Solid state and surface chemistry
Class 12 · 343 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Solid state and surface chemistry.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Which of the following is a crystalline solid?- Sodium chloride
- Glass
- Rubber
- Plastic
Answer and solution
Answer: A
NaCl has a regular long-range arrangement of ions and a sharp melting point. Glass, rubber and most plastics are amorphous (supercooled liquids or disordered polymers).
-
MCQWarm-up
Amorphous solids differ from crystalline solids in that they- have long-range order
- have no sharp melting point and are isotropic
- have a sharp melting point
- are anisotropic
Answer and solution
Answer: B
Amorphous solids have only short-range order, melt over a range of temperatures, and show the same properties in all directions (isotropic). Crystalline solids are anisotropic.
-
MCQWarm-up
The number of atoms in a face-centred cubic unit cell is- 1
- 2
- 4
- 6
Answer and solution
Answer: C
8 corners × 1/8 + 6 faces × 1/2 = 1 + 3 = 4.
-
MCQWarm-up
The number of atoms per unit cell in a body-centred cubic lattice is- 1
- 4
- 8
- 2
Answer and solution
Answer: D
8 × 1/8 (corners) + 1 (body centre) = 2.
-
MCQWarm-up
The coordination number of an atom in a simple cubic lattice is- 6
- 4
- 8
- 12
Answer and solution
Answer: A
In simple cubic packing, each atom touches 6 neighbours (up, down, left, right, front, back).
-
MCQWarm-up
The coordination number in a close-packed structure (ccp or hcp) is- 6
- 12
- 8
- 4
Answer and solution
Answer: B
Each sphere touches 6 in its own layer, 3 in the layer above and 3 below: 12.
-
MCQWarm-up
The packing efficiency of a face-centred cubic lattice is- 68%
- 52.4%
- 74%
- 100%
Answer and solution
Answer: C
fcc and hcp pack 74% of the space, bcc 68% and simple cubic 52.4%.
-
MCQWarm-up
A Schottky defect is caused by- an ion moving to an interstitial site
- an electron trapped at an anion vacancy
- an impurity ion
- missing equal numbers of cations and anions from their lattice sites
Answer and solution
Answer: D
Schottky defect: equal numbers of cations and anions are absent, so the crystal stays neutral and its density falls. Moving to an interstitial site is a Frenkel defect.
-
MCQWarm-up
Frenkel defect is shown by- AgCl
- NaCl
- KCl
- CsCl
Answer and solution
Answer: A
Frenkel defects are common when the cation is much smaller than the anion and the coordination number is low: ZnS, AgCl, AgBr, AgI. NaCl, KCl and CsCl show Schottky defects.
-
MCQWarm-up
The electrical conductivity of a semiconductor- decreases with temperature
- increases with temperature
- does not depend on temperature
- is zero at all temperatures
Answer and solution
Answer: B
Heating promotes more electrons across the small band gap, so the conductivity goes up. In a metal the conductivity falls with temperature because of lattice vibrations.
-
MCQWarm-up
Silicon doped with phosphorus is a- p-type semiconductor
- an insulator
- n-type semiconductor
- a metal
Answer and solution
Answer: C
P has five valence electrons, one more than Si, giving a free electron per dopant atom. Negative carriers: n-type.
-
MCQWarm-up
A substance with all electrons paired is- paramagnetic
- ferromagnetic
- ferrimagnetic
- diamagnetic
Answer and solution
Answer: D
Paired electrons have no net magnetic moment, so the substance is weakly repelled by a magnetic field: diamagnetic.
-
MCQWarm-up
The accumulation of molecules of a substance on the surface of another is called- adsorption
- absorption
- desorption
- diffusion
Answer and solution
Answer: A
Adsorption is a surface phenomenon. In absorption, the substance goes uniformly into the bulk (e.g. water into a sponge).
-
MCQWarm-up
Which is true for physisorption?- It involves chemical bonds
- It arises from van der Waals forces and is reversible
- It is irreversible
- It is highly specific
Answer and solution
Answer: B
Physisorption involves weak van der Waals forces, is reversible, non-specific, and forms multilayers. Chemisorption involves bonds.
-
MCQWarm-up
A substance that increases the rate of a reaction without being used up is a- reactant
- inhibitor
- catalyst
- product
Answer and solution
Answer: C
A catalyst provides an alternative path of lower activation energy and is recovered unchanged at the end.
