Home / Courses / CSIR NET Physics / Practice / Bravais lattices and the reciprocal lattice

Bravais lattices and the reciprocal lattice

Solid state physics and devices · 86 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The primitive vectors b→j of the reciprocal lattice of a lattice with primitive vectors a→i are defined by
    1. a→i×b→j=2πδij
    2. a→i⋅b→j=δij/2π
    3. a→i⋅b→j=2πδij
    4. b→j=2πa→j/|a→j|2 for every lattice
    Answer and solution

    Answer: C

    The reciprocal basis is fixed by the dot products a→i⋅b→j=2πδij: each b→j is perpendicular to the two a→i with i≠j, and its length makes the third product equal to 2π. The explicit form is b→1=2πa→2×a→3/[a→1⋅(a→2×a→3)] and cyclic.

    Why people get this wrong: The formula 2πa→j/|a→j|2 works only when the a→i are mutually perpendicular. Crystallographers sometimes drop the 2π; physicists (and GATE) keep it.

  2. MCQWarm-up

    The reciprocal lattice of a simple cubic lattice of lattice constant a is
    1. simple cubic with lattice constant 2π/a
    2. simple cubic with lattice constant a/2π
    3. body-centred cubic with cube edge 4π/a
    4. face-centred cubic with cube edge 4π/a
    Answer and solution

    Answer: A

    With a→1=axˆ, a→2=ayˆ, a→3=azˆ the cell volume is a3 and b→1=2π(ayˆ×azˆ)/a3=(2π/a)xˆ, and similarly for the others. So the reciprocal lattice is again simple cubic, with spacing 2π/a.

    Why people get this wrong: The reciprocal lattice has units of inverse length, so a/2π cannot be right. The bcc/fcc options belong to the centred cubic lattices.

  3. NATWarm-up

    A simple cubic crystal has lattice constant 4.0 Å. The length of a primitive vector of its reciprocal lattice is ______ Å−1 (to three decimal places).
    Answer and solution

    Answer: 1.571 Å⁻¹ (±0.003)

    |b→|=2π/a=6.2832/4.0=1.571 Å−1.

    Why people get this wrong: Writing 1/a=0.25 Å−1 uses the crystallographers' convention without the 2π.

  4. MCQWarm-up

    A vector G→ belongs to the reciprocal lattice of a Bravais lattice {R→} exactly when
    1. G→⋅R→=0 for every R→
    2. |G→||R→|=2π for the shortest R→
    3. G→×R→=0 for every R→
    4. eiG→⋅R→=1 for every R→
    Answer and solution

    Answer: D

    The reciprocal lattice is the set of wave vectors of plane waves that have the periodicity of the lattice: eiG→⋅(r→+R→)=eiG→⋅r→, i.e. eiG→⋅R→=1, so G→⋅R→ is a whole multiple of 2π. With G→=hb→1+kb→2+lb→3 and R→=n1a→1+…, G→⋅R→=2π(hn1+kn2+ln3).

    Why people get this wrong: G→⋅R→=0 for every R→ would force G→=0; the condition is "a multiple of 2π", not zero.

  5. MCQWarm-up

    The first Brillouin zone of a crystal is
    1. the conventional unit cell of the reciprocal lattice
    2. the Wigner-Seitz cell of the reciprocal lattice
    3. the Wigner-Seitz cell of the direct lattice
    4. the region of k-space filled by electrons at T=0
    Answer and solution

    Answer: B

    Take the reciprocal lattice point at the origin, draw the perpendicular bisector planes of the vectors to all other reciprocal lattice points, and keep the smallest region around the origin they enclose. That region is the Wigner-Seitz cell of the reciprocal lattice, called the first Brillouin zone. Every wave vector is equivalent (differs by a G→) to exactly one point in it.

    Why people get this wrong: The region filled by electrons is the Fermi sea; it coincides with the zone only by accident (e.g. a filled band).

  6. NATWarm-up

    A one-dimensional lattice has spacing a=2.5 Å. The total width of its first Brillouin zone along k is ______ Å−1 (to three decimal places).
    Answer and solution

    Answer: 2.513 Å⁻¹ (±0.003)

    The 1D reciprocal lattice has spacing 2π/a. The first zone runs from −π/a to +π/a, a width of 2π/a=6.2832/2.5=2.513 Å−1.

    Why people get this wrong: Giving π/a=1.257 Å−1, the half-width (the distance from the centre to the zone edge).

