Home / Courses / GATE Physics / Practice / Maxwell's equations and electromagnetic waves

Maxwell's equations and electromagnetic waves

Electricity and magnetism · 32 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQStandard

    Which statements about the displacement current are correct?
    1. Taking the divergence of the Ampère-Maxwell law and using Gauss's law gives the continuity equation ∇⋅J→+∂ρ/∂t=0.
    2. Without it, Ampère's law would contradict charge conservation whenever charge density changes.
    3. It produces a magnetic field in the same way as a conduction current.
    4. It consists of charges moving through the gap of a capacitor.
    Answer and solution

    Answer: A, B, C

    ∇⋅(∇×B→)=0, so 0=μ0∇⋅J→+μ0ϵ0∂(∇⋅E→)/∂t=μ0(∇⋅J→+∂ρ/∂t). Without the extra term we would need ∇⋅J→=0 always, false while a capacitor charges. The term enters Ampère's law exactly like J→, so it makes B→ just the same. No charge crosses the gap: it is a changing field.

    Why people get this wrong: The word "current" misleads: nothing flows.

  2. MCQExam level

    A plane wave in vacuum has B→=B0cos⁡(kx+ωt)zˆ (k,ω>0). Its electric field is
    1. cB0cos⁡(kx+ωt)yˆ
    2. cB0cos⁡(kx+ωt)xˆ
    3. −cB0cos⁡(kx+ωt)yˆ
    4. (B0/c)cos⁡(kx+ωt)yˆ
    Answer and solution

    Answer: C

    The phase kx+ωt means travel along −xˆ. We need E→×B→ along −xˆ with B→ along zˆ (when the cosine is positive). yˆ×zˆ=+xˆ, so E→ must be along −yˆ: E→=−cB0cos⁡(kx+ωt)yˆ. Check with Faraday: ∂Bz/∂t=−ωB0sin⁡, and −(∇×E→)z=−∂Ey/∂x=−ckB0sin⁡=−ωB0sin⁡. ✓

    Why people get this wrong: Assuming every wave travels along +x and choosing +yˆ.

  3. MSQExam level

    Which statements about the Poynting vector S→=E→×B→/μ0 are correct?
    1. It gives the rate of energy flow per unit area.
    2. Its SI unit is W/m2.
    3. Poynting's theorem reads ∇⋅S→+∂u/∂t=−J→⋅E→.
    4. It is always zero when the fields are static.
    Answer and solution

    Answer: A, B, C

    Poynting's theorem is energy conservation for fields: the energy in a region falls by what flows out (∇⋅S→) and what the fields do on charges (J→⋅E→). Units: (V/m)(T)/(H/m) = W/m2. With static fields, S→ need not be zero: a battery feeding a resistor has steady E→ and B→, and S→ carries the energy from the battery to the resistor.

    Why people get this wrong: A static charge beside a magnet has non-zero S→ too, circulating with no net flow; "static" does not mean S→=0.

  4. NATExam level

    A straight wire of radius 1.0 mm and length 1.0 m has resistance 0.50 Ω and carries a steady 2.0 A. The magnitude of the Poynting vector at its surface is ______ W/m2 (to the nearest whole number).
    Answer and solution

    Answer: 318 W/m$^2$ (±3)

    At the surface E=V/L=IR/L along the wire and B=μ0I/(2πa) round it, so S=EBμ0=IRL⋅I2πa=I2R2πaL, pointing radially into the wire. S=4×0.502π(10−3)(1.0)=318 W/m2. Times the surface area 2πaL it gives exactly the Joule heating I2R=2 W: the energy enters from the field outside.

    Why people get this wrong: Dividing by the cross-section πa2; the energy enters through the side surface.

  5. NATExam level

    Copper has conductivity 5.8×107 S/m. The skin depth for a 1.0 MHz wave in copper is ______ μm (to one decimal place).
    Answer and solution

    Answer: 66.1 $\mu$m (±0.5)

    In a good conductor δ=2ωμ0σ=2(2π×106)(1.2566×10−6)(5.8×107)=4.37×10−9=6.61×10−5 m. The [skin depth calculator](/science/skin-depth-calculator/) gives it for any metal and frequency.

    Why people get this wrong: Using f in place of ω=2πf makes the answer 2π times too big.

