Home / Courses / Engineering entrance / Practice / Metals and metallurgy

Metals and metallurgy

Class 12 · 241 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Metals and metallurgy.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A naturally occurring substance from which a metal can be extracted profitably is called a(n)
    1. ore
    2. gangue
    3. flux
    4. slag
    Answer and solution

    Answer: A

    A mineral is any natural compound of a metal; an ore is a mineral from which the metal can be got easily and cheaply.

    Why people get this wrong: All ores are minerals, but not all minerals are ores.

  2. MCQWarm-up

    The earthy impurities present in an ore are called
    1. slag
    2. gangue
    3. matte
    4. flux
    Answer and solution

    Answer: B

    Gangue (matrix) is the unwanted rock and sand that comes with the ore. Slag is what forms when a flux joins the gangue in the furnace.

  3. MCQWarm-up

    The formula of haematite is
    1. Fe3O4
    2. FeCO3
    3. Fe2O3
    4. FeS2
    Answer and solution

    Answer: C

    Haematite is the red oxide Fe2O3. Magnetite is Fe3O4, siderite is FeCO3 and iron pyrites is FeS2.

  4. MCQWarm-up

    The chief ore of aluminium is
    1. cryolite, Na3AlF6
    2. kaolin used as an ore of iron
    3. corundum used mainly as an abrasive and not mined as the main ore
    4. bauxite, Al2O3·xH2O
    Answer and solution

    Answer: D

    Bauxite is the main ore. Cryolite is not an ore for the metal; it is used as the solvent in the electrolysis. Corundum is crystalline Al2O3, a gemstone and abrasive.

  5. MCQWarm-up

    Zinc blende has the formula
    1. ZnS
    2. ZnCO3
    3. ZnO
    4. ZnSO4
    Answer and solution

    Answer: A

    Zinc blende (sphalerite) is zinc sulphide. Calamine is ZnCO3 and zincite is ZnO.

  6. MCQWarm-up

    Copper pyrites has the formula
    1. Cu2S
    2. CuFeS2
    3. Cu2O
    4. CuCO3·Cu(OH)2
    Answer and solution

    Answer: B

    Copper pyrites (chalcopyrite) is CuFeS2. Copper glance is Cu2S, cuprite is Cu2O and malachite is CuCO3·Cu(OH)2.

  7. MCQWarm-up

    Galena is the ore of
    1. silver, Ag2S
    2. zinc, ZnS
    3. lead, PbS
    4. mercury, HgS
    Answer and solution

    Answer: C

    Galena is lead sulphide, PbS.

  8. MCQWarm-up

    Which of these metals is found in the native (free) state in nature?
    1. Sodium
    2. Aluminium
    3. Zinc
    4. Gold
    Answer and solution

    Answer: D

    Unreactive metals such as gold, platinum and sometimes silver and copper occur free. Sodium, aluminium and zinc are reactive and occur as compounds.

  9. MCQWarm-up

    Heating an ore in a limited supply of air or none, below its melting point, is called
    1. calcination
    2. roasting
    3. smelting
    4. leaching
    Answer and solution

    Answer: A

    Calcination removes water and CO2 from hydrated oxides and carbonates. Roasting is done in excess air.

  10. MCQWarm-up

    Roasting is mainly used for
    1. carbonate ores, giving CO2
    2. sulphide ores, converting them to oxides
    3. oxide ores of aluminium
    4. purifying native gold
    Answer and solution

    Answer: B

    In excess air a sulphide is oxidised: 2ZnS + 3O2 → 2ZnO + 2SO2.

  11. MCQWarm-up

    Froth flotation is used to concentrate
    1. carbonate ores
    2. haematite
    3. sulphide ores
    4. native gold
    Answer and solution

    Answer: C

    Sulphide ore particles are wetted by oil and carried up in the froth. Oxide ores are usually concentrated by other methods.

  12. MCQWarm-up

    A substance added to remove the gangue as an easily fusible material is a
    1. collector
    2. depressant
    3. frother
    4. flux
    Answer and solution

    Answer: D

    A flux combines with the gangue to form a slag that melts and runs off.

  13. MCQWarm-up

    Blast furnace iron which contains about 4% carbon is
    1. pig iron
    2. wrought iron
    3. stainless steel
    4. mild steel
    Answer and solution

    Answer: A

    Pig iron has about 4% carbon with some Si, S, P and Mn. Wrought iron has the least (0.1 to 0.25%).

  14. MCQWarm-up

    In the Hall–Héroult process the anode is made of
    1. platinum
    2. graphite (carbon)
    3. aluminium
    4. copper
    Answer and solution

    Answer: B

    The anodes are graphite blocks. They are slowly burnt away by the oxygen formed and have to be renewed.

  15. MCQWarm-up

    Impure copper is refined by
    1. froth flotation
    2. leaching with NaOH
    3. electrolysis
    4. zone refining
    Answer and solution

    Answer: C

    Impure copper is the anode, pure copper the cathode, and the electrolyte is acidified copper sulphate.

  16. MCQWarm-up

    Cryolite has the formula
    1. Na2AlF5
    2. AlF3
    3. Na3AlCl6
    4. Na3AlF6
    Answer and solution

    Answer: D

    Cryolite is sodium hexafluoroaluminate(III).

  17. MCQWarm-up

    Zone refining is used to get very pure
    1. germanium
    2. iron
    3. sodium
    4. aluminium oxide
    Answer and solution

    Answer: A

    It is used for semiconductors such as Ge, Si and Ga, where a part in 109 of impurity matters.

