−I1)I1I3
    4. λ=ω
    Answer and solution

    Answer: C

    Linearise with ω2≈ω: I1ω˙1=(I2−I3)ωω3 and I3ω˙3=(I1−I2)ωω1. Then ω¨1=(I2−I3)(I1−I2)I1I3ω2ω1=+(I3−I2)(I2−I1)I1I3ω2ω1: positive, so exponential growth.
  24. NATExam level

    A torque-free rod-like symmetric body has I3/I1=0.4 and spins with ω3=20 rad/s plus a small wobble. The magnitude of the rate at which ω→ circles the symmetry axis in the body frame is ______ rad/s.
    Answer and solution

    Answer: 12 rad/s (±0.05)

    Ω=I3−I1I1ω3=(0.4−1)×20=−12 rad/s: 12 rad/s, in the opposite sense to the spin because the body is prolate.
  25. MSQExam level

    For a heavy symmetric top with its tip fixed, which statements are correct?
    1. pϕ and pψ are constants of the motion
    2. The spin ω3=ψ˙+ϕ˙cos⁡θ is constant
    3. In general the tilt θ oscillates (nutates) between two limiting angles
    4. The precession rate ϕ˙ is always constant
    Answer and solution

    Answer: A, B, C

    ϕ, ψ cyclic gives A, and pψ=I3ω3 gives B. Energy conservation with the effective potential Ueff(θ) confines θ between two turning angles: nutation. ϕ˙=(pϕ−pψcos⁡θ)/(I1sin2⁡θ) changes as θ nutates; it is constant only for steady precession.
  26. NATExam level

    A top spins upright ("sleeps") on a fixed point. It has I3=2×10−4 kg m², I1=3×10−4 kg m² about the tip, mass 0.1 kg and its centre of mass 0.04 m above the tip. The smallest spin for which upright spinning is stable is ______ rad/s (g=9.8 m/s²).
    Answer and solution

    Answer: 34.29 rad/s (±0.3)

    Expanding Ueff about θ=0 with pϕ=pψ=I3ω3 gives stability when I32ω32>4I1Mgl. So ω3>4×3×10−4×0.1×9.8×0.04/(2×10−4)=6.86×10−3/2×10−4=34.3 rad/s. As friction slows it below this, the top starts to wobble and fall.
  27. MCQExam level

    A fast symmetric top (spin ω3, I3ω3 much larger than everything else) precesses steadily. Its slow precession rate is approximately
    1. I3ω3I1cos⁡θ
    2. Mgl/I1
    3. Mglsin⁡θI3ω3
    4. MglI3ω3, independent of the tilt
    Answer and solution

    Answer: D

    Steady precession needs Mgl=ϕ˙(I3ω3−I1ϕ˙cos⁡θ). For a fast top the slow root is ϕ˙≈Mgl/(I3ω3): the torque Mglsin⁡θ turns the horizontal part I3ω3sin⁡θ of L→, and the sin⁡θ cancels. The other root, I3ω3/(I1cos⁡θ), is the fast precession.
  28. NATExam level

    A fast top (mass 0.2 kg, centre of mass 0.05 m from the tip, I3=4×10−4 kg m²) spins at 300 rad/s. The period of its slow precession is ______ s (g=9.8 m/s²).
    Answer and solution

    Answer: 7.694 s (±0.05)

    Ω=Mgl/(I3ω3)=0.098/0.12=0.817 rad/s, so the period is 2π/0.817=7.69 s.
  29. MCQExam level

    With Euler angles (ϕ,θ,ψ) in the usual z-x-z convention, the component of ω→ along the body's symmetry axis (body z) is
    1. ψ˙+ϕ˙cos⁡θ
    2. ϕ˙+ψ˙cos⁡θ
    3. θ˙+ψ˙
    4. ψ˙cos⁡θ
    Answer and solution

    Answer: A

    ω→=ϕ˙zˆspace+θ˙eˆnode+ψ˙zˆbody. The line of nodes is perpendicular to the body z axis, and the space z axis makes angle θ with it, so ω3=ψ˙+ϕ˙cos⁡θ.
  30. MSQExam level

    A rigid body is driven to rotate with constant ω→ about a fixed axis that is not a principal axis. Which statements are correct?
    1. A torque ω→×L→ must be applied by the bearings to keep ω→ constant
    2. L→ is fixed in the body but sweeps round in space
    3. If the centre of mass lies on the axis, the bearings feel no force at all
    4. The needed torque vanishes if the axis is a principal axis
    Answer and solution

    Answer: A, B, D

    L→=Iω→ is fixed relative to the body, so in space dL→/dt=ω→×L→≠0 unless L→∥ω→. The bearings supply this torque through a rotating couple of forces even when the centre of mass is on the axis (static balance without dynamic balance). This is why car wheels are balanced dynamically.

← All topics · Timed mock test →