Straight lines
Class 11 · 202 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Straight lines.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
Find the distance between the points and .Answer and solution
Answer: 5
.
Why people get this wrong: Square the differences first, then add, then root.
-
MCQWarm-up
The mid-point of the segment joining and isAnswer and solution
Answer: B
Mid-point .
Why people get this wrong: is the sum; divide by 2.
-
NATWarm-up
Find the slope of the line through and .Answer and solution
Answer: 3
.
Why people get this wrong: Subtract the y values and the x values in the same order.
-
MCQWarm-up
The slope of the line isAnswer and solution
Answer: D
Write . The slope is the coefficient of : . In general the slope of is .
Why people get this wrong: Do not forget the minus sign.
-
NATWarm-up
Find the area of the triangle with vertices , and .Answer and solution
Answer: 12
It is a right triangle with legs 4 and 6: area .
Why people get this wrong: Half of base times height.
-
MCQWarm-up
The line with slope 2 and y-intercept isAnswer and solution
Answer: A
with , gives .
Why people get this wrong: Slope goes with , intercept is the constant.
-
NATWarm-up
Find the x-intercept of the line .Answer and solution
Answer: 6
Put : , so .
Why people get this wrong: For the x-intercept put .
-
MCQWarm-up
The centroid of the triangle with vertices , and isAnswer and solution
Answer: C
Centroid .
Why people get this wrong: Divide the sum by 3, not by 2.
-
NATWarm-up
Find the distance of the origin from the line .Answer and solution
Answer: 2
.
Why people get this wrong: The denominator is .
-
MCQWarm-up
The line through parallel to isAnswer and solution
Answer: C
A parallel line has the same part: . It passes through : , so .
Why people get this wrong: is perpendicular, not parallel.
-
MCQWarm-up
A line has slope . The slope of a line perpendicular to it isAnswer and solution
Answer: A
For perpendicular lines . So .
Why people get this wrong: Flip and change the sign.
-
MCQWarm-up
The point lies in the- first quadrant
- second quadrant
- third quadrant
- fourth quadrant
Answer and solution
Answer: D
and : right of the y-axis and below the x-axis, which is the fourth quadrant.
Why people get this wrong: Quadrants go anticlockwise from the top right.
-
NATWarm-up
Find the y-intercept of the line .Answer and solution
Answer: -7
Put : . In the intercept is .
Why people get this wrong: Keep the sign of the constant.
-
MCQWarm-up
The equation of the x-axis isAnswer and solution
Answer: B
Every point on the x-axis has , so the equation is . ( is the y-axis.)
Why people get this wrong: The x-axis is where is zero.
-
NATWarm-up
Find the distance of the point from the x-axis.Answer and solution
Answer: 4
The distance from the x-axis is the absolute value of the y-coordinate: 4.
Why people get this wrong: From the x-axis use ; from the y-axis use .
-
NATStandard
The point divides the segment joining and internally in the ratio . Find the sum of the coordinates of .Answer and solution
Answer: 9
. Sum .
Why people get this wrong: In the multiplies the far point .
-
MCQStandard
The point dividing the join of and externally in the ratio isAnswer and solution
Answer: D
For external division use : , . is the internal point.
Why people get this wrong: External division has a minus sign.
-
NATStandard
Find the area of the triangle with vertices , and .Answer and solution
Answer: 11
.
Why people get this wrong: Take the absolute value before halving.
-
NATStandard
Find the acute angle (in degrees) between the lines and .Answer and solution
Answer: 15
The lines make and with the x-axis. The angle between them is . (Check: .)
Why people get this wrong: Subtract the inclinations; no formula needed here.
-
NATStandard
Find the distance of the point from the line .Answer and solution
Answer: 3
.
Why people get this wrong: Put the numbers in with their signs.
-
MCQStandard
The distance between the parallel lines and is- 5
- 3
- 15
- 1
Answer and solution
Answer: B
.
Why people get this wrong: 15 is the numerator; divide by 5.
-
NATStandard
The foot of the perpendicular from to the line is . Find .Answer and solution
Answer: 1
The foot lies on the line, so straight away. (Full work: the foot is , since .)
Why people get this wrong: The foot lies on the line itself.
-
NATStandard
A line through cuts equal intercepts on both axes. Find .Answer and solution
Answer: 5
means . Through : .
Why people get this wrong: Equal intercepts give .
-
NATStandard
A line through has slope . Find the sum of its x-intercept and y-intercept.Answer and solution
Answer: 6
, i.e. . Put : . Put : . Sum .
Why people get this wrong: Find both intercepts separately.
-
MCQStandard
The line through and isAnswer and solution
Answer: A
Slope . , so . (Check : .)
Why people get this wrong: Test one given point in your answer.
-
NATStandard
Find the sum of the coordinates of the centroid of the triangle with vertices , and .Answer and solution
Answer: 5
Centroid . Sum .
Why people get this wrong: Add the y-values with their signs.
-
MCQStandard
The line through making an angle of with the positive x-axis isAnswer and solution
Answer: B
Slope . , so .
Why people get this wrong: A angle would give the slope .
-
NATStandard
The points , and are collinear. Find .Answer and solution
Answer: 5
Slope of the first two . Slope from to must also be 2: , so .
Why people get this wrong: Use the same slope for each pair.
-
NATStandard
Find the distance between the parallel lines and .Answer and solution
Answer: 2
Write them as and . .
Why people get this wrong: The right side must be moved to the left before using .
-
MCQStandard
Assertion (A): The lines with slopes and are perpendicular.
Reason (R): If two non-vertical lines are perpendicular then the product of their slopes is .
- Both A and R are true and R is the correct explanation of A
- Both A and R are true but R is not the correct explanation of A
- A is true but R is false
- A is false but R is true
Answer and solution
Answer: A
, so A is true. R is the exact condition that gives it. So R explains A.
Why people get this wrong: A vertical line and a horizontal line are perpendicular too, but the slope rule does not apply.