Organic chemistry basics (GOC) and isomerism
Class 11 · 293 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Organic chemistry basics (GOC) and isomerism.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The IUPAC name of CH3CH(CH3)CH2CH3 is- 2-methylbutane
- isopentane
- 3-methylbutane
- 1,1-dimethylpropane
Answer and solution
Answer: A
Longest chain: 4 carbons (butane). One methyl branch. Number from the end that gives the lower locant: 2.
Name: 2-methylbutane. "3-methylbutane" numbers from the wrong end; isopentane is a common name.
Why people get this wrong: Always give the branch the lowest number.
-
MCQWarm-up
The functional group in CH3CHO is- ketone, >C=O
- aldehyde, –CHO
- carboxylic acid, –COOH
- ester, –COO–
Answer and solution
Answer: B
A carbonyl group joined to one hydrogen and one carbon is an aldehyde group. A ketone has two carbons on the carbonyl carbon.
-
MCQWarm-up
The hybridisation of each carbon in CH2=CH2 is- sp
- sp3
- sp2
- sp3d
Answer and solution
Answer: C
Each carbon forms three sigma bonds (two C–H, one C–C) and one pi bond. Three sigma bonds means three hybrid orbitals: sp2.
-
MCQWarm-up
Homolytic fission of a covalent bond gives- carbocation and carbanion
- two cations
- two anions
- free radicals
Answer and solution
Answer: D
In homolysis each atom keeps one electron of the shared pair, so each fragment has an unpaired electron: free radicals. Heterolysis gives a cation and an anion.
-
MCQWarm-up
Which of these is an electrophile?- AlCl3
- NH3
- OH-
- H2O
Answer and solution
Answer: A
AlCl3 has an incomplete octet on Al and accepts an electron pair: electrophile (Lewis acid). NH3, OH- and H2O all have lone pairs to donate: nucleophiles.
-
MCQWarm-up
Hyperconjugation is also known as- electromeric effect
- no-bond resonance
- inductive effect
- mesomeric effect
Answer and solution
Answer: B
Hyperconjugation is delocalisation of the electrons of a C–H sigma bond into an adjacent empty or pi orbital. Drawn as structures with no bond between C and H, it is called "no-bond resonance" or Baker-Nathan effect.
-
MCQWarm-up
In Lassaigne's test, nitrogen is detected as a- violet colour
- canary yellow precipitate
- Prussian blue colour
- white curdy precipitate
Answer and solution
Answer: C
Na fusion gives NaCN. With FeSO4 it forms Na4[Fe(CN)6]; on adding Fe3+ and acid, Prussian blue, Fe4[Fe(CN)6]3, forms. Violet is for sulphur, yellow precipitate for phosphorus, white curdy precipitate for chlorine.
-
MCQWarm-up
A carbon atom is chiral (asymmetric) when it is bonded to- four identical groups
- two identical and two different groups
- a double bond and two groups
- four different atoms or groups
Answer and solution
Answer: D
A chiral carbon is sp3 with four different groups. Its mirror image cannot be placed on top of it.
-
MCQWarm-up
The most stable carbocation among these is- (CH3)3C+
- CH3CH2+
- (CH3)2CH+
- CH3+
Answer and solution
Answer: A
Stability rises with the number of alkyl groups on the positive carbon (inductive effect and hyperconjugation). Tertiary is the most stable: 9 alpha-hydrogens, three +I groups.
-
MCQWarm-up
A liquid that decomposes below its boiling point, such as glycerol, is purified by- simple distillation at atmospheric pressure
- distillation under reduced pressure
- sublimation
- steam distillation of a solid
Answer and solution
Answer: B
Lowering the pressure lowers the boiling point, so the liquid boils before it can decompose.
-
MCQWarm-up
The IUPAC name of CH3COOH is- acetic acid, the IUPAC name
- methanoic acid
- ethanoic acid
- ethanal
Answer and solution
Answer: C
Two carbons including the COOH carbon: eth-; the acid ending is –oic acid. Acetic acid is the common name.
