Home / Courses / Engineering entrance / Practice / Chemical equilibrium

Chemical equilibrium

Class 11 · 180 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Chemical equilibrium.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    At chemical equilibrium in a closed vessel,
    1. the forward and backward reactions have stopped
    2. the concentrations of reactants and products are equal
    3. the rates of the forward and backward reactions are equal
    4. the reaction is complete
    Answer and solution

    Answer: C

    Equilibrium is dynamic: both reactions go on, at equal rates, so concentrations stay constant. They are constant, not necessarily equal.

  2. MCQWarm-up

    For N2(g) + 3H2(g) ⇌ 2NH3(g), the expression for Kc is
    1. [NH3] / ([N2][H2])
    2. [N2][H2]3 / [NH3]2
    3. 2[NH3] / ([N2] 3[H2])
    4. [NH3]2 / ([N2][H2]3)
    Answer and solution

    Answer: D

    Products on top, reactants below, each raised to the power of its coefficient. Option B is Kc for the reverse reaction.

  3. MCQWarm-up

    For CaCO3(s) ⇌ CaO(s) + CO2(g), Kc is
    1. [CO2]
    2. [CaO][CO2] / [CaCO3]
    3. [CaO] / [CaCO3]
    4. 1 / [CO2]
    Answer and solution

    Answer: A

    The concentration of a pure solid or liquid is constant and is taken as 1 in K, so only the gas appears: Kc = [CO2] and Kp = p(CO2).

  4. MCQWarm-up

    A catalyst added to a reaction at equilibrium
    1. increases K
    2. speeds up both forward and backward reactions equally and does not change K
    3. shifts the equilibrium towards products
    4. decreases the activation energy of the forward reaction only
    Answer and solution

    Answer: B

    A catalyst lowers the activation energy of both directions by the same amount, so equilibrium is reached sooner but its position and K are unchanged.

  5. MCQWarm-up

    The value of the equilibrium constant of a reaction depends on
    1. pressure only
    2. initial concentrations
    3. temperature only
    4. the presence of a catalyst
    Answer and solution

    Answer: C

    For a given reaction K changes only with temperature. Concentration, pressure, volume or a catalyst may change the composition or the speed but not K.

  6. MCQWarm-up

    If the reaction quotient Q is greater than K, the reaction proceeds
    1. in the forward direction
    2. with no change
    3. only if a catalyst is added
    4. in the backward direction
    Answer and solution

    Answer: D

    Q > K means there are too many products compared with equilibrium, so products are used up and the net reaction goes backward until Q = K.

  7. MCQWarm-up

    For which reaction is Kp equal to Kc?
    1. H2(g) + I2(g) ⇌ 2HI(g)
    2. N2(g) + 3H2(g) ⇌ 2NH3(g)
    3. PCl5(g) ⇌ PCl3(g) + Cl2(g)
    4. 2SO2(g) + O2(g) ⇌ 2SO3(g)
    Answer and solution

    Answer: A

    Kp = Kc(RT)Δng. They are equal only if Δng = 0. Only H2 + I2 ⇌ 2HI has 2 mol of gas on each side.

  8. MCQWarm-up

    For N2(g) + 3H2(g) ⇌ 2NH3(g), increasing the pressure by reducing the volume
    1. shifts the equilibrium to the left
    2. shifts the equilibrium to the right
    3. does not shift the equilibrium
    4. changes the value of K
    Answer and solution

    Answer: B

    The system opposes a rise in pressure by reducing the number of gas moles: 4 mol on the left, 2 mol on the right. So the equilibrium moves right (more NH3). K is unchanged.

  9. MCQWarm-up

    On heating, the equilibrium of an endothermic reaction
    1. shifts towards the reactants
    2. does not change
    3. shifts towards the products
    4. is destroyed
    Answer and solution

    Answer: C

    Heat is like a reactant for an endothermic reaction. Adding heat favours the forward direction, which absorbs it, and K increases.

  10. MCQWarm-up

    The unit of Kc for N2O4(g) ⇌ 2NO2(g) is
    1. mol-1 L
    2. it has no unit
    3. mol2 L-2
    4. mol L-1
    Answer and solution

    Answer: D

    Kc = [NO2]2/[N2O4] has units (mol L-1)2-1 = mol L-1. The unit is (mol L-1)Δn.

  11. MCQWarm-up

    A very large value of K (for example 1010) means that at equilibrium
    1. products are strongly favoured
    2. reactants are strongly favoured
    3. the reaction is very fast
    4. the reaction has stopped
    Answer and solution

    Answer: A

    K is products over reactants, so a big K means mostly products. It says nothing about speed (that is rate and activation energy).

