Home / Courses / Engineering entrance / Practice / Chemical kinetics

Chemical kinetics

Class 12 · 247 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Chemical kinetics.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The rate of a chemical reaction is best defined as
    1. the change in concentration of a reactant or product per unit time
    2. the total amount of product formed at the end
    3. the time taken for the reaction to start
    4. the energy released per mole of reactant
    Answer and solution

    Answer: A

    Rate = -Δ[reactant]/Δt = +Δ[product]/Δt. It tells how fast concentration changes, not how much product finally forms (that is yield) nor energy (that is enthalpy).

  2. MCQWarm-up

    The usual unit of the rate of a reaction in solution is
    1. s-1
    2. mol L-1 s-1
    3. L mol-1 s-1
    4. mol s
    Answer and solution

    Answer: B

    Rate is concentration (mol L-1) divided by time (s), so mol L-1 s-1. The other units belong to rate constants of first and second order reactions.

  3. MCQWarm-up

    For the rate law rate = k[A]2[B], the overall order of the reaction is
    1. 2
    2. 1
    3. 3
    4. 4
    Answer and solution

    Answer: C

    Overall order is the sum of the powers of the concentrations in the rate law: 2 + 1 = 3. The order is read from the rate law, not from the balanced equation.

  4. MCQWarm-up

    Molecularity of an elementary reaction
    1. can be zero
    2. can be a fraction such as 1/2
    3. is always equal to the sum of the stoichiometric coefficients of the overall reaction
    4. is always a whole number, never zero or fractional
    Answer and solution

    Answer: D

    Molecularity is the number of reacting species colliding in one elementary step: 1, 2 or (rarely) 3. It is a whole number. It applies to a single step, not to a multi-step reaction as a whole.

  5. MCQWarm-up

    The unit of the rate constant of a first order reaction is
    1. s-1
    2. mol L-1 s-1
    3. L mol-1 s-1
    4. mol2 L-2 s-1
    Answer and solution

    Answer: A

    For first order, rate = k[A], so k = rate/[A] = (mol L-1 s-1)/(mol L-1) = s-1.

  6. NATWarm-up

    A first order reaction has k = 0.0693 min-1. Find its half-life in minutes. (ln 2 = 0.693)
    Answer and solution

    Answer: 10 min

    For first order, t1/2 = 0.693/k = 0.693/0.0693 = 10 min.

  7. NATWarm-up

    The rate law of a reaction is rate = k[A][B]2. What is the overall order?
    Answer and solution

    Answer: 3

    Add the powers: 1 + 2 = 3.

  8. MCQWarm-up

    The Arrhenius equation is
    1. k = A eEa/RT
    2. k = A e-Ea/RT
    3. k = A e-RT/Ea
    4. k = Ea e-A/RT
    Answer and solution

    Answer: B

    k = A e-Ea/RT, where A is the frequency (pre-exponential) factor. The negative sign means higher activation energy gives a smaller k, and higher T gives a larger k.

  9. MCQWarm-up

    A catalyst increases the rate of a reaction by
    1. increasing the temperature of the system
    2. increasing the enthalpy change of the reaction
    3. providing a path with lower activation energy
    4. shifting the equilibrium towards the products
    Answer and solution

    Answer: C

    A catalyst offers an alternative route with a lower Ea, so more molecules cross the barrier. It does not change ΔH or the equilibrium constant, and it is not used up.

  10. MCQWarm-up

    For a zero order reaction, the half-life
    1. is independent of the initial concentration
    2. is inversely proportional to the initial concentration
    3. is proportional to the square of the initial concentration
    4. is directly proportional to the initial concentration
    Answer and solution

    Answer: D

    For zero order t1/2 = [A]0/(2k). More starting material takes longer to be halved at a constant rate.

  11. MCQWarm-up

    For most reactions near room temperature, a 10 K rise in temperature makes the rate about
    1. two to three times larger
    2. ten times larger
    3. half as large
    4. unchanged
    Answer and solution

    Answer: A

    The temperature coefficient (rate at T + 10 over rate at T) is typically 2 to 3, as described in the Arrhenius equation. This is a rule of thumb, not an exact law.

  12. MCQWarm-up

    According to collision theory, a collision leads to reaction only if the molecules have
    1. equal speeds and equal masses
    2. energy at least equal to the threshold energy and the proper orientation
    3. proper orientation only
    4. energy equal to the activation energy of the reverse reaction
    Answer and solution

    Answer: B

    Effective collisions need (i) enough energy (at least the threshold energy) and (ii) the right orientation. Most collisions fail one or both tests.

  13. MCQWarm-up

    Radioactive decay follows
    1. zero order kinetics
    2. second order kinetics
    3. first order kinetics
    4. no fixed order
    Answer and solution

    Answer: C

    The decay rate is proportional to the number of undecayed nuclei, -dN/dt = λN, which is the first order law. That is why every radioactive nuclide has a fixed half-life.

  14. NATWarm-up

    For 2A → B, the rate of disappearance of A is 0.04 mol L-1 s-1. Find the rate of reaction, defined as -½ d[A]/dt, in mol L-1 s-1.
    Answer and solution

    Answer: 0.02 mol L<sup>-1</sup> s<sup>-1</sup> (±0.001)

    Rate of reaction = -(1/2) d[A]/dt = 0.04/2 = 0.02. Dividing by the stoichiometric coefficient gives one common rate.

  15. MCQWarm-up

    In a multi-step reaction the overall rate is controlled by
    1. the fastest step
    2. the last step
    3. the step with the most reactants
    4. the slowest step
    Answer and solution

    Answer: D

    Like the narrowest part of a pipe, the slowest elementary step (the rate-determining step) sets the overall rate.

