Home / Courses / Engineering entrance / Practice / Three-dimensional geometry

Three-dimensional geometry

Class 12 · 273 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Three-dimensional geometry.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The direction cosines of the z-axis are
    1. (1,0,0)
    2. (0,1,0)
    3. (1,1,1)
    4. (0,0,1)
    Answer and solution

    Answer: D

    The z-axis makes 90∘ with the x and y axes and 0∘ with itself, so (cos⁡90∘,cos⁡90∘,cos⁡0∘)=(0,0,1) (or (0,0,−1) for the opposite direction).

    Why people get this wrong: Direction cosines must satisfy l2+m2+n2=1; (1,1,1) does not.

  2. NATWarm-up

    A line has direction cosines 13, 23, n with n>0. Find 3n.
    Answer and solution

    Answer: 2

    l2+m2+n2=1: 19+49+n2=1, so n2=49, n=23. Then 3n=2.

    Why people get this wrong: Take the positive root because n>0.

  3. MCQWarm-up

    The direction cosines of a line with direction ratios 2,−3,6 are
    1. (211,−311,611)
    2. (27,−37,67)
    3. (211,−311,611)
    4. (2,−3,6)
    Answer and solution

    Answer: B

    Divide each ratio by 22+(−3)2+62=49=7.

    Why people get this wrong: Divide by the square root of the sum of squares, not by the sum.

  4. MCQWarm-up

    The line through (1,2,3) with direction ratios 2,−1,4 is
    1. x+12=y+2−1=z+34
    2. x−12=y−2−1=z−34
    3. x−21=y+12=z−43
    4. x−14=y−2−1=z−32
    Answer and solution

    Answer: B

    Symmetric form: x−x1a=y−y1b=z−z1c with the point (x1,y1,z1) and ratios (a,b,c).

    Why people get this wrong: The numerators carry the point with a minus sign.

  5. MCQWarm-up

    The equation of the plane parallel to the xy-plane and 5 units above it is
    1. x=5
    2. z=5
    3. y=5
    4. z=0
    Answer and solution

    Answer: B

    A plane parallel to the xy-plane has a normal along the z-axis, so it is z=c. Five units above means c=5.

    Why people get this wrong: The xy-plane itself is z=0.

  6. MCQWarm-up

    The direction ratios of the normal to the plane 2x−3y+6z=12 are
    1. (2,−3,6)
    2. (2,3,6)
    3. (12,12,12)
    4. (6,−3,2)
    Answer and solution

    Answer: A

    For ax+by+cz=d the normal has ratios (a,b,c). Here (2,−3,6).

    Why people get this wrong: The constant on the right is not part of the normal.

  7. NATWarm-up

    Find the distance of the origin from the plane 2x−3y+6z=12. (2 decimal places)
    Answer and solution

    Answer: 1.7143 (±0.01)

    |0+0+0−12|4+9+36=127≈1.71.

    Why people get this wrong: The denominator is 49=7.

  8. MCQWarm-up

    The direction cosines of a line with direction ratios 2,3,6 are
    1. (211,311,611)
    2. (27,37,67)
    3. (27,−37,67)
    4. (2,3,6)
    Answer and solution

    Answer: B

    (2)2+(3)2+(6)2=49=7. Divide each ratio by 7: (27,37,67).

    Why people get this wrong: Divide by the square root of the sum of squares.

  9. MCQWarm-up

    The direction cosines of a line with direction ratios 1,2,2 are
    1. (15,25,25)
    2. (13,−23,23)
    3. (1,2,2)
    4. (13,23,23)
    Answer and solution

    Answer: D

    (1)2+(2)2+(2)2=9=3. Divide each ratio by 3: (13,23,23).

    Why people get this wrong: Divide by the square root of the sum of squares.

  10. MCQWarm-up

    The direction cosines of a line with direction ratios 4,−4,7 are
    1. (415,−415,715)
    2. (49,49,79)
    3. (4,−4,7)
    4. (49,−49,79)
    Answer and solution

    Answer: D

    (4)2+(−4)2+(7)2=81=9. Divide each ratio by 9: (49,−49,79).

