Home / Courses / GATE Physics / Practice / The degenerate Fermi gas

The degenerate Fermi gas

Statistical physics · 85 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: The Fermi gas.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    For an ideal gas of spin-1/2 fermions of mass m and number density n, the Fermi energy is
    1. ℏ22m(3π2n)2/3
    2. ℏ22m(6π2n)2/3
    3. ℏ22m(3π2n)1/3
    4. ℏ2m(3π2n)2/3
    Answer and solution

    Answer: A

    Fill a sphere in k-space: N=2⋅V(2π)3⋅43πkF3, so kF=(3π2n)1/3 and EF=ℏ2kF2/2m. 6π2 is for spinless fermions.
  2. MCQWarm-up

    At T=0, the average kinetic energy per particle of an ideal 3D Fermi gas is
    1. 12EF
    2. EF
    3. 35EF
    4. 32kT
    Answer and solution

    Answer: C

    ⟨E⟩=∫0EFEEdE/∫0EFEdE=EF5/2/(5/2)EF3/2/(3/2)=35EF. Most states are near the top of the sphere.
  3. MCQWarm-up

    If the number density of an ideal Fermi gas is increased 8 times, its Fermi energy
    1. doubles
    2. rises 8 times
    3. rises 4 times
    4. stays the same
    Answer and solution

    Answer: C

    EF∝n2/3, so 82/3=4.
  4. MCQWarm-up

    An ideal Fermi gas exerts a pressure even at absolute zero. The reason is
    1. zero-point vibrations of the walls
    2. the Pauli principle forces particles into states of high momentum
    3. thermal motion that never stops
    4. electrostatic repulsion between the particles
    Answer and solution

    Answer: B

    Only one fermion per state, so even the ground state has particles up to momentum ℏkF. Squeezing raises all those energies, EF∝V−2/3, so P=−∂E0/∂V=25nEF>0. This degeneracy pressure holds up white dwarfs.
  5. MCQWarm-up

    At temperatures far below TF, the electronic heat capacity of a metal varies with temperature as
    1. T3
    2. constant (32Nk)
    3. e−TF/T
    4. T
    Answer and solution

    Answer: D

    Only electrons within about kT of EF can be excited; there are ∼N(T/TF) of them, each gaining ∼kT. So U−U0∝NkT2/TF and C=π22NkTTF: linear in T.
  6. MSQWarm-up

    For an ideal Fermi gas at T=0, which statements are correct?
    1. Every state with energy below EF is filled and every state above is empty
    2. The chemical potential equals EF
    3. The entropy is zero
    4. The pressure is zero
    Answer and solution

    Answer: A, B, C

    The occupation is a step at μ=EF; there is exactly one way to arrange the particles, so S=0. The pressure is 25nEF, not zero.
  7. MCQWarm-up

    In an ideal three-dimensional Fermi gas at T=0, the occupied single-particle states fill a region of wave-vector space that is
    1. a solid sphere of radius kF centred on k=0
    2. a thin spherical shell at kF
    3. a cube, set by the box's shape
    4. a single point at k=0
    Answer and solution

    Answer: A

    The energy ℏ2k2/2m depends only on |k|, and at T=0 the particles fill the lowest energies first, two per allowed k point (spin up and down), up to EF. All points with |k|<kF are filled: a solid Fermi sphere. The box shape only sets the spacing of the k points. A thin shell at kF is where the action is at low T, but the sphere is full.

    Why people get this wrong: All fermions in the lowest state is the boson picture; Pauli forbids it.

  8. NATStandard

    Copper has 8.47×1028 conduction electrons per m3. Treating them as a free electron gas, EF is ______ eV.
    Answer and solution

    Answer: 7.03 eV (±0.07)

    kF=(3π2×8.47×1028)1/3=1.359×1010 m−1. EF=ℏ2kF2/2m=(1.4327×10−24)2/(1.822×10−30)=1.127×10−18 J =7.03 eV.
  9. NATStandard

    The Fermi temperature TF=EF/k of copper (EF=7.03 eV) is ______ ×104 K.
    Answer and solution

    Answer: 8.16 (±0.08)

    TF=7.03/8.617×10−5=8.16×104 K. Room temperature is 0.4% of it: the electron gas is deeply degenerate.
  10. NATStandard

    The Fermi velocity vF=ℏkF/m of electrons in copper (kF=1.36×1010 m−1) is ______ ×106 m/s.
    Answer and solution

    Answer: 1.57 (±0.02)

    vF=1.0546×10−34×1.36×1010/9.109×10−31=1.57×106 m/s, about 0.5% of c, and far above the thermal speed 3kT/m≈1.2×105 m/s.
  11. MCQStandard