  6. MSQExam level

    Which of these are correct forms of Maxwell's equations in linear matter, written with free charge ρf and free current J→f?
    1. ∇⋅H→=0
    2. ∇×H→=J→f+∂D→∂t
    3. ∇⋅D→=ρf
    4. ∇×E→=−∂B→∂t
    Answer and solution

    Answer: B, C, D

    In matter the source equations use D→ and H→ with free sources only: ∇⋅D→=ρf, ∇×H→=J→f+∂D→/∂t. The other two are unchanged: ∇⋅B→=0 and Faraday's law. ∇⋅H→=−∇⋅M→ is not zero in general.

    Why people get this wrong: It is B→, not H→, that always has zero divergence.

  7. NATHard

    A parallel-plate capacitor has circular plates of radius 5.0 cm. While it charges, the uniform field between the plates grows at 2.0×1012 V m−1 s−1. The magnetic field at the edge of the plates (r=5.0 cm) midway between them is ______ μT (to three decimal places).
    Answer and solution

    Answer: 0.556 $\mu$T (±0.006)

    Ampère-Maxwell on a circle of radius r between the plates: B(2πr)=μ0ϵ0πr2dEdt, so B=μ0ϵ0r2dEdt=r2c2dEdt=(0.05)(2×1012)2(8.99×1016)=5.56×10−7 T.

    Why people get this wrong: Forgetting that only the displacement current inside the circle counts, or dropping the factor 12.

  8. MCQHard

    For a charging capacitor with circular plates of radius R, how does the magnetic field midway between the plates depend on distance r from the axis?
    1. It is uniform for r<R and zero outside.
    2. It is zero everywhere, since no current crosses the gap.
    3. It grows as r for r<R and falls as 1/r for r>R.
    4. It falls as 1/r everywhere, like a wire.
    Answer and solution

    Answer: C

    The displacement current is spread uniformly over the plate area. Inside, the enclosed part grows as r2, so B∝r2/r=r. Outside, all of it is enclosed, so B=μ0I/(2πr), exactly as round the wire feeding the capacitor. It is the field of a thick wire.

    Why people get this wrong: Thinking the field vanishes because no charge crosses the gap.

  9. MSQHard

    A wave in vacuum has E→=E0sin⁡(ky+ωt)zˆ with k,ω>0. Which statements are correct?
    1. It travels along −yˆ.
    2. Its magnetic field oscillates along the x axis.
    3. Its wavelength is 2π/k.
    4. Its phase velocity is ω/k along +yˆ.
    Answer and solution

    Answer: A, B, C

    A crest (ky+ωt constant) moves with dy/dt=−ω/k: along −yˆ, so the last option is wrong. B→ is perpendicular to both E→ (zˆ) and the travel direction (yˆ): along ±xˆ (in fact zˆ×xˆ=yˆ, so B→ is along −xˆ when E→ is along +zˆ, giving E→×B→ along −yˆ). Wavelength 2π/k.

    Why people get this wrong: Reading the direction of travel from the letter in the sine and ignoring the sign of ωt.

  10. NATHard

    Sea water has conductivity 4.0 S/m and relative permittivity 81. At 1.0 MHz, the ratio of conduction current to displacement current amplitude, σ/(ωϵ), is ______ (to the nearest whole number).
    Answer and solution

    Answer: 888 (±9)

    σωϵ=4.0(2π×106)(81)(8.854×10−12)=4.04.506×10−3=888. Much greater than 1, so at 1 MHz sea water is a good conductor and radio waves die within metres. (At optical frequencies the ratio is tiny and water is transparent.)

    Why people get this wrong: Forgetting ϵr=81 and getting a ratio 81 times too large.

  11. MCQHard

    In a good conductor, a plane wave's magnetic field compared with its electric field
    1. is in phase, and B/E=1/c
    2. lags by 45∘ and is much larger than E/c
    3. leads by 90∘
    4. lags by 90∘ and is much smaller than E/c
    Answer and solution

    Answer: B

    In a good conductor the wavenumber is k~=(1+i)/δ, which has phase 45∘. From Faraday, B~=(k~/ω)E~, so B lags E by 45∘ and B/E=2/(ωδ)=σμ0/ω, much bigger than 1/c. The wave is mostly magnetic inside a metal.

    Why people get this wrong: Carrying the vacuum rules (B=E/c, in phase) into a conductor.