-
MCQWarm-up
The number of structural isomers of C4H10 is- 1
- 3
- 4
- 2
Answer and solution
Answer: D
Butane (straight chain) and 2-methylpropane (branched). Nothing else is possible for four carbons and ten hydrogens.
-
MCQWarm-up
Which group shows a +I (electron-releasing) inductive effect relative to hydrogen?- CH3–
- –NO2
- –Cl
- –CN
Answer and solution
Answer: A
Alkyl groups push electrons towards the carbon they are attached to (+I). NO2, Cl and CN are electron-withdrawing (−I).
-
MCQWarm-up
Which species can act as a nucleophile?- BF3
- NH3
- H+
- CH3+
Answer and solution
Answer: B
A nucleophile donates a pair of electrons. NH3 has a lone pair on N. BF3, H+ and CH3+ are electron-poor.
-
MCQWarm-up
Ethanol, CH3CH2OH, and methoxymethane, CH3OCH3, are examples of- chain isomers
- position isomers
- functional isomers
- metamers
Answer and solution
Answer: C
Same molecular formula C2H6O but different functional groups (alcohol and ether).
-
MCQWarm-up
Which of these is purified by sublimation?- Sodium chloride
- Sugar
- Glycerol
- Naphthalene
Answer and solution
Answer: D
Naphthalene (also camphor, anthracene, ammonium chloride, iodine) goes straight from solid to vapour on heating, leaving non-volatile impurities behind.
-
MCQWarm-up
The retention factor Rf of a spot in chromatography can never be- greater than 1
- equal to 0.5
- equal to 0.1
- less than 1
Answer and solution
Answer: A
Rf = distance moved by the substance / distance moved by the solvent front. The substance cannot move further than the solvent, so Rf ≤ 1.
-
NATWarm-up
The degree of unsaturation (double-bond equivalents) of benzene, C6H6, isAnswer and solution
Answer: 4
DoU = (2C + 2 − H)/2 = (12 + 2 − 6)/2 = 4 (three double bonds and one ring).
-
MCQWarm-up
The IUPAC name of CH3CH2CH(OH)CH3 is- butan-2-ol
- butan-3-ol
- 1-methylpropan-1-ol
- butane-2-ol
Answer and solution
Answer: A
Number to give OH the lowest locant: 2. With the suffix -ol the final e of butane is dropped before the vowel o.
Name: butan-2-ol.
-
MCQWarm-up
The IUPAC name of CH3CH2CONH2 is- propanamine
- propanamide
- ethanamide
- aminopropanone
Answer and solution
Answer: B
Three carbons including the C=O carbon; -amide for CONH2.
Name: propanamide.
-
MCQWarm-up
The IUPAC name of CH3CH2OCH2CH3 is- diethyl oxide
- ethylethanol
- ethoxyethane
- methoxypropane
Answer and solution
Answer: C
Ethers are alkoxyalkanes: the smaller alkyl plus O is the alkoxy group, the larger is the parent.
Name: ethoxyethane.
-
MCQStandard
The IUPAC name of CH3CH2CH(CH3)CH2CH3 is- 2-ethylbutane
- 3-methylpentane
- 2-methylpentane
- 3-methylhexane
Answer and solution
Answer: B
Longest chain is 5 carbons by passing through the CH carbon: C1 CH3, C2 CH2, C3 CH(CH3), C4, C5. The methyl sits on C3. "2-Ethylbutane" picks a shorter chain (4 carbons).
Why people get this wrong: Always count the longest chain, even if the drawing bends.
-
MCQStandard
The IUPAC name of the substituent group CH2=CHCH2– (allyl) is- prop-1-en-3-yl
- vinyl
- prop-2-en-1-yl
- prop-1-en-1-yl
Answer and solution
Answer: C
Number the carbon with the free valence as 1: C1 CH2–, C2 CH=, C3 =CH2. The double bond starts at C2: prop-2-en-1-yl. Vinyl is ethenyl, CH2=CH–.