  18. MCQWarm-up

    The slag in the blast furnace is mainly
    1. iron silicate, FeSiO3
    2. calcium silicate, CaSiO3
    3. calcium carbonate
    4. calcium sulphate
    Answer and solution

    Answer: B

    Limestone gives CaO, which is a basic flux, and it joins the acidic gangue SiO2: CaO + SiO2 → CaSiO3.

  19. MCQStandard

    In froth flotation, pine oil acts mainly as a
    1. depressant for lead sulphide
    2. flux for silica
    3. frother, and it also helps wet the sulphide particles
    4. reducing agent
    Answer and solution

    Answer: C

    Pine oil and cresols are frothers that make a stable froth. Collectors such as xanthates make the ore wettable by oil. The ore particles rise with the bubbles, while gangue wetted by water sinks.

  20. MCQStandard

    In a mixture of ZnS and PbS, sodium cyanide is added in froth flotation so that
    1. PbS is kept from rising, and ZnS comes up with the froth
    2. both sulphides rise together
    3. both sulphides stay down
    4. ZnS is kept from rising, and PbS comes up with the froth
    Answer and solution

    Answer: D

    NaCN acts as a depressant. It forms a soluble complex, Na2[Zn(CN)4], on the surface of ZnS, so ZnS stops rising, while PbS is left to float.

    Why people get this wrong: The depressant selects which sulphide stays down.

  21. MCQStandard

    The concentration of bauxite from its ore by Baeyer's (Bayer's) leaching uses
    1. hot concentrated NaOH solution, which dissolves Al2O3 as sodium aluminate and leaves Fe2O3 and TiO2
    2. dilute HCl, which dissolves Fe2O3 and leaves Al2O3
    3. cold dilute H2SO4
    4. a magnet to remove iron
    Answer and solution

    Answer: A

    Al2O3 is amphoteric. It dissolves in hot NaOH as Na[Al(OH)4]. Iron oxide and titania, which are basic or inert, remain as red mud.

  22. MCQStandard

    Which of these is concentrated by magnetic separation?
    1. Zinc blende
    2. Wolframite (magnetic) mixed with non-magnetic cassiterite
    3. Copper glance
    4. Galena
    Answer and solution

    Answer: B

    The magnetic ore, or magnetic impurity, is pulled off by a magnetic roller. Wolframite is magnetic and is separated from cassiterite, which is not. Sulphides such as ZnS, Cu2S and PbS go through froth flotation.

  23. MCQStandard

    Hydraulic washing (gravity separation) works because the ore particles are
    1. lighter than the gangue
    2. more magnetic than the gangue
    3. heavier than the gangue particles
    4. wetted more by oil
    Answer and solution

    Answer: C

    A stream of water carries off the lighter earthy gangue and leaves the heavier oxide ore, such as haematite or cassiterite, behind.

  24. MCQStandard

    Silver sulphide ore is dissolved by dilute NaCN solution in air, giving
    1. Na3[Ag(CN)4]
    2. AgCN precipitate which does not dissolve
    3. Ag2O
    4. Na[Ag(CN)2]
    Answer and solution

    Answer: D

    Ag2S + 4NaCN → 2Na[Ag(CN)2] + Na2S. Silver is in the +1 state with a linear complex ion. Air is needed to oxidise the sulphide ion so the reaction goes on.

  25. MCQStandard

    Silver is then recovered from the cyanide complex by
    1. displacement with zinc dust
    2. heating with carbon
    3. passing CO2
    4. adding Fe2O3
    Answer and solution

    Answer: A

    2[Ag(CN)2]− + Zn → [Zn(CN)4]2− + 2Ag. Zinc is more electropositive than silver.

  26. MCQStandard

    Which pair is correctly matched with the usual first step?
    1. Zinc blende – calcination
    2. Calamine (ZnCO3) – calcination
    3. Haematite – roasting in excess air to remove sulphur
    4. Cuprite – froth flotation to remove carbonate
    Answer and solution

    Answer: B

    Carbonates are calcined to give the oxide: ZnCO3 → ZnO + CO2. Sulphides such as zinc blende are roasted.

  27. MCQStandard

    Limonite, Fe2O3·xH2O, on calcination gives
    1. Fe3O4 and H2
    2. Fe and H2O2
    3. Fe2O3 and water vapour
    4. FeCO3
    Answer and solution

    Answer: C

    Calcination drives off water of hydration: Fe2O3·xH2O → Fe2O3 + xH2O.

  28. MCQStandard

    Roasting of galena in excess air gives
    1. Pb and SO3
    2. PbSO4 only
    3. PbCO3
    4. PbO and SO2
    Answer and solution

    Answer: D

    2PbS + 3O2 → 2PbO + 2SO2. The oxide is then reduced by carbon, or by unroasted PbS in self-reduction.

  29. MCQStandard

    The gas given off in roasting sulphide ores is poisonous and is usually
    1. trapped and turned into sulphuric acid
    2. used as the reducing agent in the same furnace
    3. released to the air, since it is harmless
    4. condensed to give sulphur dioxide as a solid residue
    Answer and solution

    Answer: A

    SO2 is a pollutant that causes acid rain. Plants convert it to H2SO4 by the contact process.

  30. MCQStandard

    Heating a mixture of Cr2O3 and aluminium powder gives chromium. This is called
    1. the Mond process
    2. the thermite (aluminothermy or Goldschmidt) process
    3. the van Arkel process
    4. cupellation
    Answer and solution

    Answer: B

    Cr2O3 + 2Al → Al2O3 + 2Cr. A lot of heat is given out, as Al has a greater affinity for oxygen than Cr. The same trick joins rails with Fe2O3.

← All topics