  12. NATHard

    A beam of intensity 1000 W/m2 falls on a perfect mirror at 60∘ to the normal. The radiation pressure on the mirror is ______ μPa (to two decimal places).
    Answer and solution

    Answer: 1.67 $\mu$Pa (±0.02)

    Two factors of cos⁡θ: the beam's power is spread over a larger area (Icos⁡θ per unit area of mirror), and only the normal momentum component reverses (2cos⁡θ). P=2Icos2⁡θc=2(1000)(0.25)3.00×108=1.67×10−6 Pa.

    Why people get this wrong: Using just one cos⁡θ (3.33 μPa).

  13. MCQHard

    In a medium with conductivity σ and permittivity ϵ, the ratio of the amplitudes of conduction current density to displacement current density at angular frequency ω is
    1. ωϵ/σ
    2. σϵ/ω
    3. σ/(ωϵ)
    4. σ/ϵ
    Answer and solution

    Answer: C

    With E→∝e−iωt: |J→c|=σE and |J→d|=|ϵ∂E/∂t|=ωϵE. Ratio σ/(ωϵ). It decides whether the medium acts as a conductor (≫1) or as a dielectric (≪1) at that frequency.

    Why people get this wrong: σ/ϵ is a rate (the charge relaxation rate); it must be compared with ω.

  14. NATHard

    A thick glass plate (n=1.5, no absorption) is held normal to a beam of light. Counting all multiple reflections between its two faces, but ignoring interference, the percentage of the incident intensity that gets through is ______ (to one decimal place).
    Answer and solution

    Answer: 92.3 % (±0.2)

    Each face reflects R=0.04. Transmitted beams: (1−R)2[1+R2+R4+…]=(1−R)21−R2=1−R1+R=0.961.04=0.923.

    Why people get this wrong: Stopping at (1−R)2=92.16%; the multiply reflected beams add a little.

  15. MCQHard

    If magnetic monopoles existed, with magnetic charge density ρm and magnetic current density J→m satisfying ∇⋅B→=μ0ρm and their own continuity equation, Faraday's law would have to become (in SI form)
    1. ∇×E→=+μ0J→m−∂B→∂t
    2. ∇×E→=−∂B→∂t, unchanged
    3. ∇×E→=−μ0J→m−∂B→∂t
    4. ∇×E→=−μ0ϵ0J→m−∂B→∂t
    Answer and solution

    Answer: C

    Take the divergence of Faraday's law: the left side is always zero. With ∇×E→=−∂B→∂t+X→, we need 0=−∂∂t(μ0ρm)+∇⋅X→. The magnetic continuity equation ∇⋅J→m=−∂ρm/∂t is satisfied only with X→=−μ0J→m. (Unchanged Faraday would contradict charge conservation for monopoles.)

    Why people get this wrong: Copying the sign of the μ0J→ term from the Ampère-Maxwell law; the consistency check fixes it as negative here.

  16. MCQHard

    Between two mirrors the electric field is E→=E0sin⁡(kx)cos⁡(ωt)jˆ with k=ω/c. The magnetic field is
    1. E0csin⁡(kx)cos⁡(ωt)kˆ
    2. −E0ccos⁡(kx)sin⁡(ωt)kˆ
    3. −E0ccos⁡(kx)sin⁡(ωt)iˆ
    4. E0ccos⁡(kx)cos⁡(ωt)kˆ
    Answer and solution

    Answer: B

    Faraday: ∂B→∂t=−∇×E→. Only (∇×E→)z=∂Ey∂x=E0kcos⁡(kx)cos⁡(ωt) is non-zero. Integrating in time: Bz=−E0kωcos⁡(kx)sin⁡(ωt)=−E0ccos⁡(kx)sin⁡(ωt) (no static part). Note the shifts: B has its nodes where E has antinodes, and it is a quarter period out of step in time.

    Why people get this wrong: Copying the travelling-wave rule B=E/c with the same space and time factors; in a standing wave E and B are out of phase.

  17. MSQHard

    A time-varying electromagnetic field meets the surface of a perfect conductor (fields are zero inside it). Just outside the surface, which statements are correct?
    1. The tangential component of E→ is zero.
    2. The normal component of B→ is zero.
    3. A surface current K→=nˆ×B→/μ0 flows (nˆ pointing out of the conductor).
    4. The tangential component of B→ is zero.
    Answer and solution

    Answer: A, B, C

    Tangential E is continuous, and it is zero inside, so it is zero outside (A). Normal B is continuous (from ∇⋅B→=0), so it is zero outside (B). Tangential B may jump by μ0K; with B→=0 inside, the jump is all of it, so K→=nˆ×B→/μ0 (C) and tangential B is generally not zero (D false); it is what reflects the wave.