    The radius of the Fermi sphere for spin-1/2 fermions at number density n is
    1. (π2n)1/3
    2. (6π2n)1/3
    3. (3π2n)2/3
    4. (3π2n)1/3
    Answer and solution

    Answer: D

    V(2π)3⋅43πkF3⋅2=N gives kF3=3π2n. The interparticle spacing is ∼1/kF.
  12. MCQStandard

    For an ideal 3D Fermi gas of N particles, the density of states at the Fermi energy is
    1. N/EF
    2. 3N/2EF
    3. 2N/3EF
    4. 3N/5EF
    Answer and solution

    Answer: B

    N(E)=N(E/EF)3/2 counts states below E; differentiate: g(EF)=32N/EF. This one number fixes Cel, the Pauli susceptibility and the screening length.
  13. NATStandard

    A metal is compressed so that its electron density doubles. Its Fermi energy rises by a factor of ______.
    Answer and solution

    Answer: 1.587 (±0.003)

    EF∝n2/3: 22/3=1.587.
  14. MCQStandard

    The pressure of an ideal non-relativistic Fermi gas at T=0 is
    1. 35nEF
    2. 23nEF
    3. 25nEF
    4. nEF
    Answer and solution

    Answer: C

    E0=35NEF∝V−2/3, so P=−∂E0/∂V=23E0/V=23⋅35nEF=25nEF.
  15. NATStandard

    Using P=25nEF, the degeneracy pressure of the conduction electrons of copper (n=8.47×1028 m−3, EF=7.03 eV) is ______ ×1010 Pa.
    Answer and solution

    Answer: 3.82 (±0.04)

    P=0.4×8.47×1028×7.03×1.602×10−19=3.82×1010 Pa, about 380 000 atm. The positive ions hold it in.
  16. MCQStandard

    At the same density and mass, how does the Fermi energy of spinless fermions compare with that of spin-1/2 fermions?
    1. It is 22/3 times larger
    2. It is the same
    3. It is half as large
    4. It is twice as large
    Answer and solution

    Answer: A

    With one state per k instead of two, the sphere must hold N in half the "seats": kF3 doubles, so EF∝kF2 grows by 22/3=1.59.
  17. MCQStandard

    For an ideal two-dimensional gas of spin-1/2 fermions with areal density ns, the Fermi energy is
    1. ℏ22m(3π2ns)2/3
    2. πℏ2nsm
    3. 2πℏ2nsm
    4. ℏ2ns2m
    Answer and solution

    Answer: B

    N=2⋅A(2π)2πkF2 gives kF2=2πns and EF=ℏ2kF2/2m=πℏ2ns/m, linear in density (constant density of states).
  18. NATStandard

    Roughly what fraction of the conduction electrons in copper (TF=8.16×104 K) can be thermally excited at 300 K? Give T/TF in units of 10−3.
    Answer and solution

    Answer: 3.68 (±0.04)

    Only electrons within ∼kT of EF have empty states nearby: a fraction ∼kT/EF=T/TF=300/81600=3.68×10−3. This is why electrons add so little to CV (Drude’s puzzle).
  19. MCQStandard

    Liquid 3He (n≈1.6×1028 m−3, atomic mass 3 u) has a Fermi temperature of about
    1. 0.005 K
    2. 5 K
    3. 500 K
    4. 5×104 K
    Answer and solution

    Answer: B

    TF=ℏ2(3π2n)2/3/2mk. Compared with electrons in a metal, the density is about 5 times lower and the mass 5500 times higher, giving TF≈5 K. Below about 1 K liquid 3He is a degenerate Fermi liquid with C∝T.
  20. MSQStandard

    Which of the following raise the Fermi energy of an ideal 3D Fermi gas?
    1. Increasing the number density
    2. Using lighter particles
    3. Raising the temperature at fixed density
    4. Removing the spin degeneracy (spinless fermions at the same density)
    Answer and solution

    Answer: A, B, D

    EF=ℏ22m(6π2n/g)2/3 grows with n, falls with m, and grows when g drops from 2 to 1. It is defined at T=0, so temperature does not enter (the chemical potential shifts instead).
  21. NATStandard

    Aluminium has a Fermi energy of 11.7 eV and 6.02×1028 atoms per m3. Using the free-electron relation EF=ℏ22m(3π2n)2/3, the number of conduction electrons per atom, to the nearest whole number, is ______.
    Answer and solution

    Answer: 3

    Invert: n=(2mEF)3/23π2ℏ3. 2mEF=2×9.11×10−31×11.7×1.602×10−19=3.41×10−48; its 3/2 power is 6.31×10−72; 3π2ℏ3=29.6×1.173×10−102=3.47×10−101. So n=1.82×1029 m−3, and 1.82×1029/6.02×1028=3.0: aluminium gives three electrons per atom, as its valence suggests.