  7. MCQWarm-up

    Starting from a Bravais lattice, the reciprocal lattice is built, and then the reciprocal lattice of that reciprocal lattice is built (same definition, a→i⋅b→j=2πδij). The result is
    1. the original lattice
    2. the original lattice scaled by 2π
    3. the original lattice rotated by 90∘
    4. a different lattice in general
    Answer and solution

    Answer: A

    The defining relation a→i⋅b→j=2πδij is symmetric between the two sets of vectors: the a→i satisfy exactly the condition required of the reciprocal vectors of the b→j. So taking the reciprocal twice returns the original lattice, just as a double Fourier transform returns the original function.

    Why people get this wrong: The factor 2π appears once in each direction and does not pile up.

  8. MCQStandard

    The reciprocal lattice of a face-centred cubic lattice with conventional cube edge a is
    1. face-centred cubic with cube edge 4π/a
    2. simple cubic with edge 2π/a
    3. body-centred cubic with cube edge 2π/a
    4. body-centred cubic with cube edge 4π/a
    Answer and solution

    Answer: D

    The fcc primitive vectors a2(0,1,1), a2(1,0,1), a2(1,1,0) span a cell of volume a3/4. Working out b→1=2πa→2×a→3/V gives b→1=2πa(−1,1,1) and cyclic. These are the primitive vectors of a bcc lattice whose cube has edge 2×2π/a=4π/a.

    Why people get this wrong: The bcc reciprocal lattice points are at 2πa(±1,±1,±1) and 2πa(±2,0,0): the cube edge is 4π/a, not 2π/a.

  9. NATStandard

    Copper is fcc with a=3.6 Å. The volume of its first Brillouin zone is ______ Å−3 (to one decimal place).
    Answer and solution

    Answer: 21.3 Å⁻³ (±0.1)

    The zone volume is (2π)3/Vc, where Vc is the volume of a primitive cell. For fcc, Vc=a3/4=46.656/4=11.664 Å3. So VBZ=248.05/11.664=21.3 Å−3.

    Why people get this wrong: Using the conventional cube a3 gives a zone four times too small (5.3 Å−3).

  10. MCQStandard

    The reciprocal lattice vector G→hkl=hb→1+kb→2+lb→3 (with h,k,l having no common factor) and the family of lattice planes (hkl) of spacing dhkl are related by
    1. G→hkl lies in the planes and |G→hkl|=dhkl
    2. G→hkl is normal to the planes and |G→hkl|=2π/dhkl
    3. G→hkl is normal to the planes and |G→hkl|=2πdhkl
    4. G→hkl makes 45∘ with the planes and |G→hkl|=π/dhkl
    Answer and solution

    Answer: B

    The plane (hkl) nearest the origin cuts the axes at a→1/h, a→2/k, a→3/l. Differences such as a→1/h−a→2/k lie in the plane, and G→⋅(a→1/h−a→2/k)=2π−2π=0, so G→ is normal to the plane. The spacing is the projection of a→1/h on the unit normal: d=Gˆ⋅a→1/h=2π/|G→|. This holds for every lattice, cubic or not.

    Why people get this wrong: Length and spacing are inversely related: closely spaced planes have long G→.

  11. MSQStandard

    Which of the following statements about the reciprocal lattice are correct?
    1. The reciprocal lattice of a Bravais lattice is itself a Bravais lattice.
    2. The reciprocal of the reciprocal lattice is the original direct lattice.
    3. Reciprocal lattice vectors have the dimension of length.
    4. Adding a basis of several atoms to each lattice point changes the reciprocal lattice.
    Answer and solution

    Answer: A, B

    (1) True: integer combinations of b→1,b→2,b→3 form a lattice. (2) True: the definition a→i⋅b→j=2πδij is symmetric in a→ and b→. (3) False: b→ has units of inverse length (Å−1), like a wave vector. (4) False: the reciprocal lattice depends only on the Bravais lattice. The basis changes the structure factor, i.e. how strongly each G→ diffracts, not where the G→ are.

    Why people get this wrong: Missing reflections in diffraction come from the basis through the structure factor; the reciprocal lattice points are still there, just with zero weight.

  12. MCQStandard

    The first Brillouin zone of the face-centred cubic lattice has the shape of
    1. a cube
    2. a rhombic dodecahedron
    3. a regular octahedron
    4. a truncated octahedron
    Answer and solution

    Answer: D

    The reciprocal of fcc is bcc. Its 8 nearest points 2πa(±1,±1,±1) give 8 hexagonal faces, and the 6 next-nearest 2πa(±2,0,0) cut off the corners as 6 square faces. Eight hexagons and six squares make a truncated octahedron (14 faces).

    Why people get this wrong: The rhombic dodecahedron is the zone of the bcc lattice (its reciprocal is fcc). It is easy to swap the two.