    Why people get this wrong: Divide by the square root of the sum of squares.

  11. MCQWarm-up

    The equation of the xy-plane is
    1. x=0
    2. z=0
    3. y=0
    4. x+y=0
    Answer and solution

    Answer: B

    Every point of the xy-plane has z=0.

    Why people get this wrong: The plane takes its name from the axes it contains, so the third variable is zero.

  12. NATWarm-up

    Find the distance between the points (1,2,3) and (4,6,3).
    Answer and solution

    Answer: 5

    (4−1)2+(6−2)2+(3−3)2=9+16+0=5.

    Why people get this wrong: Square each difference, add, then take the root.

  13. MCQWarm-up

    The direction ratios of the x-axis can be taken as
    1. (0,1,0)
    2. (0,0,1)
    3. (1,1,1)
    4. (1,0,0)
    Answer and solution

    Answer: D

    The x-axis points along (1,0,0). Any non-zero multiple also works.

    Why people get this wrong: Direction cosines of the x-axis are (±1,0,0).

  14. MCQWarm-up

    The plane x2+y3+z6=1 cuts the y-axis at
    1. (0,2,0)
    2. (0,6,0)
    3. (0,13,0)
    4. (0,3,0)
    Answer and solution

    Answer: D

    Put x=0, z=0: y3=1, y=3.

    Why people get this wrong: The number under y is the intercept on the y-axis.

  15. NATWarm-up

    Find the distance of the origin from the plane 3x+4y=10.
    Answer and solution

    Answer: 2

    |−10|9+16+0=105=2.

    Why people get this wrong: The missing z term means a zero coefficient.

  16. MCQWarm-up

    The equation of the yz-plane is
    1. y=0
    2. x=0
    3. z=0
    4. y+z=0
    Answer and solution

    Answer: B

    Every point of the yz-plane has x=0.

    Why people get this wrong: The missing letter is the zero one.

  17. MCQWarm-up

    The vector equation of the line through the origin along iˆ+2jˆ+3kˆ is
    1. r→=λ(iˆ+2jˆ+3kˆ)
    2. r→=iˆ+2jˆ+3kˆ
    3. r→⋅(iˆ+2jˆ+3kˆ)=0
    4. r→=λiˆ+2jˆ+3kˆ
    Answer and solution

    Answer: A

    A line through the point with position vector a→ with direction b→ is r→=a→+λb→. Here a→=0→.

    Why people get this wrong: The parameter multiplies the whole direction vector.

  18. NATWarm-up

    Find the distance of the point (2,3,6) from the origin.
    Answer and solution

    Answer: 7

    4+9+36=49=7.

    Why people get this wrong: Add the squares of all three coordinates.

  19. NATWarm-up

    Find the distance of the point (1,2,3) from the xy-plane.
    Answer and solution

    Answer: 3

    The xy-plane is z=0. The distance is |z|=3.

    Why people get this wrong: Only the z-coordinate matters.

  20. MCQWarm-up

    The direction cosines of the y-axis are
    1. (1,0,0)
    2. (0,0,1)
    3. (0,1,0) (or (0,−1,0))
    4. (13,13,13)
    Answer and solution

    Answer: C

    The y-axis makes 90∘ with the x and z axes and 0∘ (or 180∘) with itself.

    Why people get this wrong: Cosine of 90∘ is 0.

  21. NATWarm-up

    How many different sets of direction cosines does a line have?
    Answer and solution

    Answer: 2

    If (l,m,n) is one set, then (−l,−m,−n) is the other (the opposite direction). So there are exactly 2.

    Why people get this wrong: Direction ratios have infinitely many sets, direction cosines only two.

