Home / Courses / Engineering entrance / Practice / Applications of derivatives

Applications of derivatives

Class 12 · 268 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Applications of derivatives.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The area of a circle is A=πr2. The rate of change of A with respect to r at r=3 is
    1. 9π
    2. 6π
    3. 3π
    4. 18π
    Answer and solution

    Answer: B

    dAdr=2πr. At r=3 this is 6π.

    Why people get this wrong: Do not substitute into πr2; you need the derivative.

  2. NATWarm-up

    The slope of the tangent to y=x2 at x=3 is
    Answer and solution

    Answer: 6

    dydx=2x, which is 6 at x=3.

    Why people get this wrong: Slope is the derivative at the point, not y.

  3. MCQWarm-up

    f(x)=x2−4x+5 is decreasing on
    1. (2,∞)
    2. (−∞,∞)
    3. (−∞,−2)
    4. (−∞,2)
    Answer and solution

    Answer: D

    f′(x)=2x−4. It is negative when x<2, so f decreases on (−∞,2).

    Why people get this wrong: The vertex is at x=2; a parabola opening up falls before it.

  4. NATWarm-up

    The positive critical point of f(x)=x3−12x is x=
    Answer and solution

    Answer: 2

    f′(x)=3x2−12=0 gives x2=4, so x=±2. The positive one is 2.

    Why people get this wrong: Critical points are where f′=0 (or does not exist).

  5. NATWarm-up

    The edge of a cube grows at 2 cm/s. How fast (in cm3/s) is the volume growing when the edge is 3 cm?
    Answer and solution

    Answer: 54

    V=a3, so dVdt=3a2dadt=3⋅9⋅2=54 cm3/s.

    Why people get this wrong: Chain rule: multiply by da/dt.

  6. NATWarm-up

    The greatest value of 7+6x−x2 is
    Answer and solution

    Answer: 16

    f′(x)=6−2x=0 gives x=3, and f′′=−2<0 (a maximum). f(3)=7+18−9=16.

    Why people get this wrong: Give the value, not the point.

  7. MCQWarm-up

    The slope of the normal to y=x2 at x=2 is
    1. −14
    2. 4
    3. -4
    4. 14
    Answer and solution

    Answer: A

    The tangent slope is 2x=4. The normal is perpendicular, so its slope is −14.

    Why people get this wrong: The normal slope is the negative reciprocal.

  8. NATWarm-up

    For f(x)=x2−6x+8 on [1,5], Rolle's theorem gives a point c with f′(c)=0. Find c.
    Answer and solution

    Answer: 3

    f(1)=3 and f(5)=3, so Rolle applies. f′(c)=2c−6=0 gives c=3, which lies in (1,5).

    Why people get this wrong: Check that f(1)=f(5) first.

  9. MCQWarm-up

    f(x)=x3 is
    1. increasing only on (0,∞)
    2. decreasing on (−∞,0)
    3. increasing on all of ℝ
    4. neither increasing nor decreasing at x=0, so not monotonic
    Answer and solution

    Answer: C

    f′(x)=3x2≥0 with equality only at x=0. A function with f′≥0 and zero only at isolated points is strictly increasing.

    Why people get this wrong: f′(0)=0 does not stop f from increasing through that point.

  10. NATWarm-up

    The least value of 2x2−8x+3 is
    Answer and solution

    Answer: -5

    f′(x)=4x−8=0 gives x=2; f(2)=8−16+3=−5.

    Why people get this wrong: Do not forget the constant 3.

  11. MCQWarm-up

    The radius of a circle grows at 2 cm/s. The circumference grows at
    1. 2π cm/s
    2. 8π cm/s
    3. 4π cm/s
    4. 4π2 cm/s
    Answer and solution

    Answer: C

    C=2πr, so dCdt=2πdrdt=4π.

    Why people get this wrong: Circumference, not area: no r appears in the answer.

  12. MCQWarm-up

    The equation of the tangent to y=x3 at (1,1) is
    1. y=3x−2
    2. y=3x+2
    3. y=3x−3
    4. y=x
    Answer and solution

    Answer: A

    Slope =3x2=3. y−1=3(x−1) gives y=3x−2.

    Why people get this wrong: The line must pass through (1,1): check 3−2=1.

  13. NATWarm-up

    The local maximum value of f(x)=x3−3x is
    Answer and solution

    Answer: 2

    f′(x)=3x2−3=0 gives x=±1. f′′(x)=6x is negative at x=−1, so the local maximum is at x=−1: f(−1)=−1+3=2.

    Why people get this wrong: The local maximum is at x=−1, not x=1.

  14. NATWarm-up

    For f(x)=x2 on [1,3] the mean value theorem gives c with f′(c)=f(3)−f(1)3−1. Find c.
    Answer and solution

    Answer: 2

    Average slope =9−12=4. f′(c)=2c=4 gives c=2.

    Why people get this wrong: Use the average slope, not f(3)−f(1) alone.

  15. NATWarm-up

    Use differentials to estimate 25.1 (3 decimal places).
    Answer and solution

    Answer: 5.01 (±0.002)

    Let f(x)=x, x=25, Δx=0.1. f′(25)=12⋅5=0.1. f(25.1)≈5+0.1(0.1)=5.01.

    Why people get this wrong: Add f′(x)Δx to f(x).

  16. MCQWarm-up

    The slope of the tangent to x2+y2=25 at (3,4) is
    1. 34
    2. −43
    3. 43
    4. −34
    Answer and solution

    Answer: D

    Differentiate: 2x+2yy′=0, so y′=−xy=−34.

    Why people get this wrong: It is −x/y, not −y/x (the radius to (3,4) has slope 4/3; the tangent is perpendicular).

