Home / Courses / Engineering entrance / Practice / Rotational motion

Rotational motion

Class 11 · 222 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Rotational motion.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The dimensional formula of torque is
    1. MLT−2
    2. ML2T−1
    3. ML2T−2
    4. ML2T−3
    Answer and solution

    Answer: C

    τ=rF, so the dimensions are (length)(force) =L⋅MLT−2=ML2T−2. MLT−2 is force, ML2T−1 is angular momentum and ML2T−3 is power. Torque has the same dimensions as energy, but it is a different quantity.
  2. NATWarm-up

    A force of 20 N acts at right angles to a spanner, 0.5 m from the nut. Find the torque (in N m).
    Answer and solution

    Answer: 10 N m

    The force is perpendicular to the arm, so τ=rF=0.5×20=10 N m.
  3. MCQWarm-up

    The moment of inertia of a thin ring of mass M and radius R about an axis through its centre and perpendicular to its plane is
    1. 12MR2
    2. MR2
    3. 25MR2
    4. 23MR2
    Answer and solution

    Answer: B

    Every bit of the ring is at the same distance R from the axis, so I=∑miR2=MR2. 12MR2 is the disc, 25MR2 the solid sphere and 23MR2 the hollow sphere.
  4. MCQWarm-up

    The SI unit of angular momentum is
    1. kgm2s−1
    2. kgms−1
    3. Nm
    4. kgm2s−2
    Answer and solution

    Answer: A

    L=Iω, so the unit is kgm2×s−1=kgm2s−1 (the same as J s). kgms−1 is linear momentum, and N m (or kgm2s−2) is the unit of torque.
  5. NATWarm-up

    A wheel of moment of inertia 2 kgm2 spins at 5 rads−1. Find its rotational kinetic energy (in J).
    Answer and solution

    Answer: 25 J

    K=12Iω2=12×2×25=25 J.
  6. MCQWarm-up

    A skater spinning on ice pulls her arms in. Her angular speed increases because
    1. her angular momentum increases
    2. her linear momentum is conserved
    3. the ice pushes her round faster
    4. her angular momentum stays constant while her moment of inertia decreases
    Answer and solution

    Answer: D

    No external torque acts about the vertical axis, so L=Iω is constant. Pulling the arms in lowers I, so ω must rise. Her angular momentum itself does not change.
  7. NATWarm-up

    A wheel turns at 120 revolutions per minute. Find its angular speed (in rad/s, 2 decimals).
    Answer and solution

    Answer: 12.57 rad/s (±0.02)

    ω=2πn with n=120/60=2 rev/s. So ω=4π=12.57 rads−1.

    Why people get this wrong: Convert minutes to seconds before multiplying by 2π.

  8. MCQWarm-up

    The moment of inertia of a solid sphere of mass M and radius R about a diameter is
    1. 23MR2
    2. 12MR2
    3. 25MR2
    4. MR2
    Answer and solution

    Answer: C

    For a solid sphere I=25MR2. The hollow (thin-walled) sphere has 23MR2.
  9. NATWarm-up

    A net torque of 12 N m acts on a body of moment of inertia 4 kgm2. Find its angular acceleration (in rads−2).
    Answer and solution

    Answer: 3 rad/s²

    τ=Iα, so α=12/4=3 rads−2.
  10. MCQWarm-up

    A rigid body is in complete mechanical equilibrium when
    1. the net force on it is zero
    2. the net force and the net torque on it are both zero
    3. the net torque on it is zero
    4. its centre of mass is at rest
    Answer and solution

    Answer: B

    Zero net force stops the centre of mass accelerating, and zero net torque stops the body's rotation changing. Two equal and opposite forces along different lines (a couple) give zero net force but a torque, so force alone is not enough.
  11. MCQWarm-up

    The moment of inertia of a rigid body depends on
    1. its mass, how the mass is distributed and the position of the axis
    2. its angular velocity
    3. the torque applied to it
    4. its mass only
    Answer and solution

    Answer: A

    I=∑miri2 depends on the masses and their distances from the chosen axis. It does not depend on how fast the body turns or on the torque.
  12. NATWarm-up

    A wheel turns at a steady 3 rads−1. Through what angle does it turn in 10 s (in rad)?
    Answer and solution

    Answer: 30 rad

    θ=ωt=3×10=30 rad.
  13. NATWarm-up

    A point 0.4 m from the axis of a wheel turning at 5 rads−1 has what speed (in ms−1)?
    Answer and solution

    Answer: 2 m/s

    v=rω=0.4×5=2 ms−1.
  14. MCQWarm-up

    The torque of a force about an axis is zero when
    1. the force is perpendicular to the arm
    2. the line of action of the force passes through the axis
    3. the force is large
    4. the arm is long
    Answer and solution

    Answer: B

    τ=rFsin⁡θ. It is zero if r=0 or sin⁡θ=0 (the force is along the line to the axis). A force perpendicular to the arm gives the largest torque.
  15. MCQWarm-up

    In rotational motion, the quantity that plays the role of mass in F=ma is
    1. the moment of inertia
    2. the angular momentum
    3. the torque
    4. the angular velocity
    Answer and solution

    Answer: A

    τ=Iα matches F=ma: torque for force, angular acceleration for acceleration, moment of inertia for mass.
  16. NATWarm-up

    A body with moment of inertia 0.5 kgm2 turns at 8 rads−1. Find its angular momentum (in kgm2s−1).
    Answer and solution

