Wave optics

Class 12 · 240 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Wave optics.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    According to Huygens' principle, every point on a wavefront acts as
    1. a source of electrons
    2. a source of secondary wavelets
    3. a perfect absorber of the wave
    4. a point where the wave stops
    Answer and solution

    Answer: B

    Each point of a wavefront sends out spherical secondary wavelets. The new wavefront, a moment later, is the common tangent (envelope) of these wavelets.
  2. MCQWarm-up

    The wavefront from a point source in a uniform medium is
    1. spherical
    2. plane
    3. cylindrical
    4. parabolic
    Answer and solution

    Answer: A

    The wave spreads equally in all directions, so points at equal distance from the source are in phase. These points lie on a sphere.
  3. MCQWarm-up

    Light from a very distant star arrives at the Earth as a nearly
    1. spherical wavefront with a small radius
    2. cylindrical wavefront
    3. wavefront of zero area
    4. plane wavefront
    Answer and solution

    Answer: D

    A small part of a very large sphere is almost flat, so the wavefront is plane to a very good approximation.
  4. MCQWarm-up

    Two sources give a steady interference pattern only if they are
    1. of different frequencies
    2. of different amplitudes only
    3. coherent
    4. of different colours
    Answer and solution

    Answer: C

    Coherent sources keep a constant phase difference. Then the intensity pattern stays fixed in time. Two separate bulbs are incoherent, since their phases change randomly every 10−8 s or so.
  5. MCQWarm-up

    Constructive interference of two waves of wavelength λ occurs when their path difference is
    1. (n+12)λ
    2. nλ (n=0,1,2,…)
    3. nλ4 for odd n only
    4. (2n+1)λ4
    Answer and solution

    Answer: B

    A path difference of a whole number of wavelengths means a phase difference of 2nπ: the crests meet crests. A half-integer number gives destructive interference.
  6. NATWarm-up

    In Young's double slit experiment λ=600 nm, D=1 m and d=1 mm. Find the fringe width (in mm).
    Answer and solution

    Answer: 0.6 mm (±0.01)

    β=λDd=600×10−9×110−3=6×10−4 m =0.6 mm.
  7. MCQWarm-up

    The phenomenon that shows light is a transverse wave is
    1. polarisation
    2. interference
    3. diffraction
    4. refraction
    Answer and solution

    Answer: A

    Interference, diffraction and refraction occur for longitudinal waves too (sound). Only transverse waves can be polarised.
  8. MCQWarm-up

    Diffraction of light by a slit is most noticeable when the slit width is
    1. much larger than the wavelength
    2. much smaller than the wavelength, with no light passing
    3. exactly 1 m
    4. comparable to the wavelength of light
    Answer and solution

    Answer: D

    The spreading angle is about λ/a. It is large only when a is of the order of λ. For a very wide slit light seems to travel in straight lines.
  9. NATWarm-up

    Find the polarising (Brewster) angle for glass of refractive index 3 (in degrees).
    Answer and solution

    Answer: 60 °

    tan⁡θB=n=3, so θB=60°.
  10. MCQWarm-up

    Unpolarised light of intensity I0 passes through an ideal polaroid. The transmitted intensity is
    1. I0
    2. I0/4
    3. I0/2
    4. zero
    Answer and solution

    Answer: C

    The light's vibrations are random in all directions. On average half the intensity lies along the polaroid's axis.
  11. NATWarm-up

    Plane polarised light of intensity 80 Wm−2 falls on a polaroid whose axis makes 60° with the plane of polarisation. Find the transmitted intensity (in Wm−2).
    Answer and solution

    Answer: 20 W/m²

    Malus's law: I=I0cos2⁡θ=80×cos2⁡60°=80×14=20 Wm−2.
  12. MCQWarm-up

    The whole Young's double slit apparatus is immersed in water. The fringe width
    1. increases
    2. decreases
    3. stays the same
    4. becomes infinite
    Answer and solution

    Answer: B

    In water the wavelength becomes λ/n, so β=(λ/n)Dd is smaller by the factor n.
  13. MCQWarm-up

    In Young's experiment with monochromatic light the fringe at the centre of the screen (equidistant from both slits) is
    1. bright
    2. dark
    3. coloured
    4. half bright
    Answer and solution

    Answer: A

    Both waves travel equal distances, so the path difference is zero and they arrive in phase: a bright fringe.
  14. MCQWarm-up

    When a wave passes from air into glass, which quantity stays unchanged?
    1. wavelength
    2. speed
    3. direction of the wavefront in all cases
    4. frequency
    Answer and solution

    Answer: D

    The source fixes the frequency. The speed drops to c/n and the wavelength to λ/n. (The direction changes except at normal incidence.)
  15. NATWarm-up

    Light of wavelength 500 nm undergoes destructive interference at a point with the smallest nonzero path difference. Find that path difference (in nm).
    Answer and solution

    Answer: 250 nm

    Destructive interference needs Δ=(n+12)λ. The smallest is λ/2=250 nm.
  16. MCQWarm-up

    The colours seen on a soap bubble or an oil film on water are due to
    1. dispersion by the water
    2. polarisation of light
    3. interference of light reflected from the two surfaces of the film
    4. diffraction by the bubble edges
    Answer and solution