-
MCQWarm-up
The size of colloidal particles is in the range- less than 1 nm
- more than 1000 nm
- 0.01 to 0.1 nm
- 1 to 1000 nm
Answer and solution
Answer: D
Colloidal particles are between 1 nm and 1000 nm (10-9 to 10-6 m). Smaller particles form a true solution, and larger ones a suspension.
-
MCQWarm-up
The scattering of light by colloidal particles is called the- Tyndall effect
- Brownian motion
- electrophoresis
- Hardy-Schulze effect
Answer and solution
Answer: A
The visible path of a light beam through a sol is the Tyndall effect.
-
MCQWarm-up
Milk is an example of- a gel
- an emulsion (liquid dispersed in liquid)
- a foam
- a solid sol
Answer and solution
Answer: B
Milk has tiny fat droplets dispersed in water, so it is an oil-in-water emulsion.
-
MCQWarm-up
Match each lattice (List I) with the number of atoms per unit cell (List II).- A-r, B-q, C-p, D-s
- A-q, B-r, C-p, D-s
- A-q, B-r, C-s, D-p
- A-p, B-r, C-q, D-s
Answer and solution
Answer: B
sc: 1 (q). bcc: 2 (r). fcc: 4 (p). hcp (per hexagonal cell): 6 (s).
-
MCQStandard
Which crystal system has a = b ≠ c and α = β = γ = 90°?- Cubic
- Orthorhombic
- Tetragonal
- Hexagonal
Answer and solution
Answer: C
Tetragonal: two equal edges and one different, all angles 90°. Cubic has a = b = c. Orthorhombic has all three different. Hexagonal has γ = 120°.
-
MCQStandard
The total number of Bravais lattices in all crystal systems is- 7
- 12
- 230
- 14
Answer and solution
Answer: D
There are 7 crystal systems and 14 Bravais lattices. 230 is the number of space groups.
-
MCQStandard
An atom at a corner of a cube is shared by- 8 unit cells, contributing 1/8 to each
- 4 unit cells
- 2 unit cells
- 1 unit cell
Answer and solution
Answer: A
A corner atom is shared by 8 cubes, a face atom by 2, an edge atom by 4 and a body-centre atom by 1.
-
MCQStandard
The relation between the radius r of an atom and the edge a of an fcc cell is- a = 2r
- a = 2√2 r
- a = 4r/√3
- a = √2 r
Answer and solution
Answer: B
In fcc, atoms touch along the face diagonal, which is 4r = a√2, so a = 4r/√2 = 2√2 r. a = 2r is for simple cubic, and 4r/√3 for bcc.
-
MCQStandard
In bcc, the atoms touch along- the edge
- the face diagonal
- the body diagonal
- the face centre line
Answer and solution
Answer: C
In bcc, the body-centre atom touches the corner atoms, so the body diagonal √3 a = 4r.
-
MCQStandard
For N atoms in a close-packed lattice, the number of octahedral and tetrahedral voids are- 2N and N
- N and N
- 2N and 2N
- N and 2N
Answer and solution
Answer: D
Each atom has one octahedral and two tetrahedral voids associated with it.
-
MCQStandard
Tetrahedral voids are formed by- four spheres at the corners of a tetrahedron
- six spheres
- three spheres in the same plane
- eight spheres
Answer and solution
Answer: A
A tetrahedral void is surrounded by 4 spheres (coordination number 4). An octahedral void is surrounded by 6.
-
MCQStandard
In the rock salt (NaCl) structure, the coordination numbers of Na+ and Cl- are- 4 and 4
- 6 and 6
- 8 and 8
- 8 and 4
Answer and solution
Answer: B
Each ion is surrounded by 6 oppositely charged ions at the corners of an octahedron.
-
MCQStandard
The number of formula units of NaCl per unit cell is- 1
- 2
- 4
- 8
Answer and solution
Answer: C
Cl-: 4 (fcc), Na+: 4 (octahedral voids: 12 × 1/4 + 1 = 4). Z = 4 formula units of NaCl.
-
MCQStandard
CsCl has a- fcc arrangement with 6:6
- rock salt arrangement
- zinc blende arrangement
- simple cubic arrangement with coordination number 8:8
Answer and solution
Answer: D
Cs+ sits at the body centre of a cube of Cl- ions (and vice versa). Coordination number 8:8, one formula unit per cell.
-
MCQStandard
Which defect decreases the density of a crystal?- Schottky defect
- Frenkel defect
- Interstitial impurity
- F-centre
Answer and solution
Answer: A
In a Schottky defect, ions leave the crystal (to the surface), so mass drops at constant volume, and the density falls. In Frenkel defects the density is unchanged.