    Why people get this wrong: K tells where the equilibrium lies, not how fast it is reached.

  12. MCQWarm-up

    Which statement about the equilibrium H2 + I2 ⇌ 2HI in a closed vessel is not correct?
    1. The colour of the mixture stays constant
    2. [H2] must equal [HI]
    3. The same equilibrium can be reached starting from pure HI
    4. The forward and backward rates are equal
    Answer and solution

    Answer: B

    Equilibrium needs constant concentrations, not equal ones. Starting from H2 and I2 or from HI alone gives the same equilibrium mixture at the same temperature.

  13. NATStandard

    At equilibrium for H2(g) + I2(g) ⇌ 2HI(g): [H2] = 0.10, [I2] = 0.10 and [HI] = 0.80 mol L-1. Find Kc.
    Answer and solution

    Answer: 64

    Kc = [HI]2/([H2][I2]) = 0.64 / (0.10 × 0.10) = 64. No unit since Δn = 0.

    Why people get this wrong: Forgetting to square [HI] gives 80.

  14. NATStandard

    For H2 + I2 ⇌ 2HI, Kc = 64 at a certain temperature. Find Kc for 2HI ⇌ H2 + I2 at the same temperature.
    Answer and solution

    Answer: 0.0156 (±0.0005)

    Reversing a reaction inverts K: K′ = 1/64 = 0.0156.

  15. MCQStandard

    For N2 + 3H2 ⇌ 2NH3 the constant is K. For ½N2 + 3/2 H2 ⇌ NH3 at the same temperature it is
    1. K/2
    2. 2K
    3. √K
    4. K2
    Answer and solution

    Answer: C

    Multiplying all coefficients by n raises K to the power n. Here n = 1/2, so K′ = K1/2.

  16. NATStandard

    For N2O4(g) ⇌ 2NO2(g), Kc = 0.040 mol L-1 at 400 K. Find Kp in atm. (R = 0.0821 L atm K-1 mol-1)
    Answer and solution

    Answer: 1.31 atm (±0.02)

    Kp = Kc(RT)Δng, with Δng = 2 - 1 = 1.

    Kp = 0.040 × 0.0821 × 400 = 1.31 atm.

  17. MCQStandard

    For H2 + I2 ⇌ 2HI, Kc = 50. A mixture has [H2] = [I2] = 0.20 and [HI] = 1.2 mol L-1. The mixture
    1. is not at equilibrium and moves backward
    2. is at equilibrium
    3. has Q = 6
    4. is not at equilibrium and moves forward
    Answer and solution

    Answer: D

    Q = (1.2)2/(0.20 × 0.20) = 1.44/0.04 = 36. Since Q (36) < K (50), more HI must form: the net reaction goes forward.

  18. NATStandard

    PCl5(g) ⇌ PCl3(g) + Cl2(g) is 40% dissociated at a total pressure of 2.1 atm. Find Kp in atm.
    Answer and solution

    Answer: 0.4 atm (±0.01)

    Start with 1 mol PCl5. At equilibrium: PCl5 0.6, PCl3 0.4, Cl2 0.4; total 1.4 mol.

    Partial pressures: 0.6/1.4 × 2.1 = 0.9; 0.4/1.4 × 2.1 = 0.6 each.

    Kp = (0.6 × 0.6)/0.9 = 0.40 atm. (Formula: α2P/(1 - α2) = 0.16 × 2.1/0.84.)

  19. NATStandard

    The theoretical vapour density of PCl5 is 104.25. At a certain temperature the observed vapour density of its equilibrium mixture is 80.19. Find the degree of dissociation.
    Answer and solution

    Answer: 0.3 (±0.01)

    For PCl5 ⇌ PCl3 + Cl2, one mole gives 1 + α moles, so the density falls: D/d = 1 + α.

    α = (D - d)/d = (104.25 - 80.19)/80.19 = 0.30.

    Why people get this wrong: Dividing by D instead of d gives 0.23.

  20. MCQStandard

    CaCO3(s) is in equilibrium with CaO(s) and CO2(g) in a closed vessel at constant temperature. If more CaCO3(s) is added, the pressure of CO2
    1. does not change
    2. increases
    3. decreases
    4. first falls and then rises
    Answer and solution

    Answer: A

    Kp = p(CO2), and Kp depends only on temperature. Pure solids do not appear in K, so adding more solid does not shift the equilibrium. p(CO2) stays the same.

    Why people get this wrong: The famous misconception: adding any reactant shifts the equilibrium; not a solid.

