Home / Courses / GATE Physics / Practice / Potential and electrostatic energy

Potential and electrostatic energy

Electricity and magnetism · 31 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The potential in a region is V=3x2y volts (x,y in metres). The electric field at (1,2,0) is
    1. 12iˆ+3jˆ V/m
    2. −12iˆ−3jˆ V/m
    3. −6iˆ−3jˆ V/m
    4. −12iˆ−6jˆ V/m
    Answer and solution

    Answer: B

    E→=−∇V=−(6xyiˆ+3x2jˆ)=−(12iˆ+3jˆ) V/m at (1,2,0).

    Why people get this wrong: Dropping the minus sign in E→=−∇V (option A).

  2. MSQStandard

    Which statements are correct for electrostatics?
    1. Wherever V=0, the field is also zero.
    2. In a region where V is constant, E→=0.
    3. E→ points towards decreasing V.
    4. Equipotential surfaces cut field lines at right angles.
    Answer and solution

    Answer: B, C, D

    B, C, D follow from E→=−∇V. A is false: midway between +q and −q, V=0 but E→≠0; and midway between two equal charges E=0 but V≠0.
  3. MCQStandard

    Why can the potential of an infinitely long line charge not be set to zero at infinity?
    1. Because the field of a line charge is zero at infinity.
    2. Because V(s)=−λ2πϵ0ln⁡s+ const diverges as s→∞, since the charge itself extends to infinity.
    3. Because the line charge field is not conservative.
    4. It can: V=λ/(2πϵ0s).
    Answer and solution

    Answer: B

    Integrating E=λ/(2πϵ0s) gives a logarithm, which grows without bound. The reference point must be at a finite distance s0: V(s)=−λ2πϵ0ln⁡(s/s0). The field is still perfectly conservative.

    Why people get this wrong: D: integrating 1/s gives ln⁡s, not 1/s.

  4. NATExam level

    For a uniformly charged non-conducting solid sphere, the ratio of the potential at its centre to the potential at its surface is ______ (to two decimal places).
    Answer and solution

    Answer: 1.5 (±0.01)

    Inside, V(r)=kQ2R3(3R2−r2) (found by integrating E=kQr/R3 inwards from the surface value kQ/R). At r=0, V=3kQ2R, so the ratio is 3/2.

    Why people get this wrong: Thinking V is constant inside as for a conductor: that needs E=0 inside.

  5. MCQExam level

    In a region the potential is V=V0(x2+y2+z2)/a2. The charge density there is
    1. −6ϵ0V0/a2
    2. +6ϵ0V0/a2
    3. −2ϵ0V0/a2
    4. zero
    Answer and solution

    Answer: A

    Poisson: ∇2V=−ρ/ϵ0. Here ∇2V=V0(2+2+2)/a2=6V0/a2, so ρ=−6ϵ0V0/a2.

    Why people get this wrong: Missing the minus sign in Poisson's equation.

  6. MSQExam level

    Consider E→=2xyiˆ+(x2+2yz)jˆ+y2kˆ (SI units). Which statements are correct?
    1. E→ can be an electrostatic field.
    2. A potential for it is V=−(x2y+y2z).
    3. The region is free of charge.
    4. V(0,0,0)−V(1,1,1)=2 V.
    Answer and solution

    Answer: A, B, D

    Curl: ∂yEz−∂zEy=2y−2y=0; ∂zEx−∂xEz=0; ∂xEy−∂yEx=2x−2x=0. So A is true. B: −∇(−(x2y+y2z))=(2xy,x2+2yz,y2). C is false: ∇⋅E→=2y+2z≠0. D: V(1,1,1)=−2, so V(0)−V(1,1,1)=0−(−2)=2 V.
  7. NATExam level

    What fraction of the total field energy of a uniformly charged solid sphere lies outside the sphere? (Three decimal places.)
    Answer and solution

    Answer: 0.833 (±0.005)

    Outside, the field is that of a point charge, and ∫R∞12ϵ0E24πr2dr=kQ22R. The total is 35kQ2R. Fraction =1/23/5=56≈0.833. (Inside holds 110kQ2/R.)
  8. NATExam level

    A polar molecule with p=6.2×10−30 C m sits in a field of 5.0×105 V/m. The energy difference between its anti-aligned and aligned orientations is ______ μeV (to one decimal place).
    Answer and solution

    Answer: 38.7 $\mu$eV (±0.4)

    ΔU=2pE=2(6.2×10−30)(5.0×105)=6.2×10−24 J =6.2×10−241.602×10−19 eV ≈3.87×10−5 eV =38.7μeV. That is far below kBT≈25 meV at room temperature, which is why such molecules stay mostly disordered.
  9. NATExam level

