Home / Courses / Engineering entrance / Practice / Fluids: pressure, flow, viscosity and surface tension

Fluids: pressure, flow, viscosity and surface tension

Class 11 · 287 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Fluids: pressure, flow, viscosity and surface tension.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    A force of 600 N acts normally on a surface of area 0.03 m2. Find the pressure (in kPa).
    Answer and solution

    Answer: 20 kPa

    P=F/A=600/0.03=2×104 Pa =20 kPa.
  2. MCQWarm-up

    The SI unit of pressure is
    1. newton
    2. pascal (Nm−2)
    3. Nm−1
    4. joule
    Answer and solution

    Answer: B

    Pressure is force per unit area: Nm−2, called the pascal (Pa). Nm−1 is the unit of surface tension, and joule is the unit of energy.
  3. MCQWarm-up

    The pressure due to a liquid of density ρ at depth h (gauge pressure) is
    1. ρgh
    2. ρh/g
    3. ρg/h
    4. 12ρgh
    Answer and solution

    Answer: A

    The liquid column above a unit area has weight ρ(hA)g/A=ρgh.
  4. MCQWarm-up

    Pascal's law states that pressure applied to an enclosed fluid is
    1. transmitted only in the direction of the force
    2. reduced as it travels
    3. transmitted only to the bottom of the container
    4. transmitted undiminished to every part of the fluid and the walls
    Answer and solution

    Answer: D

    Pressure (not force) is passed on equally in all directions. This is how hydraulic lifts and brakes work.
  5. MCQWarm-up

    A hydraulic lift multiplies force because
    1. energy is created in the liquid
    2. the liquid is compressed
    3. the same pressure acts on a larger area at the output piston
    4. the output piston moves farther than the input piston
    Answer and solution

    Answer: C

    P=F1/A1=F2/A2, so F2=F1A2/A1. No energy is created: the large piston moves a smaller distance, so work out = work in.
  6. MCQWarm-up

    A body immersed in a fluid experiences an upward force equal to
    1. the weight of the body
    2. the weight of the fluid displaced
    3. the volume of the body
    4. the density of the fluid
    Answer and solution

    Answer: B

    This is Archimedes' principle: FB=ρfluidVdisplacedg.
  7. MCQWarm-up

    A solid floats in a liquid if its average density is
    1. less than or equal to that of the liquid
    2. greater than that of the liquid
    3. more than twice that of the liquid
    4. unrelated to the liquid's density
    Answer and solution

    Answer: A

    If the body is less dense, buoyancy at full immersion (ρlVg) exceeds its weight (ρsVg), so it rises until the submerged part displaces its weight.
  8. MCQWarm-up

    Standard atmospheric pressure is about
    1. 1.01×103 Pa
    2. 1.01×108 Pa
    3. 9.8×104 Nm−1
    4. 1.01×105 Pa
    Answer and solution

    Answer: D

    One atmosphere is 760 mm of mercury =1.013×105 Pa. Check: 13600×9.8×0.76=1.013×105 Pa.
  9. MCQWarm-up

    Gauge pressure is
    1. the absolute pressure plus the atmospheric pressure
    2. the pressure of the atmosphere only
    3. the absolute pressure minus the atmospheric pressure
    4. the pressure in a perfect vacuum
    Answer and solution

    Answer: C

    A tyre gauge reads the excess over the atmosphere: Pgauge=Pabs−Patm.
  10. MCQWarm-up

    The SI unit of the coefficient of viscosity is
    1. Nm−1
    2. Nsm−2 (Pa s)
    3. Nm−2
    4. kgm−3
    Answer and solution

    Answer: B

    F=ηAdvdx so η=FA(dv/dx) with unit Nm2s−1=Nsm−2= Pa s.
  11. MCQWarm-up

    The SI unit of surface tension is
    1. Nm−1
    2. Nm−2
    3. N m
    4. Nsm−2
    Answer and solution

    Answer: A

    Surface tension is force per unit length of a line on the surface: Nm−1 (equivalently Jm−2).
  12. NATWarm-up

    Water flows at 2 ms−1 in a pipe of cross-section 0.04 m2. The pipe narrows to 0.01 m2. Find the speed of water in the narrow part (in ms−1).
    Answer and solution

    Answer: 8 m/s

    Continuity: A1v1=A2v2, so v2=0.04×2/0.01=8 ms−1.
  13. MCQWarm-up

    In streamline flow of an ideal fluid in a horizontal pipe, where the speed is greater the pressure is
    1. greater
    2. the same
    3. zero
    4. smaller
    Answer and solution

    Answer: D

    P+12ρv2= constant along a horizontal streamline: a larger v means a smaller P.
  14. MCQWarm-up

    The pressure at the bottom of a liquid in vessels of different shapes, all filled to the same height with the same liquid, is
    1. larger in the widest vessel
    2. larger in the narrowest vessel
    3. the same in all of them
    4. larger in the vessel with the greatest volume
    Answer and solution

    Answer: C

    P=ρgh depends only on the depth h and the density, not on the shape or the amount (the hydrostatic paradox).
  15. NATWarm-up

    Find the gauge pressure at the bottom of a lake 10 m deep (in kPa; ρ=1000 kgm−3, g=9.8 ms−2).
    Answer and solution

    Answer: 98 kPa (±0.5)

    P=ρgh=1000×9.8×10=9.8×104 Pa =98 kPa.
  16. MCQWarm-up

    When a clean glass capillary tube is dipped in mercury, the mercury level inside the tube
    1. rises above the outside level
    2. is depressed below the outside level
    3. stays level with the outside
    4. rises, as with water
    Answer and solution