  21. MCQStandard

    In N2(g) + 3H2(g) ⇌ 2NH3(g) at equilibrium, extra H2 is added at constant volume and temperature. Afterwards
    1. more NH3 is formed and K increases
    2. more NH3 is formed and K is unchanged
    3. NH3 decreases and K decreases
    4. nothing changes, as the system is at equilibrium
    Answer and solution

    Answer: B

    Adding H2 makes Q < K, so the net reaction moves forward until Q = K again. K itself depends only on temperature.

  22. MCQStandard

    For PCl5(g) ⇌ PCl3(g) + Cl2(g), when the volume of the vessel is reduced at constant temperature, the degree of dissociation
    1. increases
    2. stays the same
    3. decreases
    4. becomes zero
    Answer and solution

    Answer: C

    Less volume means higher pressure. The system moves to the side with fewer gas moles: 1 mol (PCl5) against 2 mol. So the equilibrium shifts back and α falls.

  23. NATStandard

    0.20 mol L-1 N2O4 is placed in a vessel. At equilibrium [NO2] = 0.080 mol L-1. Find Kc for N2O4 ⇌ 2NO2 in mol L-1.
    Answer and solution

    Answer: 0.04 mol L<sup>-1</sup> (±0.001)

    [NO2] = 2x = 0.080, so x = 0.040. [N2O4] = 0.20 - 0.040 = 0.16.

    Kc = (0.080)2/0.16 = 0.0064/0.16 = 0.040.

    Why people get this wrong: Using 0.080 as the amount of N2O4 that reacted.

  24. NATStandard

    One mole each of H2 and I2 are heated in a 1 L vessel. Kc for H2 + I2 ⇌ 2HI is 4.0 at that temperature. Find the amount of HI (mol) at equilibrium.
    Answer and solution

    Answer: 1 mol (±0.02)

    Let x mol of each react: [HI] = 2x, [H2] = [I2] = 1 - x.

    (2x)2/(1 - x)2 = 4, so 2x/(1 - x) = 2 and x = 0.5. HI = 2x = 1.0 mol.

  25. MCQStandard

    The formation of NH3 is exothermic. A moderate temperature (about 700 K) is used in industry because
    1. high temperature increases K
    2. a catalyst works only at high temperature
    3. NH3 is decomposed at 300 K
    4. low temperature favours yield but makes the reaction too slow
    Answer and solution

    Answer: D

    A compromise: lowering temperature raises K and the yield, but the rate becomes too slow. About 700 K with an iron catalyst gives a fair rate and acceptable yield.

  26. MCQStandard

    The unit of Kp for N2(g) + 3H2(g) ⇌ 2NH3(g), pressures in atm, is
    1. atm-2
    2. atm2
    3. atm
    4. no unit
    Answer and solution

    Answer: A

    Kp = p(NH3)2/(p(N2)p(H2)3) has units atm2-4 = atm-2.

  27. NATStandard

    Solid NH4HS decomposes: NH4HS(s) ⇌ NH3(g) + H2S(g). At equilibrium in a vessel the total pressure is 0.80 atm. Find Kp in atm2.
    Answer and solution

    Answer: 0.16 atm<sup>2</sup> (±0.005)

    NH3 and H2S are formed in equal amounts, so each has a partial pressure of 0.40 atm.

    Kp = 0.40 × 0.40 = 0.16 atm2.

    Why people get this wrong: Using 0.80 for each gas gives 0.64.

  28. NATStandard

    Ammonium carbamate decomposes: NH2COONH4(s) ⇌ 2NH3(g) + CO2(g). At equilibrium the total pressure is 0.90 atm. Find Kp in atm3.
    Answer and solution

    Answer: 0.108 atm<sup>3</sup> (±0.002)

    The gases are in the ratio 2 : 1, so p(NH3) = 2/3 × 0.90 = 0.60 atm and p(CO2) = 0.30 atm.

    Kp = (0.60)2(0.30) = 0.108 atm3.

  29. NATStandard

    A ⇌ B has K = 4 and B ⇌ C has K = 5 at the same temperature. Find K for A ⇌ C.
    Answer and solution

    Answer: 20

    Adding two reactions multiplies their constants: K = 4 × 5 = 20.

  30. MCQStandard

    Assertion (A): A catalyst does not change the equilibrium constant of a reaction.

    Reason (R): A catalyst lowers the activation energy of the forward and the backward reactions equally.

    1. Both A and R are true and R is the correct explanation of A
    2. Both A and R are true but R is not the correct explanation of A
    3. A is true but R is false
    4. A is false but R is true
    Answer and solution

    Answer: A

    Both are true. If both rate constants rise by the same factor, their ratio K = kf/kb is unchanged. R explains A.

← All topics