Home / Courses / Engineering entrance / Practice / d- and f-block elements

d- and f-block elements

Class 12 · 351 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: d- and f-block elements.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    Find the oxidation state of Ti in TiO2.
    Answer and solution

    Answer: 4

    Set the sum of oxidation states to the overall charge: x + 2(-2) = 0.

    So the oxidation state of Ti is +4.

  2. MCQWarm-up

    The ground-state electronic configuration of chromium (Z = 24) is
    1. [Ar] 3d5 4s1
    2. [Ar] 3d4 4s2
    3. [Ar] 3d6
    4. [Ar] 4s2 4p4
    Answer and solution

    Answer: A

    Chromium is an exception: moving one 4s electron into 3d gives a half-filled 3d5 subshell, which is extra stable because of exchange energy and symmetry. The regular 3d44s2 is therefore not the ground state.

  3. MCQWarm-up

    Copper (Z = 29) has the configuration
    1. [Ar] 3d9 4s2
    2. [Ar] 3d10 4s1
    3. [Ar] 3d8 4s2 4p1
    4. [Ar] 3d10
    Answer and solution

    Answer: B

    A completely filled 3d10 subshell is more stable, so one 4s electron moves into 3d. This is the second exception in the 3d series (the first is Cr).

  4. MCQWarm-up

    The general outer electronic configuration of d-block elements is
    1. (n-2)f1-14 (n-1)d0-1 ns2
    2. ns2 np1-6
    3. (n-1)d1-10 ns1-2
    4. (n-1)d1-10 ns2 only
    Answer and solution

    Answer: C

    d-block: (n-1)d1-10 ns1-2 (Pd is 4d105s0 as an exception). The second option is the f-block. "ns2 only" fails for Cr and Cu.

  5. MCQWarm-up

    Which of the following is NOT considered a transition element by the IUPAC definition?
    1. Fe
    2. Cu
    3. Ni
    4. Zn
    Answer and solution

    Answer: D

    A transition element has a partly filled d subshell in the atom or in at least one common ion. Zn (3d104s2) and Zn2+ (3d10) both have full d subshells. Cu2+ is d9, so copper qualifies.

  6. MCQWarm-up

    In the inner transition elements the last electron enters the
    1. (n-2)f subshell
    2. (n-1)d subshell
    3. ns subshell
    4. np subshell
    Answer and solution

    Answer: A

    Lanthanoids fill 4f; actinoids fill 5f. These are the inner transition (f-block) elements.

  7. MCQWarm-up

    Across the 3d series from Sc to Zn the atomic radii
    1. first decrease, then stay nearly constant, and increase slightly at the end
    2. increase steadily
    3. decrease steadily
    4. remain exactly constant
    Answer and solution

    Answer: A

    Nuclear charge rises, but extra electrons enter the inner 3d subshell and shield the 4s electrons. In the middle the two effects balance (radii nearly constant). At Cu and Zn, d-d repulsion in the filled d subshell expands the atom slightly.

  8. MCQWarm-up

    The most common oxidation state of the 3d metals (excluding Sc) is
    1. +1
    2. +2
    3. +3
    4. +7
    Answer and solution

    Answer: B

    The two 4s electrons are lost most easily, giving +2. Scandium is +3 and Zn is +2 only.

  9. MCQWarm-up

    A substance that is attracted by a magnetic field because of unpaired electrons is called
    1. paramagnetic
    2. diamagnetic
    3. ferrimagnetic only
    4. non-magnetic
    Answer and solution

    Answer: A

    Unpaired electrons give permanent magnetic moments, so the substance is drawn into the field: paramagnetic. Diamagnetic substances (all electrons paired) are weakly repelled.

  10. MCQWarm-up

    The starting material for the preparation of potassium permanganate is
    1. haematite, Fe2O3
    2. chromite, FeCr2O4
    3. cinnabar, HgS
    4. pyrolusite, MnO2
    Answer and solution

    Answer: D

    MnO2 is fused with KOH in air (or with KNO3) to give green K2MnO4, which is then oxidised to KMnO4.

  11. MCQWarm-up

    Potassium dichromate is prepared from the ore
    1. pyrolusite, MnO2
    2. chromite, FeCr2O4
    3. bauxite, Al2O3
    4. galena, PbS
    Answer and solution

    Answer: B

    Chromite is fused with sodium carbonate in excess air to give sodium chromate, which is acidified to sodium dichromate and then converted to potassium dichromate.

  12. MCQWarm-up

    The lanthanoids are the elements with atomic numbers
    1. 89 to 103
    2. 21 to 30
    3. 39 to 48
    4. 58 to 71, following lanthanum
    Answer and solution

    Answer: D

    Ce (58) to Lu (71) fill the 4f subshell. Actinoids are 90 to 103.

  13. MCQWarm-up

    The actinoids are the elements from
    1. Ce (58) to Lu (71)
    2. Th (90) to Lr (103), in which the 5f subshell is filled
    3. Sc (21) to Zn (30)
    4. Y (39) to Cd (48)
    Answer and solution

    Answer: B

    Actinium (89) starts the series; Th to Lr fill 5f. All actinoids are radioactive.