  16. MCQWarm-up

    The unit of the rate constant of a zero order reaction is
    1. mol L-1 s-1
    2. s-1
    3. L mol-1 s-1
    4. it has no unit
    Answer and solution

    Answer: A

    For zero order, rate = k, so k has the same unit as rate: mol L-1 s-1.

  17. NATStandard

    A first order reaction has a half-life of 20 min. Find the rate constant in min-1.
    Answer and solution

    Answer: 0.0347 min<sup>-1</sup> (±0.0005)

    k = 0.693/t1/2 = 0.693/20 = 0.0347 min-1.

  18. NATStandard

    The half-life of a first order reaction is 10 min. How long does it take for 75 % of the reactant to be consumed?
    Answer and solution

    Answer: 20 min

    75 % consumed leaves 25 % = 1/4, which is two half-lives.

    t = 2 × 10 = 20 min.

  19. NATStandard

    In a first order reaction 20 % of the reactant decomposes in 10 min. Find k in min-1. (log 1.25 = 0.0969)
    Answer and solution

    Answer: 0.0223 min<sup>-1</sup> (±0.0005)

    [A]0 = 100, [A] = 80. k = (2.303/t) log([A]0/[A]) = (2.303/10) log(100/80).

    = 0.2303 × 0.0969 = 0.0223 min-1.

    Why people get this wrong: Use the amount left (80), not the amount reacted (20).

  20. NATStandard

    For a zero order reaction [A]0 = 0.80 M and k = 0.020 mol L-1 s-1. Find the half-life in seconds.
    Answer and solution

    Answer: 20 s

    For zero order t1/2 = [A]0/(2k) = 0.80/(2 × 0.020) = 20 s.

    Why people get this wrong: Do not use 0.693/k here.

  21. NATStandard

    In an experiment, doubling [A] doubles the rate and doubling [B] quadruples the rate. What is the overall order of the reaction?
    Answer and solution

    Answer: 3

    Rate ∝ [A]1 since 21 = 2. Rate ∝ [B]2 since 22 = 4.

    Overall order = 1 + 2 = 3.

  22. NATStandard

    A second order reaction (one reactant) has k = 0.50 L mol-1 s-1 and [A]0 = 0.20 M. Find t1/2 in seconds.
    Answer and solution

    Answer: 10 s

    For second order t1/2 = 1/(k[A]0) = 1/(0.50 × 0.20) = 10 s.

  23. NATStandard

    The slope of a plot of ln k versus 1/T is -6000 K. Find the activation energy in kJ/mol (R = 8.314 J mol-1 K-1).
    Answer and solution

    Answer: 49.9 kJ/mol (±0.2)

    Slope = -Ea/R, so Ea = 6000 × 8.314 = 49884 J = 49.9 kJ/mol.

    Why people get this wrong: The slope is -Ea/R for ln k; for log10 k it is -Ea/2.303R.

  24. NATStandard

    The rate law is rate = k[A]2. By what factor does the rate change if [A] is tripled?
    Answer and solution

    Answer: 9

    Rate ∝ [A]2, so tripling [A] multiplies the rate by 32 = 9.

  25. NATStandard

    For the gas phase reaction 2A + B → products with rate = k[A]2[B], the volume of the container is suddenly halved. By what factor does the rate change?
    Answer and solution

    Answer: 8

    Halving the volume doubles every concentration. Rate ∝ [A]2[B]: 22 × 2 = 8.

    Why people get this wrong: Both concentrations double, not just one.

  26. MCQStandard

    For a first order reaction A → products, a straight line is obtained by plotting
    1. [A] against t, with slope -k
    2. ln[A] against t, with slope -k
    3. 1/[A] against t, with slope k
    4. ln[A] against 1/t, with slope k
    Answer and solution

    Answer: B

    First order: ln[A] = ln[A]0 - kt, a straight line with slope -k. A plot of [A] against t is a decaying curve; 1/[A] against t is the straight line for second order.

  27. MCQStandard

    For a second order reaction (rate = k[A]2), the straight-line plot is
    1. ln[A] against t
    2. [A] against t
    3. 1/[A] against t, with positive slope k
    4. 1/[A]2 against t
    Answer and solution

    Answer: C

    Integrated second order law: 1/[A] = 1/[A]0 + kt. So 1/[A] rises linearly with t, and the slope is +k.

  28. MCQStandard

    For a zero order reaction, the concentration of reactant plotted against time gives
    1. an exponential decay curve
    2. a horizontal line
    3. a hyperbola
    4. a straight line with negative slope equal to -k
    Answer and solution

    Answer: D

    Zero order: [A] = [A]0 - kt, which is a straight line with slope -k. It runs out of reactant in time [A]0/k.

  29. NATStandard

    A radioactive sample of 64 g has a half-life of 6 h. What mass remains after 24 h?
    Answer and solution

    Answer: 4 g

    24 h = 4 half-lives. Mass = 64 × (1/2)4 = 64/16 = 4 g.

  30. MCQStandard

    For an elementary reaction step, which statement is correct?
    1. The order equals the molecularity
    2. The order is always zero
    3. The order is always one more than the molecularity
    4. Molecularity can be fractional but order cannot
    Answer and solution

    Answer: A

    An elementary step happens exactly as written, so its rate law follows from its coefficients: a bimolecular step 2A → P is second order. For a complex reaction the order is found by experiment and can differ from molecularity.

← All topics