    Why people get this wrong: Applying "tangential components are continuous" to B→ when a surface current is present.

  18. NATHard

    A 1.0 mW beam of circularly polarised light of wavelength 600 nm is completely absorbed by a tiny disc. The torque on the disc is ______ ×10−19 N m (two decimal places).
    Answer and solution

    Answer: 3.18 ×10⁻¹⁹ N m (±0.03)

    Each photon carries energy ℏω and, for circular polarisation, angular momentum ℏ along the beam. The beam therefore brings angular momentum at the rate Pω. With ω=2πcλ=3.14×1015 rad/s, the torque is 10−33.14×1015=3.18×10−19 N m.

    Why people get this wrong: Using P/c, which is the force (linear momentum rate), not the torque.

  19. MCQHard

    Which of these is NOT a solution of the one-dimensional wave equation ∂2f∂z2=1c2∂2f∂t2?
    1. (z−ct)3
    2. sin⁡(kz)cos⁡(ckt)
    3. e−(z2−c2t2)
    4. ln⁡(z+ct)
    Answer and solution

    Answer: C

    Any g(z−ct) or h(z+ct) is a solution, which covers the first and last. sin⁡kzcos⁡ckt=12[sin⁡k(z−ct)+sin⁡k(z+ct)] is a sum of two such waves (a standing wave). But e−(z2−c2t2) is a product e−(z−ct)(z+ct), not a sum: direct check gives fzz−ftt/c2=(4z2−4−4c2t2)f≠0.

    Why people get this wrong: Thinking any function of z and ct that looks symmetric works; it must split into right- and left-moving parts.

  20. MSQHard

    Light inside glass is totally internally reflected at a flat glass-air boundary. Which statements are true?
    1. There is an electric field in the air just beyond the boundary, decaying exponentially with distance
    2. The time-averaged Poynting vector across the boundary (normal component) is zero
    3. All of the incident power is reflected
    4. The decay length of the field in the air does not depend on the angle of incidence
    Answer and solution

    Answer: A, B, C

    The boundary conditions cannot be met with fields that vanish in the air, so an evanescent wave exists there, with e−κz and κ=k0n2sin2⁡θ−1, which grows with the angle (so the decay length does depend on it). Its fields are 90∘ out of phase in a way that gives no average energy flow across the boundary, so the reflectance is exactly 1. (Bringing a second glass block within a wavelength lets energy tunnel across: frustrated TIR.)

    Why people get this wrong: Thinking "total" reflection means no field at all on the far side.

  21. NATTop rank

    The ionosphere has a free-electron density of 1.0×1012 m−3. Waves below its plasma frequency are reflected. That plasma frequency fp=ωp/2π is ______ MHz (to two decimal places).
    Answer and solution

    Answer: 8.98 MHz (±0.05)

    ωp=ne2ϵ0me=(1012)(1.602×10−19)2(8.854×10−12)(9.109×10−31)=5.64×107 rad/s, so fp=8.98 MHz. The dispersion relation ω2=ωp2+c2k2 gives imaginary k below ωp: shortwave radio bounces, FM (100 MHz) passes through to space.

    Why people get this wrong: Giving ωp in rad/s (56.4 M) as if it were the frequency in hertz.

  22. MSQTop rank

    Which statements follow from Maxwell's equations?
    1. In vacuum all electromagnetic waves travel at the same speed, whatever their frequency.
    2. The speed of light in vacuum depends on how fast the source moves.
    3. In a uniform linear dielectric with no free charge, ∇⋅E→=0.
    4. In a good conductor, the electric and magnetic fields of a plane wave are in phase.
    Answer and solution

    Answer: A, C

    The vacuum wave equation has speed 1/μ0ϵ0 with no frequency in it: no dispersion. That speed contains no reference to the source, the clash with Galilean relativity that led to Einstein's postulate (the equations alone do not say "for every observer", but they give no source-speed dependence). With D→=ϵE→, ϵ uniform and ρf=0, ∇⋅E→=0. In a good conductor B→ lags E→ by 45∘.

    Why people get this wrong: Dispersion in glass comes from the frequency dependence of ϵ, not from the vacuum equations.