    Why people get this wrong: Forgetting the spin factor (using 6π2) gives half the density, about 1.5 per atom.

  22. NATExam level

    Using Cel=π22NkTTF, the electronic heat capacity of copper (TF=8.16×104 K) at 300 K, in units of Nk, is ______.
    Answer and solution

    Answer: 0.0181 (±0.0003)

    C/Nk=4.935×3.68×10−3=0.0181, about 1% of the classical 32.
  23. NATExam level

    From the Sommerfeld expansion, μ=EF[1−π212(T/TF)2]. At T=0.1TF, μ/EF is ______.
    Answer and solution

    Answer: 0.9918 (±0.0002)

    1−0.8225×0.01=0.9918. The shift is tiny and quadratic; for a metal at room temperature it is about 10−5.
  24. MCQExam level

    Why does the chemical potential of a 3D electron gas fall slightly as T rises from zero?
    1. Because electrons are lost to the lattice
    2. Because the density of states rises with energy, so keeping N fixed needs a lower μ
    3. Because EF itself falls with T
    4. Because the Fermi function is not symmetric about μ
    Answer and solution

    Answer: B

    Smearing moves electrons from just below μ to just above. Since g(E)∝E is larger above, more states would be filled above than emptied below; μ must drop to conserve N. The Fermi function itself is symmetric about μ.
  25. MCQExam level

    The spin (Pauli) paramagnetic susceptibility of a degenerate electron gas is
    1. proportional to 1/T, like Curie’s law
    2. proportional to g(EF) and nearly independent of T
    3. negative
    4. proportional to T
    Answer and solution

    Answer: B

    A field shifts up and down spin bands by ∓μBB; only electrons within μBB of EF flip, about g(EF)μBB of them. So M=μB2g(EF)B/V and χ=μ0μB2g(EF)/V=32μ0nμB2/EF, temperature independent. The diamagnetic Landau term is −13 of it.
  26. NATExam level

    Using χ=32μ0nμB2/EF, the Pauli susceptibility of sodium (n=2.65×1028 m−3, EF=3.24 eV) is ______ ×10−6 (SI, dimensionless).
    Answer and solution

    Answer: 8.27 (±0.09)

    μ0μB2=1.2566×10−6×(9.274×10−24)2=1.081×10−52 (SI units). χ=1.5×1.081×10−52×2.65×1028/(5.19×10−19)=8.27×10−6, small and temperature independent.
  27. MSQExam level

    An ideal Fermi gas and a classical ideal gas have the same density. At T→0, which statements are correct for the Fermi gas?
    1. Its energy stays finite, 35NEF
    2. Its pressure stays finite
    3. Its heat capacity vanishes linearly in T
    4. Its entropy approaches Nkln⁡2
    Answer and solution

    Answer: A, B, C

    The Fermi sea keeps energy 35NEF and pressure 25nEF; C and S both go as π22NkT/TF→0. The classical gas would have U,P→0.
  28. NATExam level

    The bulk modulus of an ideal Fermi gas at T=0 is B=−V∂P/∂V=23nEF. For the electrons of sodium (n=2.65×1028 m−3, EF=3.24 eV) it is ______ GPa.
    Answer and solution

    Answer: 9.17 GPa (±0.1)

    P∝n5/3, so B=53P=23nEF=23×2.65×1028×5.19×10−19=9.17×109 Pa. The measured value, 6.3 GPa, is of the same size: alkali metals are soft because their electron gas is.
  29. NATExam level

    Treat liquid 3He (n=1.635×1028 m−3, m=5.008×10−27 kg, spin 1/2) as an ideal Fermi gas. Its Fermi temperature is ______ K.
    Answer and solution

    Answer: 4.96 K (±0.06)

    kF=(3π2×1.635×1028)1/3=7.85×109 m−1. EF=ℏ2kF2/2m=(8.28×10−25)2/(1.0016×10−26)=6.85×10−23 J, so TF=4.96 K. (Interactions raise the effective mass about 3 times, lowering TF.)
  30. MCQExam level

    The low-temperature heat capacity of a metal is C=γT+βT3. The best way to separate γ and β from data is to plot
    1. C against T
    2. ln⁡C against ln⁡T
    3. C/T against T2: a straight line with intercept γ and slope β
    4. C against 1/T
    Answer and solution

    Answer: C

    C/T=γ+βT2 is linear in T2. The intercept gives the electronic γ=π23k2g(EF)/V, hence the density of states (or effective mass); the slope gives the Debye temperature.

← All topics · Timed mock test →