    Answer: C

    Light reflected from the top and bottom surfaces of the thin film interferes. Different wavelengths are strengthened at different thicknesses and viewing angles, giving colours.
  17. MCQWarm-up

    In the single slit diffraction pattern, the central maximum is
    1. dark
    2. the brightest and widest
    3. as wide as the other maxima
    4. the narrowest
    Answer and solution

    Answer: B

    The central maximum has twice the width of the others, 2λD/a, and carries most of the light.
  18. NATWarm-up

    A path difference of λ/4 corresponds to what phase difference (in degrees)?
    Answer and solution

    Answer: 90 °

    ϕ=2πλΔ=2πλ⋅λ4=π2=90°.
  19. MCQWarm-up

    Which of these waves cannot be polarised?
    1. sound waves in air
    2. light waves
    3. radio waves
    4. X-rays
    Answer and solution

    Answer: A

    Sound in air is longitudinal, so the vibration is always along the direction of travel and there is no direction to restrict. Light, radio waves and X-rays are transverse electromagnetic waves.
  20. MCQWarm-up

    Two independent sodium lamps do not show interference fringes because
    1. their light has no wavelength
    2. light never interferes
    3. they emit different speeds of light
    4. they are not coherent sources
    Answer and solution

    Answer: D

    Atoms emit light in short bursts with random phases, so the phase difference between two lamps varies randomly. The fringes shift too quickly to be seen.
  21. NATStandard

    In a double slit experiment the slits are 0.3 mm apart and the screen is 1.2 m away. The fringe width is found to be 2 mm. Find the wavelength of light (in nm).
    Answer and solution

    Answer: 500 nm

    λ=βdD=2×10−3×0.3×10−31.2=5×10−7 m =500 nm.
  22. NATStandard

    In Young's experiment λ=600 nm, D=1.5 m and d=0.45 mm. Find the distance of the third bright fringe from the central maximum (in mm).
    Answer and solution

    Answer: 6 mm

    yn=nλDd. y3=3×600×10−9×1.50.45×10−3=3×2×10−3=6×10−3 m =6 mm.
  23. NATStandard

    With λ=500 nm, D=1 m and d=0.5 mm, find the distance of the second dark fringe from the centre (in mm, counting the first dark fringe as the one nearest the centre).
    Answer and solution

    Answer: 1.5 mm (±0.01)

    Dark fringes lie at y=(n−12)β for n=1,2,… (the first dark fringe is at β/2). Here β=1 mm, so the second is at 1.5 mm.

    Why people get this wrong: The first dark fringe is at half a fringe width, not at one.

  24. NATStandard

    A double slit experiment in air gives a fringe width of 1.2 mm. The whole set-up is then put in water (n=4/3). Find the new fringe width (in mm).
    Answer and solution

    Answer: 0.9 mm (±0.01)

    β′=β/n=1.2×34=0.9 mm.
  25. NATStandard

    Fringes in a double slit experiment appear 4 mm apart on a screen 2 m from the slits with light of wavelength 640 nm. Find the slit separation (in mm, 2 decimals).
    Answer and solution

    Answer: 0.32 mm (±0.01)

    d=λDβ=640×10−9×24×10−3=3.2×10−4 m =0.32 mm.
  26. NATStandard

    In a double slit experiment the screen is 1 m from the slits. A point on the screen is 2 mm from the central fringe and the slits are 0.5 mm apart. Find the path difference at that point (in nm).
    Answer and solution

    Answer: 1000 nm

    Δ=ydD=2×10−3×0.5×10−31=10−6 m =1000 nm.
  27. NATStandard

    Two coherent waves, each of intensity I0, interfere constructively at a point. Find the resultant intensity there (in units of I0).
    Answer and solution

    Answer: 4

    At a maximum the amplitudes add: A=2a, so I∝A2=4a2. The resultant intensity is 4I0.

    Why people get this wrong: Constructive interference of two equal waves gives four times, not twice, the single intensity.

  28. NATStandard

    Two coherent sources of equal intensity produce a maximum intensity Im. Find the intensity (as a fraction of Im, 2 decimals) at a point where the phase difference is 120°.
    Answer and solution

    Answer: 0.25 (±0.01)

    I=Imcos2⁡(ϕ/2)=Imcos2⁡60°=14Im=0.25Im.
  29. NATStandard

    Two coherent sources have intensity ratio 9:1. Find Imax/Imin.
    Answer and solution

    Answer: 4

    Amplitude ratio =9:1=3:1. ImaxImin=(3+1)2(3−1)2=164=4.
  30. NATStandard

    A soap film (n=1.5) in air is viewed in reflected light of wavelength 600 nm. Find the smallest thickness (in nm) at which it appears bright.
    Answer and solution

    Answer: 100 nm

    Reflection at the top surface (air to film) gives a π phase change; at the bottom (film to air) none. The condition for brightness is 2nt=(m+12)λ. For m=0: t=λ4n=6006=100 nm.

    Why people get this wrong: The extra half-wavelength from the phase change turns the usual conditions round.

← All topics