Home / Courses / GATE Physics / Practice / Conductors, Laplace's equation and images

Conductors, Laplace's equation and images

Electricity and magnetism · 51 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQStandard

    A charge q is at height d above a grounded conducting plane. The induced surface charge density on the plane directly below the charge is
    1. −q4πd2
    2. −q2πd2
    3. −qπd2
    4. −q2πϵ0d2
    Answer and solution

    Answer: B

    Just above the plane, q and its image each give a field of magnitude kq/d2 at the foot point, both pointing down (towards the plane): E=2kq/d2=q2πϵ0d2 downward. At a conductor σ=ϵ0En with En the outward normal component: σ=−q2πd2.

    Why people get this wrong: Forgetting the image doubles the field (giving −q/4πd2), or leaving ϵ0 in: σ has units of C/m2, so ϵ0 cancels.

  2. NATStandard

    A charge of 1.0 nC is brought slowly from very far away to a point 5.0 cm above a large grounded metal plate. The work done by the external agent is ______ nJ (to one decimal place, with sign).
    Answer and solution

    Answer: -44.9 nJ (±0.5)

    The force on the charge at height z is the image attraction F=kq24z2 towards the plate, so the agent must hold it back with +kq2/4z2 (upward) while it moves down. The agent's force points up while the charge moves down, so the agent does negative work: W=−∫d∞kq24z2dz=−kq24d. Numbers: −(8.99×109)(10−18)0.20=−4.49×10−8 J =−44.9 nJ.

    Why people get this wrong: Using the energy of two real charges, −kq2/(2d). The image moves as the charge moves and only the upper half-space holds field energy, so the true work is half of that.

  3. MCQStandard

    In a region bounded by a closed surface, the electrostatic potential is fixed uniquely if we are given
    1. the charge density inside, and nothing about the boundary
    2. the field at one point inside
    3. the charge density inside and the potential on the whole boundary
    4. the total charge inside
    Answer and solution

    Answer: C

    This is the first uniqueness theorem: if two potentials V1,V2 obey the same Poisson equation inside and agree on the boundary, their difference obeys Laplace's equation and is zero on the boundary, so (having no maximum or minimum inside) it is zero everywhere. The second theorem replaces boundary values by the total charge on each conductor.

    Why people get this wrong: Total charge alone is not enough: the same charge can be arranged in endless ways giving different fields.

  4. MSQStandard

    Which of these functions could be the electrostatic potential in a charge-free region of the xy plane (no dependence on z)?
    1. x2−y2
    2. x2+y2
    3. xy
    4. excos⁡y
    Answer and solution

    Answer: A, C, D

    Check ∂2V/∂x2+∂2V/∂y2. x2−y2: 2−2=0. x2+y2: 2+2=4≠0 (it needs a uniform charge density). xy: 0+0=0. excos⁡y: excos⁡y−excos⁡y=0. So three of the four are harmonic.

    Why people get this wrong: x2+y2 looks the most "symmetric", but a bowl-shaped potential has a minimum, which Laplace's equation forbids.

  5. MCQStandard

    In a charge-free region, the potential at the centre of any sphere lying wholly in the region equals
    1. the average of the potential over the sphere's surface
    2. the largest value of the potential on the surface
    3. zero
    4. the potential at the point of the surface nearest to the nearest charge
    Answer and solution

    Answer: A

    This is the mean value property of solutions of Laplace's equation. It follows from the fact that a point charge q outside a sphere has an average potential over the sphere equal to kq/d, its value at the centre; superposition extends this to any outside charges. A consequence: V cannot have a maximum or minimum inside the region.

    Why people get this wrong: The mean is over the surface, not over the volume (though the volume average gives the same answer too).

  6. NATStandard

    A point charge of +6 nC is 30 cm from the centre of a grounded conducting sphere of radius 10 cm. The image charge that reproduces the field outside the sphere is ______ nC.
    Answer and solution

    Answer: -2 nC

    For a grounded sphere of radius R and an outside charge q at distance d from the centre, the image is q′=−qR/d, placed on the line to q at distance R2/d from the centre. Here q′=−6×10/30=−2 nC.

    Why people get this wrong: Using −q (the plane rule). A sphere only needs a smaller image, because it is smaller than the charge's distance.

  7. NATStandard

    For the grounded sphere of radius 10 cm with a point charge 30 cm from its centre, the image charge sits ______ cm from the centre of the sphere (to two decimal places).
    Answer and solution

    Answer: 3.33 cm (±0.02)

    The image lies inside the sphere on the line joining the centre to the charge, at b=R2/d=100/30=3.33 cm from the centre. Check: a surface point at angle θ is at distances r1 from q and r2 from q′ with r2/r1=R/d everywhere, so kq/r1+kq′/r2=0.