  23. MCQTop rank

    A parallel-plate capacitor with circular plates is being charged slowly. Where does the energy that builds up between the plates enter the gap?
    1. Along the connecting wires, then across the gap from plate to plate
    2. Through the edge of the gap (the open cylindrical side), flowing radially inward
    3. It is created inside the gap by the displacement current
    4. Through the back faces of the plates
    Answer and solution

    Answer: B

    Between the plates E→ is axial and growing, and the displacement current makes a circling B→. S→=E→×B→/μ0 points radially inward. At the edge (r=R), S⋅2πRd=Eμ0⋅μ0ϵ0R2E˙⋅2πRd=ddt(12ϵ0E2⋅πR2d): exactly the rate at which the stored energy grows.

    Why people get this wrong: Picturing energy flowing inside the wires like water. It flows through the space around them.

  24. NATTop rank

    Light polarised perpendicular to the plane of incidence (s-polarised) falls from air on glass (n=1.5) at Brewster's angle. The percentage of its intensity that is reflected is ______ (to one decimal place).
    Answer and solution

    Answer: 14.8 % (±0.2)

    Fresnel: rs=−sin⁡(θi−θt)sin⁡(θi+θt). At Brewster, θi=tan−1⁡1.5=56.31∘ and θi+θt=90∘, so θt=33.69∘ and rs=−sin⁡22.62∘=−0.3846. Rs=0.148, i.e. 14.8%. The p component is not reflected at all, so unpolarised light reflects 7.4% of its intensity, all s-polarised.

    Why people get this wrong: Thinking nothing is reflected at Brewster's angle: only the p component vanishes.

  25. NATTop rank

    A flat, perfectly reflecting solar sail faces the Sun. Its mass per unit area is chosen so that radiation pressure exactly balances the Sun's gravity. Using the Sun's luminosity 3.83×1026 W, mass 1.99×1030 kg and G=6.67×10−11 N m2 kg−2, that mass per unit area is ______ g/m2 (to two decimal places).
    Answer and solution

    Answer: 1.53 g/m$^2$ (±0.02)

    At distance r, intensity I=L/4πr2, and a perfect reflector feels pressure 2I/c. Balance for area A and mass σA: 2L4πr2cA=GMσAr2. Both forces fall as 1/r2, so r cancels: σ=2L4πcGM=7.66×10264π(3.0×108)(6.67×10−11)(1.99×1030)=1.53×10−3 kg/m2.

    Why people get this wrong: Expecting the answer to depend on the distance from the Sun; both forces follow the inverse square law.

  26. NATTop rank

    In copper (σ=5.8×107 S/m, μ≈μ0) a 1.0 MHz wave travels inside the metal with phase speed ______ m/s (to the nearest whole number).
    Answer and solution

    Answer: 415 m/s (±3)

    In a good conductor k=(1+i)/δ with δ=2ωμσ, so the real part of k is 1/δ and the phase speed is v=ωRek=ωδ. Here ω=6.28×106 s⁻¹ and δ=26.28×106×1.257×10−6×5.8×107=66.1 μm. So v=6.28×106×6.61×10−5=415 m/s, only a little faster than sound in air, and the wavelength inside is only 2πδ=0.42 mm.

    Why people get this wrong: Assuming the wave still moves at c (or c/n) inside the metal.

  27. MSQTop rank

    Which statements about the structure of Maxwell's equations are true?
    1. Without the displacement term, the divergence of Ampère's law would force ∇⋅J→=0, which fails for a charging capacitor
    2. If ∇⋅B→=0 holds at one instant, Faraday's law keeps it true at all later times
    3. In empty space the equations are unchanged by E→→cB→, B→→−E→/c
    4. The displacement current is a flow of charge across the gap of a charging capacitor
    Answer and solution

    Answer: A, B, C

    The divergence of a curl is zero, so ∇⋅(∇×B→)=μ0∇⋅J→ would require ∇⋅J→=0; adding μ0ε0∂tE→ makes it consistent with the continuity equation. Taking the divergence of Faraday's law gives ∂t(∇⋅B→)=0. In vacuum, substituting the duality map turns Faraday's law into the Ampère-Maxwell law and back, and swaps the two Gauss laws. The displacement current is a changing electric field, not moving charge.

    Why people get this wrong: Picturing the displacement current as charge leaking across the gap.

← All topics · Timed mock test →