    A long wire of radius 1.0 mm carries 10 nC/m. The potential difference between its surface and a coaxial cylinder of radius 1.0 cm is ______ V (to the nearest whole number).
    Answer and solution

    Answer: 414 V (±4)

    ΔV=∫abλ2πϵ0sds=λ2πϵ0ln⁡ba=2(8.99×109)(10−8)ln⁡10≈179.8×2.303≈414 V.
  10. MSQExam level

    Which of these potentials could exist in a charge-free region (a, k constants)?
    1. a(x2−y2)
    2. axy
    3. a(x2+y2+z2)
    4. ae−kxsin⁡(ky)
    Answer and solution

    Answer: A, B, D

    Charge-free means ∇2V=0 (Laplace). A: 2a−2a=0. B: 0. C: 6a≠0. D: ∂x2 gives k2V, ∂y2 gives −k2V; they cancel.
  11. NATExam level

    Two concentric thin spherical shells have radii 10 cm and 20 cm and carry +2.0 nC and −1.0 nC. The potential at the common centre is ______ V (to the nearest whole number).
    Answer and solution

    Answer: 135 V (±1.4)

    Inside a shell, its potential is constant at its surface value. So V(0)=k(2×10−90.10+−1×10−90.20)=(8.99×109)(1.5×10−8)≈135 V.

    Why people get this wrong: Setting the outer shell's contribution to zero because its field is zero inside it.

  12. MCQExam level

    Two identical point dipoles of moment p are a fixed distance r apart (centre to centre, r much larger than their size). For which arrangement is their mutual potential energy the lowest?
    1. Side by side, both pointing the same way, perpendicular to the line joining them
    2. Side by side, pointing opposite ways, perpendicular to the line joining them
    3. Both along the line joining them, pointing towards each other
    4. Both along the line joining them, pointing the same way (head to tail)
    Answer and solution

    Answer: D

    The interaction energy is U=14πϵ0r3[p→1⋅p→2−3(p→1⋅rˆ)(p→2⋅rˆ)]. Side by side, parallel: U=+p2/(4πϵ0r3). Side by side, antiparallel: −p2/(4πϵ0r3). Along the line, head to head: p→1⋅p→2=−p2 and (p→1⋅rˆ)(p→2⋅rˆ)=−p2, giving +2p2/(4πϵ0r3). Head to tail: p2−3p2=−2p2, so U=−2p2/(4πϵ0r3), the lowest.

    Why people get this wrong: Picking antiparallel side by side because "opposite dipoles attract"; it is lower than parallel side by side but only half as low as head to tail.

  13. MCQExam level

    In some region the potential is V(x,z)=V0e−kzcos⁡kx, with V0 and k constants. The charge density in the region is
    1. −2ϵ0k2V
    2. +2ϵ0k2V
    3. zero
    4. −ϵ0k2V
    Answer and solution

    Answer: C

    Poisson: ρ=−ϵ0∇2V. Here ∂2V∂x2=−k2V and ∂2V∂z2=+k2V, so ∇2V=0 and ρ=0. (This is the kind of potential that sits above a surface held at V0cos⁡kx and dies away from it.)

    Why people get this wrong: Seeing the cos⁡ factor and stopping at −k2V, forgetting the exponential gives +k2V.

  14. MCQHard

    For two point charges, W=ϵ02∫E2dτ is never negative, yet U=q1q2/(4πϵ0r) is negative for unlike charges. Which explanation is right?
    1. The field formula is wrong for point charges.
    2. ∫E2 also contains the (infinite, positive) self-energies of each point charge; U is only the interaction part, which can be negative.
    3. U should always be quoted as a magnitude.
    4. Unlike charges have no field energy between them.
    Answer and solution

    Answer: B

    E2=E12+E22+2E→1⋅E→2. The first two terms integrate to the self-energies (infinite for true points); the cross term integrates exactly to q1q2/(4πϵ0r). Changes in configuration change only the cross term, so U is the useful part.
  15. NATHard

    In the classical Bohr picture of hydrogen, the electrostatic potential energy of the electron at the Bohr radius a0=5.29×10−11 m is ______ eV (to one decimal place, with sign).
    Answer and solution

    Answer: -27.2 eV (±0.1)

    U=−e24πϵ0a0. In eV, divide by e: −(8.99×109)(1.602×10−19)5.29×10−11≈−27.2 eV. (The total energy is half of this, −13.6 eV.)

    Why people get this wrong: Answering −13.6 eV, which is the total energy, not the potential energy.