    Why people get this wrong: Putting the image at d/R or R/d (not even a length). The rule is R2/d, always inside the sphere.

  8. NATExam level

    Two grounded conducting half-planes meet along a line at an angle of 60∘, and a point charge is placed between them. The number of image charges needed to find the field in the wedge is ______.
    Answer and solution

    Answer: 5

    Reflecting repeatedly in the two planes generates charges at the corners of a pattern with 360∘/60∘=6 sectors, one charge per sector. One of these is the real charge, so 6−1=5 images, with alternating signs round the circle. The method closes exactly only when 360∘/θ is an even integer, as it is here.

    Why people get this wrong: Answering 6 (counting the real charge) or 3 (reflections in each plane only once each plus their combination, which is the right count only for 90∘).

  9. MCQExam level

    Two grounded conducting planes, x=0 and y=0, form a right-angled corner. A charge q is at (a,a,0). The force on it has magnitude (k=1/4πϵ0)
    1. (22−1)kq28a2, towards the corner
    2. (22+1)kq28a2, towards the corner
    3. kq24a2, towards the corner
    4. 2kq24a2, away from the corner
    Answer and solution

    Answer: A

    Images: −q at (−a,a), −q at (a,−a), +q at (−a,−a). The first pulls along −x with kq2/4a2; the second along −y with kq2/4a2; together 2kq2/4a2 towards the corner. The third is 22a away and repels with kq2/8a2 along the diagonal, away from the corner. Net: 2kq24a2−kq28a2=(22−1)kq28a2 towards the corner.

    Why people get this wrong: Giving the positive image the wrong sign (adding instead of subtracting), or forgetting it altogether.

  10. MSQExam level

    An uncharged conducting sphere of radius R is placed in a uniform field E0zˆ. Which statements are correct? (θ is measured from the +z axis.)
    1. The induced surface charge density is 3ϵ0E0cos⁡θ.
    2. Outside, the sphere's own contribution is the field of a dipole of moment 4πϵ0R3E0.
    3. The field inside the sphere is zero.
    4. The sphere acquires a net induced charge.
    Answer and solution

    Answer: A, B, C

    Solving Laplace's equation with V=0 on the sphere and V→−E0rcos⁡θ far away gives V=−E0(r−R3r2)cos⁡θ. The second term is a dipole potential pcos⁡θ4πϵ0r2 with p=4πϵ0R3E0. Then σ=−ϵ0∂V/∂r|R=ϵ0E0(1+2)cos⁡θ=3ϵ0E0cos⁡θ. Integrating cos⁡θ over the sphere gives zero, so no net charge: it only separates. The inside is metal, so E=0 there.

    Why people get this wrong: Taking σ=ϵ0E0cos⁡θ, as if the sphere did not disturb the field. Its induced dipole adds 2E0 at the poles, so the normal field there is 3E0.

  11. NATExam level

    A neutral metal ball is placed in a uniform field of 1.0 kV/m. The largest surface charge density induced on it is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 26.6 nC/m$^2$ (±0.3)

    For a conducting sphere in a uniform field, σ=3ϵ0E0cos⁡θ, largest at the poles: σmax⁡=3(8.854×10−12)(1000)=2.66×10−8 C/m2 =26.6 nC/m2. Notice it does not depend on the radius.

    Why people get this wrong: Using ϵ0E0, which ignores how the ball bends the field lines towards itself (the field at the poles is 3E0).

  12. MCQExam level

    A long slot has grounded walls at y=0 and y=a; the end at x=0 is held at a fixed potential and the slot runs to x→∞. Far from the end, the potential dies away like e−x/ℓ with ℓ equal to
    1. a
    2. a/π
    3. πa
    4. a/2
    Answer and solution

    Answer: B

    Separating variables, V=∑nCne−nπx/asin⁡(nπy/a); the sine must vanish at y=0 and y=a, which forces k=nπ/a, and Laplace's equation then requires the x part to grow or decay at the same rate k. Far away only the slowest term n=1 survives, decaying with length a/π.

    Why people get this wrong: Guessing the decay length is the slot width a. The potential actually dies away about three times faster.

  13. NATExam level

    For the same slot (grounded walls at y=0 and y=a, end x=0 held at V0=100 V), the solution is V=∑n odd4V0nπe−nπx/asin⁡nπya. The potential at x=a, y=a/2 is ______ V (to two decimal places).
    Answer and solution

    Answer: 5.5 V (±0.03)

    At x=a the nth term carries e−nπ, so the series converges very fast. n=1: 400πe−πsin⁡π2=127.32×0.04321=5.502 V. n=3: 4003πe−3πsin⁡3π2=−0.0034 V. Total ≈5.50 V.