  13. MCQStandard

    The first Brillouin zone of the body-centred cubic lattice is
    1. a rhombic dodecahedron with 12 faces
    2. a truncated octahedron with 14 faces
    3. a cube with 6 faces
    4. a regular tetrahedron with 4 faces
    Answer and solution

    Answer: A

    The reciprocal of bcc is fcc, whose 12 nearest neighbours 2πa(±1,±1,0) and permutations define 12 bisecting planes. These planes alone close the zone, giving 12 rhombic faces: a rhombic dodecahedron.

    Why people get this wrong: A zone always has the full point symmetry of the lattice, so a tetrahedron (no inversion centre) cannot be a Brillouin zone.

  14. NATStandard

    A two-dimensional square lattice has a=3.0 Å. The area of its first Brillouin zone is ______ Å−2 (to two decimal places).
    Answer and solution

    Answer: 4.39 Å⁻² (±0.02)

    The reciprocal lattice is square with side 2π/a=2.094 Å−1. The first zone is the square from −π/a to π/a in each direction, of area (2π/a)2=4.39 Å−2. In 2D the zone area is (2π)2/Ac.

    Why people get this wrong: Squaring π/a instead of 2π/a gives a quarter of the area.

  15. MCQStandard

    The fcc primitive vectors a→1=a2(0,1,1), a→2=a2(1,0,1), a→3=a2(1,1,0) span a cell of volume
    1. a3/2
    2. a3/8
    3. a3/4
    4. a3
    Answer and solution

    Answer: C

    a→2×a→3=a24(0⋅0−1⋅1, 1⋅1−1⋅0, 1⋅1−0⋅1)=a24(−1,1,1). Then a→1⋅(a→2×a→3)=a2⋅a24(0+1+1)=a3/4. It must be: the cube holds 4 lattice points and a primitive cell holds one.

    Why people get this wrong: The product of the three lengths (a/2)3=a3/22 is not the volume; the vectors are not perpendicular.

  16. NATStandard

    For a simple cubic lattice with a=5.0 Å, the length of the reciprocal lattice vector G→111 is ______ Å−1 (to three decimal places).
    Answer and solution

    Answer: 2.177 Å⁻¹ (±0.003)

    G→111=2πa(1,1,1), so |G→|=2π3a=10.8835.0=2.177 Å−1. Check: d111=a/3=2.887 Å and 2π/d=2.177 Å−1.

    Why people get this wrong: Adding the components (3×2π/a) instead of taking the length.

  17. MCQStandard

    In a crystal of any symmetry (for example triclinic), the normal to the lattice planes (hkl) is always parallel to
    1. the direct-lattice direction [hkl]=ha→1+ka→2+la→3
    2. the reciprocal-lattice vector hb→1+kb→2+lb→3
    3. the vector a→1/h+a→2/k+a→3/l
    4. the cross product a→1×a→2
    Answer and solution

    Answer: B

    The reciprocal vector G→hkl is normal to (hkl) in every lattice (see the proof via in-plane vectors a→1/h−a→2/k). The direct direction [hkl] is normal to (hkl) only when the axes are orthogonal and equal, i.e. in cubic crystals.

    Why people get this wrong: The cubic shortcut "[hkl]⟂(hkl)" fails for tetragonal, hexagonal and lower symmetry.

  18. MSQStandard

    For a simple cubic lattice of constant a made of N primitive cells (periodic boundary conditions), which statements about its first Brillouin zone are correct?
    1. It is a cube of side 2π/a centred on Γ.
    2. Its volume is (2π/a)3.
    3. Its corners lie at a distance 3π/a from Γ.
    4. It contains 2N allowed wave vectors.
    Answer and solution

    Answer: A, B, C

    The bisectors of 2πa(±1,0,0) etc. are the planes ki=±π/a, so the zone is a cube of side 2π/a and volume (2π/a)3; its corners πa(±1,±1,±1) are 3π/a from Γ. Periodic boundary conditions on a crystal of volume Na3 allow one k→ per (2π)3/(Na3) of k-space, so the zone holds exactly N wave vectors (one per cell). The factor 2 appears only when electron spin is counted, which doubles the states, not the wave vectors.

    Why people get this wrong: Confusing wave vectors with electron states: N wave vectors, 2N states with spin.