  16. MSQHard

    A screened potential has the form V(r)=Ae−r/λr (A,λ>0). Which are correct?
    1. The field is radial.
    2. For r>0 the charge density is ρ=−ϵ0Ae−r/λλ2r.
    3. The charge enclosed by a sphere of radius r tends to zero as r→∞.
    4. For r>0 the charge density has the same sign as A.
    Answer and solution

    Answer: A, B, C

    A: V depends on r only. B: for r>0, ∇2V=1rd2dr2(rV)=Ae−r/λλ2r, and ρ=−ϵ0∇2V. C: E=Ae−r/λ(1r2+1λr), so Q(r)=4πϵ0r2E=4πϵ0Ae−r/λ(1+r/λ)→0. A point charge 4πϵ0A at the origin is exactly cancelled by a cloud of opposite charge. D is false: the cloud has the opposite sign.
  17. MCQHard

    An isolated charged spherical shell (a bubble) slowly expands from radius R to 2R with its charge fixed. Its electrostatic energy
    1. doubles
    2. is unchanged
    3. halves, the difference doing work on whatever holds the bubble
    4. falls to a quarter
    Answer and solution

    Answer: C

    U=Q2/(8πϵ0R)∝1/R, so it halves. The field energy between R and 2R is gone; the electric pressure on the surface did that much work pushing it outward.
  18. NATHard

    Treat the electron as a thin shell of charge whose electrostatic energy equals its rest energy mec2. Its radius is ______ fm (to two decimal places).
    Answer and solution

    Answer: 1.41 fm (±0.02)

    Shell energy e28πϵ0r=mec2 gives r=e28πϵ0mec2=(8.99×109)(1.602×10−19)22(8.187×10−14)≈1.41×10−15 m. (The "classical electron radius" 2.82 fm drops the factor 2.)

    Why people get this wrong: Quoting 2.82 fm from memory; that uses e2/(4πϵ0r)=mec2.

  19. NATHard

    Charges +q, −2q, +q (with q=1.0 nC) sit on the z-axis at z=−1 mm, 0, +1 mm. The potential on the axis at z=10 cm is ______ mV (to one decimal place).
    Answer and solution

    Answer: 18 mV (±0.2)

    Total charge and dipole moment are both zero, so the leading term is the quadrupole: V=kq(1z−d−2z+1z+d)=2kqd2z(z2−d2)≈2kqd2z3. Numbers: 2(8.99)(10−6)10−3≈0.0180 V =18.0 mV.

    Why people get this wrong: Expecting zero because the net charge is zero; the monopole and dipole terms vanish but the quadrupole does not.

  20. MCQHard

    A point charge sits inside a neutral conducting spherical shell, first at the centre, then moved off-centre (still inside). The potential of the shell
    1. increases
    2. decreases
    3. stays the same
    4. becomes zero
    Answer and solution

    Answer: C

    The induced charge on the outer surface is +q spread uniformly in both cases (the metal shields it from the inside arrangement). The field outside, and so the shell's potential kq/Router, does not change. Only the charge on the inner wall rearranges.
  21. MSQHard

    For conductors in electrostatic equilibrium, which are correct?
    1. The whole surface of a conductor is at one potential.
    2. On an isolated conductor of irregular shape, the surface charge density is the same everywhere.
    3. Just outside the surface, the field is σ/ϵ0 and normal to the surface.
    4. Inside an empty cavity in a conductor, the field is zero, however the conductor is charged or what fields are outside.
    Answer and solution

    Answer: A, C, D

    A: E→=0 in the metal, so V is the same throughout it, surface included. C: a pillbox with one face in the metal gives EA=σA/ϵ0; any tangential component would drive surface currents. D: the cavity is bounded by one equipotential and contains no charge, so the unique solution of Laplace's equation is V = constant (this is how a Faraday cage works). B is false: σ is largest where the surface curves most sharply.
  22. NATHard

    A charge +q is at the origin and a charge −q/2 is at x=6.0 cm. The surface on which the total potential is zero is a sphere. Its radius is ______ cm (to one decimal place).
    Answer and solution

    Answer: 4 cm (±0.05)

    On the zero surface qr1=q/2r2, i.e. r1=2r2 (an Apollonius sphere). On the x-axis: between the charges, x=2(6−x) gives x=4 cm; beyond the −q/2 charge, x=2(x−6) gives x=12 cm. These are the ends of a diameter, so the radius is (12−4)/2=4.0 cm (centre at x=8 cm).

    Why people get this wrong: Finding only one zero on the axis and taking its distance from a charge as the radius.

  23. MSQHard

    In a region of space with no charge, the potential obeys Laplace's equation ∇2V=0. Which statements are correct?
    1. V has no local maximum or minimum inside the region
    2. The value of V at any point equals its average over any sphere centred there and lying inside the region
    3. V inside a closed region is fixed uniquely by its values on the boundary
    4. Wherever V=0, the electric field is also zero
    Answer and solution

    Answer: A, B, C

    Solutions of Laplace's equation are "as smooth as possible": the mean-value property holds, so a point cannot be higher (or lower) than all its neighbours, and extremes occur only on the boundary. That is also why a charge cannot be held in stable equilibrium by electrostatic fields alone (Earnshaw). The uniqueness theorem fixes V from the boundary values. V=0 at a point says nothing about its slope, so E→=−∇V need not vanish there.