    Why people get this wrong: Expecting something like 50 V. One slot width from the end, only about 5% of the end potential is left.

  14. MSQExam level

    A point charge q is at distance d from the centre of a conducting sphere of radius R<d. Which statements are correct?
    1. If the sphere is grounded, the charge induced on it is −qR/d.
    2. If the sphere is grounded, the force on q is attractive at every distance.
    3. If the sphere is isolated and neutral, its field outside is given by the grounded-sphere image plus a charge +qR/d at the centre.
    4. If the sphere is isolated and neutral, the force on q is zero because the sphere carries no net charge.
    Answer and solution

    Answer: A, B, C

    For a grounded sphere the image −qR/d at R2/d makes the surface V=0; Gauss's law shows the sphere holds exactly the image charge, and q is pulled towards it. To make it isolated and neutral, add +qR/d at the centre: this keeps the surface an equipotential and brings the total to zero. The force is still attractive, because the negative image is nearer to q than the positive one.

    Why people get this wrong: A neutral conductor still attracts a charge, as a charged comb attracts paper: induced charges of opposite sign sit nearer.

  15. MCQExam level

    A neutral metal sphere (outer surface spherical) has a small off-centre cavity containing a point charge q. The charge on the outer surface of the sphere is
    1. +q, crowded on the side nearer the cavity
    2. zero, because the metal screens the cavity
    3. +q, spread non-uniformly in a way that depends on the cavity's shape
    4. +q, spread uniformly over the outer surface
    Answer and solution

    Answer: D

    The inner surface carries −q, arranged to cancel the field of q everywhere in the metal. The outer surface then holds +q. The metal screens the outer surface from whatever happens inside, so the outer charge arranges itself as it would on an isolated sphere with charge q: uniformly. Outside, the field is kq/r2 from the sphere's centre, not from the charge.

    Why people get this wrong: Expecting the outside to "know" where the charge is. It cannot: the field in the metal is zero, so nothing about the cavity reaches the outer surface except the total charge.

  16. NATExam level

    A long straight wire carrying 10 nC/m runs parallel to a large grounded metal plate, 5.0 cm above it. The force per unit length on the wire is ______ μN/m (to one decimal place).
    Answer and solution

    Answer: 18 $\mu$N/m (±0.2)

    The image is a line charge −λ at 5.0 cm below the plate, 2d=0.10 m from the wire. Its field at the wire is λ2πϵ0(2d), so the force per length is λ24πϵ0d=kλ2d=(8.99×109)(10−8)20.05=1.80×10−5 N/m =18.0μN/m.

    Why people get this wrong: Using the point-charge law 1/r2. A line charge's field falls as 1/r.

  17. MCQExam level

    A hollow metal cube is made of six plates insulated from each other. One plate is held at V0 and the other five are earthed. The potential at the centre of the cube is
    1. V0/4
    2. V0/8
    3. V0/2
    4. V0/6
    Answer and solution

    Answer: D

    Imagine six such problems, each with a different face at V0 and the rest earthed. Adding their solutions gives a solution of Laplace's equation with all six faces at V0, which by uniqueness is V=V0 everywhere inside. By symmetry each of the six problems contributes the same amount at the centre, so each gives V0/6.

    Why people get this wrong: V0/4 is the answer for a long square tube with one side held at V0 (four sides), not for a cube.

  18. MCQExam level

    A point charge q is held at distance d from the centre of an isolated, uncharged metal sphere of radius R<d. The potential of the sphere (zero at infinity) is
    1. q4πϵ0d
    2. qR4πϵ0d2
    3. zero, since the sphere is uncharged
    4. q4πϵ0(d−R)
    Answer and solution

    Answer: A

    Quick route: the potential at the centre equals the sphere's potential (the whole conductor is one equipotential). The induced charges total zero and all sit at distance R from the centre, so together they add 14πϵ0R×0=0 there. Only q counts: V=q4πϵ0d. (Images agree: −qR/d at R2/d makes the sphere zero, and +qR/d at the centre restores neutrality and raises it by q/(4πϵ0d).)

    Why people get this wrong: Zero charge does not mean zero potential; that holds for an earthed sphere, which then carries −qR/d.

  19. NATHard

    A charge q is at height d above a grounded conducting plane. The percentage of the total induced charge that lies within a distance d of the point directly below the charge is ______ (to one decimal place).
    Answer and solution

    Answer: 29.3 % (±0.3)

    With σ(r)=−qd2π(r2+d2)3/2, the charge within radius r is ∫0rσ2πr′dr′=−qd[1d−1r2+d2]=−q(1−dr2+d2). At r=d: 1−1/2=0.293, so 29.3%.