-
MCQStandard
Which order of acidity is correct?- CH3COOH > ClCH2COOH > Cl2CHCOOH > Cl3CCOOH
- ClCH2COOH < CH3COOH < Cl2CHCOOH < Cl3CCOOH
- CH3COOH < Cl3CCOOH < Cl2CHCOOH < ClCH2COOH
- CH3COOH < ClCH2COOH < Cl2CHCOOH < Cl3CCOOH
Answer and solution
Answer: D
Each Cl pulls electrons (−I effect) and stabilises the carboxylate ion, so more Cl atoms mean a stronger acid. pKa: 4.76, 2.86, 1.29, 0.65.
-
MCQStandard
Which carbocation is the most stable?- CH2=CHCH2+
- CH3CH2CH2+
- CH2=CH+
- CH3+
Answer and solution
Answer: A
The allyl cation is stabilised by resonance (the charge is shared between two carbons). The vinyl cation has an empty sp orbital at an sp carbon and is very unstable; the methyl cation has no alkyl groups at all.
-
MCQStandard
The most stable carbanion among these is- CH3CH2-
- CH3-
- (CH3)2CH-
- (CH3)3C-
Answer and solution
Answer: B
Alkyl groups push electrons towards the negative carbon, making it less stable. So the methyl carbanion (no alkyl groups) is the most stable of the alkyl carbanions: CH3- > 1° > 2° > 3°. This is the reverse of carbocation order.
Why people get this wrong: Carbanion order is the reverse of carbocation order.
-
MCQStandard
The correct order of stability of free radicals is- CH3• > CH3CH2• > (CH3)2CH• > (CH3)3C•
- (CH3)2CH• > (CH3)3C• > CH3CH2• > CH3•
- (CH3)3C• > (CH3)2CH• > CH3CH2• > CH3•
- CH3CH2• > (CH3)2CH• > (CH3)3C• > CH3•
Answer and solution
Answer: C
Alkyl groups stabilise an electron-deficient radical by hyperconjugation and +I, so 3° > 2° > 1° > methyl.
-
MCQStandard
Arrange phenol, ethanol, water and acetic acid in decreasing acidity.- C6H5OH > CH3COOH > H2O > C2H5OH
- CH3COOH > C6H5OH > C2H5OH > H2O
- CH3COOH > H2O > C6H5OH > C2H5OH
- CH3COOH > C6H5OH > H2O > C2H5OH
Answer and solution
Answer: D
pKa: acetic acid 4.76, phenol 10, water 15.7, ethanol about 16. The phenoxide ion is stabilised by resonance; the ethoxide ion is destabilised by the +I effect of ethyl.
Why people get this wrong: Ethanol is a slightly weaker acid than water.
-
MCQStandard
In aqueous solution the correct order of basic strength is- (CH3)2NH > CH3NH2 > (CH3)3N > NH3
- (CH3)3N > (CH3)2NH > CH3NH2 > NH3
- CH3NH2 > (CH3)2NH > (CH3)3N > NH3
- NH3 > CH3NH2 > (CH3)2NH > (CH3)3N
Answer and solution
Answer: A
Methyl groups increase electron density on N (+I), but in water the more substituted ammonium ions are less well solvated (fewer N–H for hydrogen bonding). The two effects give 2° > 1° > 3° > NH3 for methylamines (pKb 3.27, 3.38, 4.22, 4.74).
Why people get this wrong: Tertiary methylamine is not the strongest in water.
-
MCQStandard
Which group shows a +M effect (and a −I effect) when attached to a benzene ring?- –NO2
- –OCH3
- –CHO
- –CN
Answer and solution
Answer: B
The oxygen of OCH3 has lone pairs that enter the ring (+M) though O is electronegative and pulls through the sigma bond (−I). NO2, CHO and CN show −M and −I.