Home / Courses / GATE Physics / Practice / Fluids: surface tension, viscosity and Bernoulli

Fluids: surface tension, viscosity and Bernoulli

Mechanics and properties of matter · 4 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQHard

    Which statements about Bernoulli's equation p+12ρv2+ρgz= constant are true?
    1. It holds along a streamline in steady, incompressible, non-viscous flow
    2. In irrotational flow of that kind, the constant is the same on every streamline
    3. It can be used unchanged for viscous flow in a long, thin pipe
    4. In a level pipe, the pressure is lower where the speed is higher
    Answer and solution

    Answer: A, B, D

    Integrating Euler's equation along a streamline gives Bernoulli for steady, incompressible, inviscid flow; if the flow is also irrotational, the constant is the same everywhere. In a long thin pipe viscosity causes a steady pressure drop with no change in speed (Poiseuille), which Bernoulli cannot describe. At constant height a higher speed means lower pressure (the Venturi effect).

    Why people get this wrong: Applying Bernoulli across a pipe with friction: the pressure falls along the pipe although v is constant.

  2. MSQTop rank

    For steady laminar flow of a liquid (viscosity η) through a round pipe of radius R and length L under pressure difference Δp, which statements are correct?
    1. The speed at distance s from the axis is Δp4ηL(R2−s2).
    2. The viscous shear stress is largest at the wall.
    3. The average speed is half the speed on the axis.
    4. The volume flow rate is proportional to R2.
    Answer and solution

    Answer: A, B, C

    Force balance on a cylinder of radius s: Δpπs2=−ηdvds2πsL, so dv/ds=−Δps/(2ηL). Integrating with v(R)=0 gives the parabola (true). Shear stress η|dv/ds|∝s, largest at the wall (true). Average =vmax⁡/2 (true). Q=πR2⋅vmax⁡/2=πΔpR4/(8ηL)∝R4 (fourth false).
  3. NATTop rank

    A conical funnel-shaped tank stands with its apex down (half-angle 45∘) and holds water to a height of 1.0 m above the apex. It drains through a small hole of area 1.0 cm² at the apex, with Torricelli's law for the outflow speed. It empties in ______ minutes (g=9.8 m/s², one decimal place).
    Answer and solution

    Answer: 47.3 min (±0.3)

    At height h the surface has radius htan⁡45∘=h and area πh2. Volume balance: −πh2dh=a2ghdt, so dt=−πh3/2a2gdh. Integrating from H to 0: t=2πH5/25a2g=2π5×10−4×4.427=2838 s =47.3 min.

    Why people get this wrong: A straight-sided tank gives t∝H1/2; here the surface area shrinks as it drains, giving H5/2.

← All topics · Timed mock test →