  14. MCQWarm-up

    Iron, copper and zinc all belong to the
    1. s-block
    2. p-block
    3. d-block
    4. f-block
    Answer and solution

    Answer: C

    Elements whose last electron enters a d subshell form the d-block (groups 3 to 12). Zn is in the d-block but is not a transition element.

  15. MCQWarm-up

    The colour of an aqueous solution of potassium permanganate is
    1. orange
    2. green
    3. colourless
    4. purple
    Answer and solution

    Answer: D

    MnO4- is intensely purple. Dichromate is orange, manganate is green, and Mn2+ is almost colourless.

  16. MCQWarm-up

    Aqueous potassium dichromate in acid is
    1. orange
    2. yellow
    3. purple
    4. blue
    Answer and solution

    Answer: A

    Cr2O72- is orange. Chromate CrO42- (alkaline) is yellow.

  17. MCQWarm-up

    Which of these is a lanthanoid?
    1. uranium (U)
    2. cerium (Ce)
    3. iron (Fe)
    4. copper (Cu)
    Answer and solution

    Answer: B

    Ce (Z = 58) is a lanthanoid. U is an actinoid; Fe and Cu are d-block elements.

  18. MCQWarm-up

    Which of these is an actinoid?
    1. cerium (Ce)
    2. lanthanum (La)
    3. uranium (U)
    4. lutetium (Lu)
    Answer and solution

    Answer: C

    U (Z = 92) fills the 5f subshell and is an actinoid. Ce and Lu are lanthanoids; La is the element that heads the lanthanoid series.

  19. MCQWarm-up

    Which d-block metal is a liquid at room temperature?
    1. zinc
    2. cadmium
    3. copper
    4. mercury
    Answer and solution

    Answer: D

    Mercury (melting point -39 °C) is liquid, because its filled d10s2 shell gives very weak metallic bonding.

  20. MCQWarm-up

    The catalyst used in the manufacture of ammonia by the Haber process is
    1. finely divided iron
    2. platinum gauze
    3. V2O5
    4. nickel
    Answer and solution

    Answer: A

    Haber: N2 + 3H2 → 2NH3 over iron (with promoters such as Mo or K2O).

  21. MCQWarm-up

    Which one of these is NOT a member of the 3d series?
    1. V
    2. Ca
    3. Fe
    4. Ni
    Answer and solution

    Answer: B

    The 3d series runs from Sc (21) to Zn (30). Ca (Z = 20) is an s-block element.

  22. MCQWarm-up

    The unit commonly used for magnetic moment is
    1. tesla
    2. ohm
    3. Bohr magneton (BM)
    4. coulomb
    Answer and solution

    Answer: C

    The Bohr magneton is the natural unit for the magnetic moment of electrons (1 BM = 9.27 × 10-24 J/T). Tesla measures field strength.

  23. NATWarm-up

    What is the highest oxidation state of manganese?
    Answer and solution

    Answer: 7

    Mn has 3d54s2: 7 valence electrons, so the highest state is +7 (KMnO4, Mn2O7).

  24. NATWarm-up

    How many unpaired electrons does Zn2+ have?
    Answer and solution

    Answer: 0

    Zn2+ is 3d10: all electrons are paired, so 0.

  25. NATWarm-up

    How many 3d electrons are present in a ground-state Cr atom?
    Answer and solution

    Answer: 5

    Cr is 3d54s1: 5 electrons in 3d.

  26. NATStandard

    How many electrons are in the 3d subshell of Ti3+? (Atomic number of Ti = 22.)
    Answer and solution

    Answer: 1

    Atom: [Ar] 3d2 4s2. For a 3d metal the 4s electrons are lost first, then 3d.

    Ti3+: remove 3 electrons: 2 from 4s and 1 from 3d, leaving 3d1. Answer: 1.

    Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.

  27. NATStandard

    How many electrons are in the 3d subshell of Mn2+? (Atomic number of Mn = 25.)
    Answer and solution

    Answer: 5

    Atom: [Ar] 3d5 4s2. For a 3d metal the 4s electrons are lost first, then 3d.

    Mn2+: remove 2 electrons: all 2 come from 4s, leaving 3d5. Answer: 5.

    Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.

  28. NATStandard

    How many electrons are in the 3d subshell of Fe3+? (Atomic number of Fe = 26.)
    Answer and solution

    Answer: 5

    Atom: [Ar] 3d6 4s2. For a 3d metal the 4s electrons are lost first, then 3d.

    Fe3+: remove 3 electrons: 2 from 4s and 1 from 3d, leaving 3d5. Answer: 5.

    Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.

  29. NATStandard

    How many electrons are in the 3d subshell of Co2+? (Atomic number of Co = 27.)
    Answer and solution

    Answer: 7

    Atom: [Ar] 3d7 4s2. For a 3d metal the 4s electrons are lost first, then 3d.

    Co2+: remove 2 electrons: all 2 come from 4s, leaving 3d7. Answer: 7.

    Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.

  30. NATStandard

    How many electrons are in the 3d subshell of Ni2+? (Atomic number of Ni = 28.)
    Answer and solution

    Answer: 8

    Atom: [Ar] 3d8 4s2. For a 3d metal the 4s electrons are lost first, then 3d.

    Ni2+: remove 2 electrons: all 2 come from 4s, leaving 3d8. Answer: 8.

    Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.

← All topics