    Why people get this wrong: Expecting most of the charge to be right under the charge. The density falls only as 1/r3, so the tail far out holds most of it.

  20. MCQHard

    A charge q sits at height d above a grounded conducting plane. Half of the induced charge lies within a circle (centred directly below q) of radius
    1. d
    2. 2d
    3. 3d
    4. 2d
    Answer and solution

    Answer: C

    The charge within radius r is −q(1−dr2+d2). Setting the bracket to 12: r2+d2=2d, so r=3d.

    Why people get this wrong: Solving d/r2+d2=1/2 (half the density squared, not half the charge) gives r=d.

  21. MCQHard

    The potential on a spherical surface of radius R is held at V0cos⁡θ, and there is no charge outside it. For r>R the potential is
    1. V0Rrcos⁡θ
    2. V0R2r2cos⁡θ
    3. V0rRcos⁡θ
    4. V0R3r3cos⁡θ
    Answer and solution

    Answer: B

    Axially symmetric solutions of Laplace's equation are (Alrl+Bl/rl+1)Pl(cos⁡θ). The boundary data is pure P1=cos⁡θ, so only l=1 appears. Outside, it must vanish at infinity, so V=B1cos⁡θ/r2; matching at r=R gives B1=V0R2.

    Why people get this wrong: R/r is the l=0 (point charge) fall-off; a cos⁡θ pattern is a dipole and falls as 1/r2.

  22. MSQHard

    Continuing: the sphere of radius R has V=V0cos⁡θ on its surface and no charge inside or outside except on the surface. Which statements are correct?
    1. Inside, the field is uniform with magnitude V0/R.
    2. The surface charge density is 3ϵ0V0Rcos⁡θ.
    3. Outside, the field is exactly that of a point dipole at the centre.
    4. The total charge on the surface is 4πϵ0RV0.
    Answer and solution

    Answer: A, B, C

    Inside V=V0rRcos⁡θ=V0Rz, so E→=−V0Rzˆ, uniform. The jump in the radial field gives σ: Erout=2V0R2cos⁡θr3|R=2V0cos⁡θR, Erin=−V0cos⁡θR, so σ=ϵ0(Erout−Erin)=3ϵ0V0cos⁡θR. Outside, V∝cos⁡θ/r2 exactly: a pure dipole. cos⁡θ integrates to zero over the sphere, so the net charge is zero.

    Why people get this wrong: The last option is the charge of a sphere held at a uniform V0; here half the sphere is positive and half negative.

  23. NATHard

    A point charge of 1.0 nC is 10 cm from the centre of an isolated, uncharged metal sphere of radius 5.0 cm. The magnitude of the force on the charge is ______ μN (to three decimal places).
    Answer and solution

    Answer: 0.35 $\mu$N (±0.004)

    Images: q′=−qR/d=−0.50 nC at b=R2/d=2.5 cm from the centre (7.5 cm from q), and +0.50 nC at the centre (10 cm from q) to keep the sphere neutral. Force: kq[0.50×10−9(0.075)2−0.50×10−9(0.10)2]=(8.99)[8.89×10−8−5.00×10−8] =3.50×10−7 N =0.350μN, attractive.

    Why people get this wrong: Leaving out the centre charge (that is the grounded sphere, which gives 0.799μN).

  24. MCQHard

    A point charge is held at some distance from an isolated, uncharged conductor of any shape. The force on the charge is
    1. always attractive, however far away it is
    2. repulsive if the charge is positive
    3. zero, because the conductor has no net charge
    4. attractive only if the conductor is grounded
    Answer and solution

    Answer: A

    The charge induces opposite charge on the near side of the conductor and an equal amount of like charge on the far side. The opposite charge is closer, so the net force is attraction. In energy terms: letting the conductor's charges rearrange can only lower the energy, and the energy is lowest when the charge is close. The force falls off fast (for a small conductor, like 1/r5), but it is never repulsive.

    Why people get this wrong: Neutral does not mean no force. Grounding just makes the attraction stronger.

