Thermodynamic potentials and Maxwell relations
Kinetic theory and thermodynamics · 27 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
For a system made of a single kind of particle, the chemical potential equals- the Helmholtz energy per particle,
- the internal energy per particle,
- the Gibbs energy per particle,
- the enthalpy per particle,
Answer and solution
Answer: C
. At fixed and , which are intensive, can only grow in proportion to , so and . For the same argument fails, because is extensive and must grow with ; so in general.Why people get this wrong: is true, but that derivative is not .
-
MSQStandard
For a simple one-component system with , which relations are correct?Answer and solution
Answer: A, C, D
Read the coefficients of : , , and (minus sign), so the second relation is wrong. Then . Because , at fixed always curves downward.Why people get this wrong: The sign: falls with temperature at fixed pressure, since .
-
NATStandard
The surface tension of water near room temperature falls by N m per kelvin. When the area of a water surface is increased by cm at a constant K, the heat it absorbs is ______ J.Answer and solution
Answer: 45 (±0.5)
From , J m K. Heat J J. If the surface were stretched with no heat supplied, it would cool instead.Why people get this wrong: cm is m, not .
-
MCQStandard
At fixed pressure, the Gibbs energy of a substance is plotted against temperature. The curve- falls with slope and bends downward, with curvature
- rises with slope and bends upward
- falls with slope and bends upward
- is a straight line, since is constant
Answer and solution
Answer: A
, so falls. , so the slope grows steeper as rises: the curve bends downward. This is why, at a phase transition, the phase with the larger entropy (steeper curve) wins at higher temperature.Why people get this wrong: Positive entropy and positive heat capacity give a negative slope and a negative curvature.
-
MCQExam level
The enthalpy is the Legendre transform of that replaces- by , giving
- both and , giving
- by , giving
- by , giving
Answer and solution
Answer: C
The Legendre transform swapping for its conjugate slope is . Replacing by gives ; replacing both gives . -
MSQExam level
Which of these must hold for a thermodynamically stable homogeneous substance?- Expansion coefficient
Answer and solution
Answer: A, B, C
Stability (entropy a maximum, or and minima) requires and . Then . But can be negative: water contracts on heating between and C. -
NATExam level
Mercury at K has molar volume m and volume expansion coefficient K. Using , its molar enthalpy rises by ______ J/mol when the pressure is raised by MPa at constant temperature (treat and as constant).Answer and solution
Answer: 701 (±7)
From and the Maxwell relation : . Here , so J/mol. The term is the heat released during the compression; for a liquid it is a small correction.Why people get this wrong: Using ( J/mol) forgets that also changes through .
-
MCQExam level
A fundamental relation must be first-order homogeneous (doubling , and doubles ). Which candidate fails this test? ( is a positive constant.)Answer and solution
Answer: B
Scale everything by . ; ; , since the ratio inside is unchanged. But : entropy would grow faster than the size of the system, so it is not extensive.Why people get this wrong: Count the total power of , and together; it must equal one.
-
MCQExam level
A soap film has surface tension that falls as the temperature rises, and . When the film is stretched slowly at constant temperature, it- gives out heat, since
- exchanges no heat; all the energy is work
- absorbs heat equal to
- absorbs heat, since
Answer and solution
Answer: D
The Maxwell relation from is . Because falls with temperature, this is positive: new surface has extra entropy, and at constant the film must absorb heat . The work is a separate input; together they make up the surface's internal energy.Why people get this wrong: is the work done on the film, not the heat.
-
MCQHard
A system has the fundamental relation , with a positive constant. Its equation of state relates , and asAnswer and solution
Answer: D
. So . (Also .) -
NATHard
An ideal paramagnetic salt (its entropy depends only on ) is cooled to K in a field of T. The field is then lowered slowly and adiabatically to T. Ignoring internal fields, the final temperature is ______ K.Answer and solution
Answer: 0.025 K (±0.0005)
Adiabatic and reversible means constant entropy, and , so stays fixed: K. This is adiabatic demagnetisation; in a real salt internal fields stop the cooling near the ordering temperature. -
MCQHard
A paramagnet obeys Curie's law (with , so for ). When the field is increased slowly at constant temperature,- its temperature must rise
- its entropy falls and it gives out heat
- its entropy rises and it absorbs heat
- its entropy does not change
Answer and solution
Answer: B
Maxwell relation from : . Aligning the spins orders them, so falls and heat flows out. This is the first step of magnetic cooling. -
NATHard
The chemical potential of an ideal gas at K is higher at atm than at atm by ______ meV per molecule.Answer and solution
Answer: 59.5 meV (±0.6)
, so eV eV meV. -
MSQHard
With the expansion coefficient and , the isothermal and adiabatic compressibilities, which identities are correct?Answer and solution
Answer: A, B, C
A: by the cyclic rule (B), . C: Reech's relation. D: wrong, . -
MCQHard
The Gibbs–Duhem relation for a single-component system isAnswer and solution
Answer: C
Euler: , so . Comparing with gives , i.e. . So , and are not independent.Why people get this wrong: Option A is rearranged, which is not zero.
-
MSQHard
A gas obeys per mole, with constant and a constant . Which statements are correct?- Its Joule-Thomson coefficient is .
- It has an inversion temperature, above which throttling warms it.
- It warms on throttling at every temperature.
Answer and solution
Answer: A, B, D
. Then : a pressure drop always raises the temperature. With no attraction term there is nothing to cool the gas, so there is no inversion temperature.Why people get this wrong: Inversion needs both repulsion () and attraction (); this gas has only repulsion.
-
MCQHard
For a simple fluid with expansion coefficient and isothermal compressibility , the derivative equalsAnswer and solution
Answer: D
, so . The Maxwell relation from gives , and . So . For an ideal gas and , which gives zero, as it must.Why people get this wrong: is , not .
-
NATTop rank
For one mole of a van der Waals gas with Pa m mol, m mol at K and m, is ______ J mol K.Answer and solution
Answer: 9.29 J mol$^{-1}$ K$^{-1}$ (±0.05)
with and . This simplifies to . Here , so J mol K, above because attractions make the gas easier to expand. -
MCQTop rank
The Helmholtz energy of black-body radiation in a cavity is ( a constant). Which set follows?- , ,
- , ,
- , ,
- , ,
Answer and solution
Answer: A
; ; . So , the radiation equation of state. -
NATTop rank
A gas obeying the low-density van der Waals result , with Pa m mol, m mol and J mol K, is throttled at K from bar to bar. Treating as constant, the temperature change is ______ K (negative for cooling).Answer and solution
Answer: -12.2 K (±0.2)
m/mol. Minus : . Divide by : K/Pa. Pa, so K.Why people get this wrong: The pressure falls, so is negative; a positive then means cooling.
-
MSQTop rank
A system has the fundamental relation with . Which statements are correct?- is extensive (homogeneous of degree 1)
- Its equation of state is
- Its heat capacity grows as
- Its heat capacity falls as rises
Answer and solution
Answer: A, B, C
A: scaling by scales by . and ; dividing gives (B). From : , so (C), which grows with (D false). -
NATTop rank
The fugacity of a gas is defined by , with at low pressure. For one mole of a gas obeying with m/mol at K and Pa, the fugacity coefficient is ______ (three decimal places).Answer and solution
Answer: 1.137 (±0.002)
At fixed , . For an ideal gas , so the extra term gives . Then , and . A repulsive gas has : it "escapes" more readily than an ideal gas at the same pressure.Why people get this wrong: Writing () keeps only the first term of the exponential.