    Answer: 4 kg m²/s

    L=Iω=0.5×8=4.
  17. NATStandard

    Find the moment of inertia of a uniform disc of mass 4 kg and radius 0.5 m about its central axis (in kgm2).
    Answer and solution

    Answer: 0.5 kg m² (±0.001)

    I=12MR2=12×4×0.25=0.5 kgm2.
  18. NATStandard

    Find the moment of inertia of a uniform rod of mass 3 kg and length 2 m about an axis through one end and perpendicular to the rod (in kgm2).
    Answer and solution

    Answer: 4 kg m²

    Iend=13ML2=13×3×4=4 kgm2. (Check with the parallel axis theorem: 112ML2+M(L/2)2=1+3=4.)
  19. NATStandard

    A uniform disc of mass 2 kg and radius 0.2 m turns about an axis through a point on its rim, perpendicular to its plane. Find the moment of inertia (in kgm2).
    Answer and solution

    Answer: 0.12 kg m² (±0.001)

    Icm=12MR2. Parallel axis theorem with d=R: I=12MR2+MR2=32MR2=1.5×2×0.04=0.12 kgm2.
  20. MCQStandard

    The perpendicular axis theorem Iz=Ix+Iy can be applied to
    1. any three-dimensional body
    2. a solid sphere only
    3. a body only when it is symmetrical about the z-axis
    4. a flat (planar) body, with the x and y axes in its plane
    Answer and solution

    Answer: D

    The proof uses z=0 for every point, which holds only for a plane lamina. It does not work for a sphere or cube.

    Why people get this wrong: The theorem needs the body to lie in a plane; the parallel axis theorem works for any body.

  21. NATStandard

    A thin ring of mass 1 kg and radius 1 m. Find its moment of inertia about a diameter (in kgm2).
    Answer and solution

    Answer: 0.5 kg m² (±0.001)

    About the axis perpendicular to the plane through the centre, Iz=MR2. By symmetry the two diameters x and y in the plane have equal I, so 2Id=MR2 and Id=12MR2=0.5.
  22. NATStandard

    A particle of mass 2 kg moves in a straight line at 3 ms−1. The line is 4 m from a point O. Find its angular momentum about O (in kgm2s−1).
    Answer and solution

    Answer: 24 kg m²/s

    L=mvd where d is the perpendicular distance of the line of motion from O. L=2×3×4=24.
  23. NATStandard

    A flywheel of moment of inertia 0.5 kgm2 is acted on by a steady torque of 2 N m for 5 s, starting from rest. Find its angular speed at the end (in rad/s).
    Answer and solution

    Answer: 20 rad/s

    α=τ/I=2/0.5=4 rads−2. ω=αt=4×5=20 rads−1.
  24. MCQStandard

    A solid sphere and a hollow sphere have the same mass and radius. About a diameter,
    1. the solid sphere has the larger moment of inertia
    2. both have the same moment of inertia
    3. the hollow sphere has the larger moment of inertia
    4. it depends on the density of the material only
    Answer and solution

    Answer: C

    Solid: 25MR2=0.4MR2. Hollow: 23MR2=0.67MR2. The hollow sphere has all its mass at the full distance R, so I is larger.
  25. NATStandard

    A wheel turning at 10 rads−1 slows down uniformly at 2 rads−2 until it stops. Find the angle it turns through (in rad).
    Answer and solution

    Answer: 25 rad

    ω2=ω02−2αθ with ω=0: θ=ω02/(2α)=100/4=25 rad.
  26. NATStandard

    A spinning skater changes her moment of inertia to half its value by pulling in her arms. By what factor does her rotational kinetic energy change?
    Answer and solution

    Answer: 2

    L=Iω stays constant, so ω doubles. K=L2/(2I), so halving I doubles K. The extra energy comes from the work she does pulling her arms in against the outward pull.

    Why people get this wrong: Energy is not conserved here: the skater does work.

  27. MCQStandard

    A wheel rolls without slipping on a horizontal road. The point of the wheel that touches the road is
    1. moving forward with speed v
    2. momentarily at rest relative to the road
    3. moving backward with speed v
    4. moving with speed 2v forward
    Answer and solution

    Answer: B

    Rolling without slipping means vcm=ωR. At the contact point the velocity is vcm−ωR=0. The top point moves at 2vcm.
  28. NATStandard

    A solid cylinder of mass 2 kg rolls without slipping with centre-of-mass speed 4 ms−1. Find its total kinetic energy (in J).
    Answer and solution

    Answer: 24 J

    K=12mv2(1+k2R2) and k2/R2=12 for a solid cylinder. K=12×2×16×1.5=24 J. (Translational 16 J + rotational 8 J.)
  29. NATStandard

    A force of 10 N acts on the end of a 0.4 m spanner, at 30∘ to the spanner. Find the torque about the nut (in N m).
    Answer and solution

    Answer: 2 N m

    τ=rFsin⁡θ=0.4×10×sin⁡30∘=2 N m. Only the part of the force perpendicular to the arm turns the nut.

    Why people get this wrong: Use the angle between the force and the arm, not the angle with the perpendicular.

  30. MCQStandard

    The moment of inertia of a uniform thin rod of mass M and length L about an axis through its centre and perpendicular to the rod is
    1. ML212
    2. ML23
    3. ML22
    4. ML26
    Answer and solution

    Answer: A

    About the centre, I=112ML2. About one end it is 13ML2 (parallel axis theorem). The other two are not standard values.

← All topics