  25. NATHard

    Two grounded metal planes x=0 and y=0 form a right-angled corner. A charge of 1.0 nC sits at x=3.0 cm, y=4.0 cm. The magnitude of the force on it is ______ μN (to two decimal places).
    Answer and solution

    Answer: 2.07 $\mu$N (±0.02)

    Images: −q at (−3,4), −q at (3,−4), +q at (−3,−4) cm. In units of kq2 (with lengths in m): image 1 pulls along −x with 1/(0.06)2=277.8; image 2 pulls along −y with 1/(0.08)2=156.3; image 3 is 0.10 m away and pushes along (0.6,0.8) with 1/(0.1)2=100. So Fx=−277.8+60=−217.8, Fy=−156.3+80=−76.3, |F|=230.7kq2. With kq2=8.99×10−9 N m2: |F|=2.07×10−6 N.

    Why people get this wrong: Forgetting the third (positive) image. Without it both planes would not be at zero potential.

  26. MCQHard

    The outward force per unit area on the surface of a conductor where the surface charge density is σ is
    1. σ2ϵ0, outward
    2. σ22ϵ0, inward for negative σ
    3. σ2ϵ0, outward
    4. σ22ϵ0, outward whatever the sign of σ
    Answer and solution

    Answer: D

    A patch of surface feels the field of all the other charges, which is the average of the fields on the two sides: 12(σ/ϵ0+0). Force per area =σ⋅σ2ϵ0=σ22ϵ0. It depends on σ2, so it is outward for either sign: a charged soap bubble swells. It also equals the field energy density ϵ0E2/2 just outside.

    Why people get this wrong: Multiplying σ by the full outside field σ/ϵ0 counts the patch pushing on itself and doubles the answer.

  27. MCQHard

    Two large parallel metal plates A and B, a distance a apart, are both earthed. A point charge q is held between them, a/4 from plate A. The total charge induced on plate A is
    1. −q/4
    2. −q/2
    3. −3q/4
    4. −q
    Answer and solution

    Answer: C

    Use Green's reciprocity (or the image series). Compare with a second situation: no point charge, plate A at potential V0 and B earthed, so the potential between them is V0(1−x/a). Reciprocity gives QAV0+qV0(1−x/a)=0, so QA=−q(1−x/a). With x=a/4: QA=−3q/4, and QB=−q/4. Together they hold −q, and the nearer plate takes the larger share.

    Why people get this wrong: Giving the larger share to the farther plate (the shares go linearly, and the near plate gets more), or putting −q on each plate as if each were alone.

  28. MSQHard

    For two conductors, Q1=C11V1+C12V2 and Q2=C21V1+C22V2. Which statements are correct?
    1. If conductor 2 is earthed and conductor 1 is given charge Q, conductor 2 gets charge +Q.
    2. C12=C21.
    3. C12≤0.
    4. With conductor 2 earthed, Q1=C11V1.
    Answer and solution

    Answer: B, C, D

    B is Green's reciprocity. C: raise conductor 2 to V2>0 with conductor 1 earthed; field lines from 2 end on 1, so Q1<0 and C12=Q1/V2≤0. D: put V2=0 in the first equation. A is false: the earthed conductor gets a negative induced charge (Q2=C21V1<0), of size at most Q.

    Why people get this wrong: Thinking the coefficients depend on which conductor is raised (reciprocity says not), or giving the induced charge the same sign.

  29. NATHard

    A long square metal tube of side a has three of its sides earthed; the fourth side, x=0, is held at V=V0sin⁡(πy/a) for 0≤y≤a. The potential on the axis of the tube (its centre), in units of V0, is ______ (to three decimal places).
    Answer and solution

    Answer: 0.199 $V_0$ (±0.002)

    Try V=V0sin⁡(πy/a)X(x). Laplace's equation gives X′′=(π/a)2X; the side x=a is earthed, so X=sinh⁡(π(a−x)/a)sinh⁡π, which is 1 at x=0. This one term already meets every boundary condition, so by uniqueness it is the answer. At the centre: V=V0sin⁡π2⋅sinh⁡(π/2)sinh⁡π=V02.30111.549=0.199V0.

    Why people get this wrong: Using e−πx/a (a semi-infinite slot), which ignores the far earthed side and gives 0.208V0.

  30. NATHard

    A point charge of 5.0 nC is 25 cm from the centre of an earthed metal sphere of radius 10 cm. The magnitude of the induced surface charge density at the point of the sphere nearest the charge is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 61.9 nC/m$^2$ (±0.4)

    The image method gives σ(θ)=−q4πRd2−R2(R2+d2−2Rdcos⁡θ)3/2. At θ=0 the bracket is (d−R)3, so |σ|=q(d+R)4πR(d−R)2=(5.0×10−9)(0.35)4π(0.10)(0.15)2=6.19×10−8 C/m2=61.9 nC/m2.

    Why people get this wrong: Using the plane formula q/(2πh2) with h=15 cm (gives 35.4); the curved surface sees a stronger field.

← All topics · Timed mock test →