  22. MCQStandard

    The direction cosines of the line joining A(2,1,−1) and B(4,−3,5), taken from A to B, are
    1. (114,−214,314)
    2. (156,−256,356)
    3. (314,114,−214)
    4. (2,−4,6)
    Answer and solution

    Answer: A

    AB→=(4−2,−3−1,5+1)=(2,−4,6), with |AB|=4+16+36=56=214. Dividing: (2214,−4214,6214)=(114,−214,314).

    Why people get this wrong: 56 simplifies; each component must be divided by 214.

  23. MCQStandard

    A line is equally inclined to the three coordinate axes. Its direction cosines (positive choice) are
    1. (13,13,13)
    2. (12,12,12)
    3. (13,13,13)
    4. (1,1,1)
    Answer and solution

    Answer: C

    Equal angles mean l=m=n. Then 3l2=1 and l=13.

    Why people get this wrong: Check l2+m2+n2=1.

  24. NATStandard

    A line is equally inclined to all three axes. Find the angle in degrees that it makes with each axis (acute angle). (2 decimal places)
    Answer and solution

    Answer: 54.7356 (±0.01)

    cos⁡α=13, so α=cos−1⁡(0.5774)≈54.74∘.

    Why people get this wrong: It is not 60∘.

  25. NATStandard

    The projections of a segment on the three coordinate axes are 3, 4 and 12. Find its length.
    Answer and solution

    Answer: 13

    Length2 = sum of squares of the projections =9+16+144=169. Length =13.

    Why people get this wrong: Add the squares, then take the root.

  26. MCQStandard

    The line through A(2,−1,3) and B(5,3,−1) is
    1. x−23=y+14=z−34
    2. x−23=y+14=z−3−4
    3. x−27=y+12=z−32
    4. x−53=y−34=z+14
    Answer and solution

    Answer: B

    Direction ratios: B−A=(3,4,−4). Using A: x−23=y+14=z−3−4.

    Why people get this wrong: Subtract, do not add, the coordinates.

  27. MCQStandard

    The Cartesian form of r→=(iˆ+2jˆ−kˆ)+λ(3iˆ−jˆ+2kˆ) is
    1. x−13=y−2−1=z−12
    2. x+13=y+2−1=z−12
    3. x−31=y+12=z−2−1
    4. x−13=y−2−1=z+12
    Answer and solution

    Answer: D

    The point is (1,2,−1) and the direction ratios are (3,−1,2). So x−13=y−2−1=z−(−1)2=z+12.

    Why people get this wrong: Mind z−(−1)=z+1.

  28. MCQStandard

    The direction cosines of x−23=y+1−2=z−56 are
    1. (27,17,57)
    2. (311,−211,611)
    3. (37,−27,67)
    4. (3,−2,6)
    Answer and solution

    Answer: C

    The ratios are the denominators (3,−2,6). Length 9+4+36=7. The point (2,−1,5) plays no part.

    Why people get this wrong: The numbers in the numerators are not direction ratios.

  29. MCQStandard

    The equation of the z-axis is
    1. x1=y0=z0
    2. x0=y0=z1
    3. x0=y1=z0
    4. x1=y1=z1
    Answer and solution

    Answer: B

    It passes through the origin with direction ratios (0,0,1). So x0=y0=z1, meaning x=0,y=0.

    Why people get this wrong: A zero denominator means that coordinate stays fixed.

  30. MCQStandard

    Two lines r→=a→1+λb→1 and r→=a→2+μb→2 intersect if and only if
    1. b→1⋅b→2=0
    2. (a→2−a→1)×(b→1×b→2)=0→
    3. b→1×b→2=0→
    4. (a→2−a→1)⋅(b→1×b→2)=0 and b→1×b→2≠0→
    Answer and solution

    Answer: D

    Zero shortest distance means (a→2−a→1)⋅(b→1×b→2)=0. If also b→1×b→2=0→ the lines are parallel (not meeting unless the same line). So we need the dot to vanish with a non-zero cross product. b→1⋅b→2=0 only says they are perpendicular directions.

    Why people get this wrong: Zero distance for parallel lines means something else.

← All topics