  17. MCQWarm-up

    sin⁡x is decreasing on
    1. (0,π2)
    2. (π2,π)
    3. (−π2,0)
    4. (3π2,2π)
    Answer and solution

    Answer: B

    (sin⁡x)′=cos⁡x<0 on (π2,3π2). Among the options only (π2,π) lies inside that interval.

    Why people get this wrong: Cosine is negative in the second and third quadrants.

  18. MCQWarm-up

    A point of inflection of a curve y=f(x) is a point where
    1. f′ changes sign
    2. f′(x)=0
    3. f is largest
    4. f′′ changes sign
    Answer and solution

    Answer: D

    An inflection is where the curve changes concavity, which means f′′ changes sign (so f′′=0 there if it exists). A change of sign of f′ marks a maximum or minimum instead.

    Why people get this wrong: A sign change of f′ is an extremum, not an inflection.

  19. NATWarm-up

    A particle moves with s=t3−6t2 (metres). Its velocity at t=2 s is (in m/s)
    Answer and solution

    Answer: -12

    v=dsdt=3t2−12t. At t=2: 12−24=−12.

    Why people get this wrong: A negative velocity means moving backwards.

  20. NATWarm-up

    A point moves on y=x2. When x=3, its x-coordinate increases at 2 units/s. How fast does y increase (units/s)?
    Answer and solution

    Answer: 12

    dydt=2xdxdt=2⋅3⋅2=12.

    Why people get this wrong: Chain rule, not just 2x.

  21. NATStandard

    Air is pumped into a spherical balloon so that its volume increases at 100π cm3/s. How fast (cm/s) is the radius growing when r=5 cm?
    Answer and solution

    Answer: 1

    V=43πr3, so dVdt=4πr2drdt. 100π=4π⋅25⋅drdt gives drdt=1.

    Why people get this wrong: Surface area 4πr2 is the multiplier.

  22. NATStandard

    A 10 m ladder leans on a wall. Its foot is 6 m from the wall and slides away at 2 m/s. How fast (m/s) is the top sliding down?
    Answer and solution

    Answer: 1.5 (±0.01)

    x2+y2=100, so xx˙+yy˙=0. Here y=8: 6⋅2+8y˙=0, y˙=−1.5. The top slides down at 1.5 m/s.

    Why people get this wrong: Find y=8 from Pythagoras before substituting.

  23. NATStandard

    Water is poured at 18π cm3/s into an inverted cone of height 12 cm and base radius 6 cm. How fast (cm/s) is the water level rising when it is 6 cm deep?
    Answer and solution

    Answer: 2

    By similar triangles r=h2. V=13πr2h=πh312. dVdt=πh24dhdt. At h=6: 18π=9πdhdt, so dhdt=2.

    Why people get this wrong: Write V in terms of h alone before differentiating.

  24. NATStandard

    A 1.8 m tall man walks away from a 5.4 m lamp post at 3 m/s. How fast (m/s) does the tip of his shadow move?
    Answer and solution

    Answer: 4.5 (±0.01)

    Let the man be x m from the post and the shadow tip s m from it. Similar triangles: s5.4=s−x1.8, so s=1.5x. Then s˙=1.5⋅3=4.5 m/s.

    Why people get this wrong: The tip moves faster than the man; the shadow length changes at 1.5 m/s only.

  25. MCQStandard

    A tangent to y=x2−x is parallel to y=3x+1. Its equation is
    1. y = 3x + 4
    2. y = 3x - 4
    3. y = 3x - 2
    4. y = 3x
    Answer and solution

    Answer: B

    y′=2x−1=3 gives x=2, y=2. y−2=3(x−2), so y=3x−4.

    Why people get this wrong: Use the point of contact, not the given line, for the intercept.

  26. MCQStandard

    The normal to y=x at (4,2) has equation
    1. y = 4x - 14
    2. y = -x/4 + 3
    3. y = -4x + 18
    4. y = -4x + 10
    Answer and solution

    Answer: C

    y′=12x=14. Normal slope =−4. y−2=−4(x−4) gives y=−4x+18.

    Why people get this wrong: The normal slope is −4, and then it must pass through (4,2).

  27. MCQStandard

    The curves y2=4x and x2=4y meet at (4,4). The acute angle between them there is
    1. tan−1⁡34
    2. tan−1⁡35
    3. tan−1⁡43
    4. π4
    Answer and solution

    Answer: A

    For y2=4x: y′=2y=12. For x2=4y: y′=x2=2. tan⁡θ=|2−121+2⋅12|=1.52=34.

    Why people get this wrong: Denominator is 1+m1m2=2, not 1.

  28. NATStandard

    Find the length of the subtangent to y=x2 at the point where x=3.
    Answer and solution

    Answer: 1.5 (±0.01)

    Subtangent =|yy′|=96=1.5. (It is the distance along the x-axis from the foot of the ordinate to the point where the tangent meets the axis.)

    Why people get this wrong: Subtangent is y/y′; subnormal is yy′.

  29. NATStandard

    Find the length of the subnormal to y2=4x at (1,2).
    Answer and solution

    Answer: 2

    Differentiate: 2yy′=4, so yy′=2. The subnormal is |ydydx|=2 (for y2=4ax it is always 2a).

    Why people get this wrong: Subnormal =yy′; do not divide.

  30. MCQStandard

    f(x)=x3−6x2+9x+1 is increasing on
    1. (1,3)
    2. (−∞,1)∪(3,∞)
    3. (−∞,3)
    4. (0,∞)
    Answer and solution

    Answer: B

    f′(x)=3x2−12x+9=3(x−1)(x−3). Positive outside the roots: x<1 or x>3.

    Why people get this wrong: The quadratic opens upward, so it is positive outside its roots.

← All topics