    Answer: B

    Mercury does not wet glass (angle of contact about 135∘, obtuse). The meniscus is convex and the level inside falls. Water wets glass (angle about 0∘) and rises.
  17. MCQWarm-up

    Small liquid drops are spherical in shape because of
    1. surface tension
    2. viscosity
    3. gravity
    4. buoyancy
    Answer and solution

    Answer: A

    Surface tension tries to reduce the surface area. For a fixed volume, the sphere has the least surface area.
  18. MCQWarm-up

    A small ball falling through a viscous liquid reaches a constant (terminal) speed when
    1. the viscous force becomes zero
    2. the weight becomes zero
    3. the buoyant force exceeds the weight
    4. the net force on it becomes zero
    Answer and solution

    Answer: D

    As the speed grows, the viscous drag grows, until weight = buoyancy + drag. The net force is zero, so the acceleration is zero.
  19. MCQWarm-up

    The equation of continuity expresses the conservation of
    1. energy
    2. momentum
    3. mass
    4. angular momentum
    Answer and solution

    Answer: C

    For an incompressible fluid, the volume flowing in per second equals that flowing out: A1v1=A2v2. This is mass conservation. Bernoulli's equation expresses energy conservation.
  20. MCQWarm-up

    The instrument used to measure atmospheric pressure is the
    1. manometer for gases only
    2. hydrometer
    3. viscometer
    4. barometer
    Answer and solution

    Answer: D

    A barometer (for example, the mercury barometer of Torricelli) measures atmospheric pressure. A manometer measures the pressure of a confined gas relative to the atmosphere, a hydrometer measures density, and a viscometer measures viscosity.
  21. MCQWarm-up

    The dimensional formula of surface tension is
    1. MLT−2
    2. ML−1T−2
    3. MT−2
    4. ML2T−2
    Answer and solution

    Answer: C

    Surface tension is force per length: MLT−2/L=MT−2. Equivalently, energy per area: ML2T−2/L2.
  22. NATWarm-up

    An object of volume 2 L is completely immersed in water. Find the buoyant force on it (in N). g=9.8 ms−2.
    Answer and solution

    Answer: 19.6 N (±0.05)

    FB=ρVg=1000×2×10−3×9.8=19.6 N.
  23. MCQWarm-up

    As a submarine goes deeper in the sea, the pressure on its hull
    1. decreases
    2. increases in proportion to the depth
    3. stays the same
    4. increases in proportion to the square of the depth
    Answer and solution

    Answer: B

    P=P0+ρgh is linear in the depth h.
  24. MCQWarm-up

    The viscous force between two layers of a flowing fluid
    1. opposes the relative motion of the layers
    2. helps the relative motion of the layers
    3. acts perpendicular to the layers
    4. is zero for all real fluids
    Answer and solution

    Answer: A

    A faster layer drags the slower one forward, and the slower layer drags the faster one back: the force is tangential and opposes the relative motion.
  25. MCQWarm-up

    The flow of a liquid is said to be streamline (laminar) when
    1. the particles move in random directions
    2. the speed is very high
    3. the liquid is very viscous only
    4. every particle passing a given point follows the same path with the same velocity
    Answer and solution

    Answer: D

    In steady streamline flow, the velocity at any fixed point does not change in time, and the particles follow smooth, non-crossing paths.
  26. MCQWarm-up

    A small insect can walk on water because of
    1. buoyancy only
    2. viscosity of water
    3. surface tension
    4. low density of water
    Answer and solution

    Answer: C

    The water surface behaves like a stretched elastic film. The vertical component of the surface tension force supports the insect's weight.
  27. NATStandard

    In a hydraulic lift the small piston has an area of 20 cm2 and the large piston 0.2 m2. What force (in kN) on the small piston lifts a load of 15 kN on the large one?
    Answer and solution

    Answer: 0.15 kN (±0.005)

    F1/A1=F2/A2. F1=15×20×10−40.2=15×0.01=0.15 kN. (The load 15 kN is F2.)

    Why people get this wrong: Convert cm2 to m2 before the ratio.

  28. MCQStandard

    The absolute pressure at a depth of 20 m in a lake (atmospheric pressure 1.013×105 Pa, g=9.8 ms−2) is
    1. 1.96 ×105 Pa
    2. 2.97 ×105 Pa
    3. 2.03 ×105 Pa
    4. 1.11 ×105 Pa
    Answer and solution

    Answer: B

    P=P0+ρgh=1.013×105+1000×9.8×20=1.013×105+1.96×105=2.97×105 Pa.

    Why people get this wrong: Add the atmosphere for the absolute pressure.

  29. MCQStandard

    If water were used instead of mercury (density 13600 kgm−3) in a barometer at 760 mm Hg, the water column would be about
    1. 10.3 m
    2. 0.76 m
    3. 13.6 m
    4. 760 m
    Answer and solution

    Answer: A

    Same pressure: ρwhw=ρHghHg. hw=13.6×0.76=10.3 m.
  30. NATStandard

    An open U-tube manometer holds water. The liquid is 20 cm higher in the open arm than in the arm connected to a gas. Find the gauge pressure of the gas (in Pa). g=9.8 ms−2.
    Answer and solution

    Answer: 1960 Pa

    The gas pushes its own arm down, so its level is lower and the open arm's level is higher. Compare two points at the same level (the gas-side surface): pressure there is Pgas on one side and P0+ρgh on the other. So Pgauge=ρgh=1000×9.8×0.2=1960 Pa.

← All topics