  19. MSQStandard

    A 1D chain of N=100 cells, lattice constant a=0.50 nm, obeys periodic boundary conditions. Which statements about the allowed wave vectors are correct?
    1. Neighbouring allowed k values are 0.126 nm−1 apart.
    2. The first Brillouin zone holds exactly 100 allowed k values.
    3. k=+π/a and k=−π/a are two different states, both counted in the zone.
    4. The first Brillouin zone is 4π/a wide.
    Answer and solution

    Answer: A, B

    Periodicity over Na gives k=2πm/Na, spaced by 2π/(100×0.50 nm)=0.126 nm−1. The zone runs from −π/a to π/a, width 2π/a, and holds (2π/a)/(2π/Na)=N=100 values. π/a and −π/a differ by the reciprocal-lattice vector 2π/a, so they are the same state and are counted once.

    Why people get this wrong: The two zone edges are one point in k-space, not two.

  20. MCQStandard

    A 2D rectangular lattice has a=3 Å along x and b=6 Å along y. Its first Brillouin zone is a rectangle that is
    1. longer along ky, with sides 2π/3 and 2π/6 Å−1
    2. longer along kx, with sides 2π/3 and 2π/6 Å−1
    3. a square of side 2π/4.5 Å−1
    4. longer along kx, with sides 6 and 3 Å−1
    Answer and solution

    Answer: B

    The reciprocal vectors are b→1=(2π/a)xˆ and b→2=(2π/b)yˆ. The zone is the rectangle |kx|≤π/a, |ky|≤π/b, with sides 2π/3 along kx and 2π/6 along ky. The short real-space direction becomes the long direction in k-space.

    Why people get this wrong: Reciprocal space inverts lengths: the longer real axis gives the shorter zone side.

  21. NATExam level

    Graphene has a two-dimensional hexagonal (triangular) Bravais lattice with a=2.46 Å. The distance from the zone centre Γ to a zone corner K is ______ Å−1 (to three decimal places).
    Answer and solution

    Answer: 1.703 Å⁻¹ (±0.003)

    The reciprocal lattice is hexagonal with |b→|=4π/(3a). The zone is a regular hexagon whose edge midpoints M lie at |b→|/2=2π/(3a). The corner is further by 1/cos⁡30∘: ΓK=2π3a⋅23=4π3a=12.5667.38=1.703 Å−1. The Dirac cones of graphene sit at these K points.

    Why people get this wrong: Using ΓM=2π/(3a)=1.475 Å−1, the edge midpoint.

  22. NATExam level

    Aluminium is fcc with a=4.05 Å. The distance from Γ to the L point (centre of a hexagonal face) of its first Brillouin zone is ______ Å−1 (to three decimal places).
    Answer and solution

    Answer: 1.344 Å⁻¹ (±0.003)

    The hexagonal faces bisect the shortest reciprocal vectors 2πa(1,1,1), of length 23π/a. The face centre L=πa(1,1,1) is half way: ΓL=3π/a=5.441/4.05=1.344 Å−1.

    Why people get this wrong: Taking X at 2π/a (the square face) is a different, farther point (1.551 Å−1).

  23. MCQExam level

    A 2D lattice has a→1=axˆ and a→2=a2(xˆ+3yˆ). Its reciprocal primitive vectors are
    1. b→1=2πaxˆ, b→2=2πayˆ
    2. b→1=2πa(xˆ+yˆ/3), b→2=2πayˆ
    3. b→1=2πa(xˆ−yˆ/3), b→2=4π3ayˆ
    4. b→1=4π3axˆ, b→2=2πa(xˆ+3yˆ)
    Answer and solution

    Answer: C

    Check a→i⋅b→j=2πδij for the third pair. a→1⋅b→1=2π; a→2⋅b→1=a2⋅2πa(1−3/3)=0; a→1⋅b→2=0; a→2⋅b→2=a32⋅4π3a=2π. Both have length 4π/(3a) and make 120∘ with each other: the reciprocal of a hexagonal lattice is hexagonal, rotated by 30∘.

    Why people get this wrong: Testing only a→1⋅b→1=2π passes several options. The cross conditions a→2⋅b→1=0 decide.

  24. MSQExam level

    Which of the following point arrays are Bravais lattices?
    1. the 2D triangular array (every point with six neighbours at 60∘ spacing)
    2. the 2D kagome array of corner-sharing triangles
    3. the hexagonal close-packed array of atom centres
    4. the base-centred monoclinic array
    Answer and solution

    Answer: A, D

    Test: every point must have identical surroundings with the same orientation. The triangular array passes (it is the 2D hexagonal lattice). Base-centred monoclinic is one of the 14 Bravais lattices. The kagome array has three inequivalent points per cell (a triangular lattice with a 3-point basis). In hcp the A-layer and B-layer atoms see their neighbours rotated by 60∘ relative to each other, so hcp is a hexagonal lattice with a 2-atom basis.