    Why people get this wrong: The value of V depends on where you put the zero; the field depends only on how V changes.

  24. NATTop rank

    A sphere of radius R has charge density ρ=ρ0r/R and total charge Q. Its electrostatic energy is αQ24πϵ0R. Find α (to three decimal places).
    Answer and solution

    Answer: 0.571 (±0.003)

    Q=πρ0R3. Inside, E=ρ0r24ϵ0R; outside, E=Q4πϵ0r2. Energy inside: ϵ02∫0Rρ02r416ϵ02R24πr2dr=πρ02R556ϵ0. Outside: Q28πϵ0R=πρ02R58ϵ0. Total πρ02R57ϵ0=Q27πϵ0R=47⋅Q24πϵ0R. So α=4/7≈0.571, a little less than 0.6 for a uniform sphere because the charge sits further out.
  25. NATTop rank

    A conducting sphere of radius R carries charge Q. It is surrounded by a concentric, neutral, conducting thick shell of inner radius 2R and outer radius 3R. The total electrostatic energy is βQ24πϵ0R. Find β (to three decimal places).
    Answer and solution

    Answer: 0.417 (±0.003)

    The shell gets −Q on its inner face and +Q on its outer face. The field is kQ/r2 for R<r<2R, zero in the metal, and kQ/r2 for r>3R. Energy of a kQ/r2 field between a and b is kQ22(1a−1b). So U=kQ22(1R−12R)+kQ22⋅13R=kQ2(14+16)1R=512kQ2R; β=0.417.

    Why people get this wrong: Forgetting the field outside 3R (gives 0.25) or counting the metal region.

  26. MCQTop rank

    A thin disc of radius R is charged uniformly. The ratio of the potential at a point on its rim to the potential at its centre is
    1. 1/2
    2. 2/π
    3. π/4
    4. 1
    Answer and solution

    Answer: B

    Centre: rings of radius s give Vc=σ4πϵ0∫0R2πsdss=σR2ϵ0. Rim: use polar coordinates centred on the rim point; a chord at angle φ to the diameter has length 2Rcos⁡φ, so Vrim=σ4πϵ0∫−π/2π/2∫02Rcos⁡φρdρdφρ=σ4πϵ0(4R)=σRπϵ0. Ratio =1/π1/2=2π.

    Why people get this wrong: A disc is not a conductor, so its surface is not an equipotential (ratio 1 is wrong).

  27. MSQTop rank

    A point charge q>0 sits at the origin in an external uniform field E0iˆ. Which statements are correct?
    1. There is exactly one point where the total field is zero.
    2. That point lies on the positive x-axis.
    3. Along the x-axis the total potential has a local minimum at that point.
    4. A positive test charge placed at that point is in stable equilibrium.
    Answer and solution

    Answer: A, C

    The charge's field points away from it; it opposes E0iˆ only on the negative x-axis, where the magnitudes match at x=−q/(4πϵ0E0): one point (A), not on the positive axis (B false). On the negative axis V=q4πϵ0|x|−E0x, which goes to +∞ at both ends, so its stationary point is a minimum along x (C). But ∇2V=0 there, so V must curve downward in the transverse directions: the point is a saddle, and by Earnshaw's theorem no electrostatic equilibrium is stable (D false).

    Why people get this wrong: Reading a minimum along one line as a minimum in space. Laplace's equation forbids true minima in charge-free space.

  28. NATTop rank

    A fixed thin ring of radius 10 cm carries +50 nC. A 1.0 g bead with charge +2.0 nC can slide without friction along a straight horizontal wire lying along the ring's axis. It is released from rest on the axis 10 cm from the ring's centre and is pushed away. Its speed far from the ring is ______ cm/s (1/4πϵ0=9.0×109 N m²/C², one decimal place).
    Answer and solution

    Answer: 11.3 cm/s (±0.1)

    On the axis, V(x)=Q4πϵ0R2+x2. At x=R=0.1 m: V=9×109×5×10−80.1414=3182 V. Far away V=0, so the bead gains qV=2×10−9×3182=6.36×10−6 J. v=2×6.36×10−6/10−3=0.113 m/s =11.3 cm/s. (The centre is a point of equilibrium, but unstable along the axis, which is why the bead is pushed out.)

    Why people get this wrong: Using kQ/x (a point charge at the centre) instead of the ring's distance R2+x2 overestimates the potential.

← All topics · Timed mock test →