    Why people get this wrong: "Every atom has 12 neighbours at the same distance" (true in hcp) is not enough: the neighbours must also point the same way.

  25. NATExam level

    A monovalent metal is fcc. Treating its electrons as free, the ratio of the Fermi wave vector kF to the distance ΓL from the zone centre to the nearest zone face is ______ (to two decimal places).
    Answer and solution

    Answer: 0.9 (±0.01)

    Electron density n=4/a3 (one electron per atom, four atoms per cube). kF=(3π2n)1/3=(12π2)1/3/a=4.911/a. The nearest faces are the hexagons at ΓL=3π/a=5.441/a. Ratio =0.90: the Fermi sphere fits inside the zone without touching it, which is why the alkali-like metals (and to a good degree Cu, Ag, Au) have nearly spherical Fermi surfaces.

    Why people get this wrong: Comparing with ΓX=2π/a (not the nearest face) gives 0.78 and hides how close the sphere comes to the L faces.

  26. NATExam level

    A hypothetical divalent metal has a simple cubic lattice of constant a. In the free-electron model its Fermi wave vector in units of π/a is ______ (to two decimal places).
    Answer and solution

    Answer: 1.24 (±0.01)

    n=2/a3, so kF=(3π2⋅2/a3)1/3=(6π2)1/3/a=3.898/a=1.24π/a. The zone faces are at π/a, so the Fermi sphere pokes through the faces into the second zone, while the zone corners at 3π/a stay empty. A divalent metal can therefore conduct even though two electrons per cell could, in principle, fill exactly one band.

    Why people get this wrong: Expecting the Fermi sphere to equal the zone volume: it has the same volume, but a sphere and a cube of equal volume do not coincide.

  27. MCQExam level

    The volume of the first Brillouin zone of a bcc lattice with conventional cube edge a is
    1. 8π3/a3
    2. 32π3/a3
    3. 4π3/a3
    4. 16π3/a3
    Answer and solution

    Answer: D

    The bcc primitive cell has volume a3/2 (two lattice points per cube). Zone volume =(2π)3/(a3/2)=2⋅8π3/a3=16π3/a3.

    Why people get this wrong: 8π3/a3 uses the conventional cube; 32π3/a3 is the fcc answer (primitive volume a3/4).

  28. MCQExam level

    For elastic scattering, the Laue condition k→′−k→=G→ is satisfied exactly when the incident wave vector k→ (drawn from the origin of k-space) ends
    1. on the plane that perpendicularly bisects the line from the origin to −G→
    2. anywhere on the sphere of radius |G→|
    3. at a reciprocal lattice point
    4. inside the first Brillouin zone
    Answer and solution

    Answer: A

    Elastic: |k→′|=|k→|, so |k→+G→|2=k2, giving 2k→⋅G→+G2=0, i.e. k→⋅(−Gˆ)=|G→|/2. Since −G→ is also a reciprocal vector, k→ ends on the perpendicular bisector plane of −G→: a Bragg plane. The Brillouin zone boundaries are exactly these planes, which is why electrons with k→ on a zone face are Bragg-reflected and band gaps open there.

    Why people get this wrong: Ending at a reciprocal lattice point is not required; a whole plane of k→ diffracts off each G→.

  29. NATExam level

    A tetragonal crystal has a=4.0 Å and c=6.0 Å. Using |G→hkl|=2π/dhkl, the spacing of the (101) planes is ______ Å (to three decimal places).
    Answer and solution

    Answer: 3.328 Å (±0.003)

    The reciprocal lattice is tetragonal with |b→1|=|b→2|=2π/a and |b→3|=2π/c, all orthogonal. |G→101|2=(2π)2(1/a2+1/c2), so 1/d2=1/16+1/36=0.09028 Å−2 and d=3.328 Å.

    Why people get this wrong: Using the cubic formula with an "average" lattice constant.

  30. NATExam level

    A hexagonal crystal has a=3.2 Å and c=5.2 Å. The spacing of its (100) planes is ______ Å (to three decimal places).
    Answer and solution

    Answer: 2.771 Å (±0.003)

    For hexagonal axes, 1d2=43h2+hk+k2a2+l2c2, which follows from |b→1|=|b→2|=4π/(3a) at 60∘ to each other. For (100): 1/d2=4/(3a2), so d=3a/2=2.771 Å. Geometrically: the (100) planes are rows of the triangular net, 3a/2 apart.

    Why people get this wrong: Answering d=a=3.2 Å, as for a square lattice.

← All topics · Timed mock test →