Home / Courses / CSIR NET Physics / Practice / Damped and forced oscillations, resonance

Damped and forced oscillations, resonance

Oscillations, waves and optics · 5 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQHard

    The average power absorbed by a driven damped oscillator is P(ω)=F022m2βω2(ω02−ω2)2+4β2ω2. Which statements are correct?
    1. The curve is exactly symmetric about ω0 on a linear frequency axis.
    2. Its maximum is exactly at ω=ω0, for any damping.
    3. Its full width at half maximum is exactly 2β, for any damping.
    4. P→0 as ω→0.
    Answer and solution

    Answer: B, C, D

    Divide top and bottom by ω2: P∝2β/[(ω02/ω−ω)2+4β2], largest when ω=ω0 (B). Half maximum when |ω02/ω−ω|=2β, whose positive roots differ by exactly 2β (C). At ω→0 the numerator ω2→0 (D). A is false: the curve is symmetric in ln⁡ω (the roots multiply to ω02), not in ω; it looks symmetric only near a sharp peak.

    Why people get this wrong: Many students "know" the width is 2β only approximately; for the power curve it is exact, while the symmetry is the approximate part.

  2. MCQHard

    An underdamped oscillator of mass m at rest at x=0 receives a sharp impulse J at t=0. For t>0 its displacement is
    1. Jme−βtsin⁡ωdt
    2. Jmωdsin⁡ω0t
    3. Jmωde−βtsin⁡ωdt
    4. Jmω0e−βtcos⁡ωdt
    Answer and solution

    Answer: C

    The impulse gives x(0)=0, x˙(0)=J/m. The free solution x=Ce−βtsin⁡ωdt meets x(0)=0, and x˙(0)=Cωd=J/m fixes C=J/(mωd). This is the Green's function of the oscillator (times J).

    Why people get this wrong: The option (J/m)e−βtsin⁡ωdt has the wrong units: J/m is a speed, so it must be divided by a frequency.

  3. NATTop rank

    An oscillator with Q=5 is released from rest. The fraction of its initial energy left after exactly three damped periods is ______ (to four decimal places).
    Answer and solution

    Answer: 0.0226 (±0.0005)

    Released from rest, x=x0e−βt(cos⁡ωdt+(β/ωd)sin⁡ωdt) and x˙∝e−βtsin⁡ωdt. After each full period Td the mass is again at rest, so all energy is 12kx2 with x=x0e−βTd. Energy ratio after three periods: e−6βTd. With β/ω0=1/(2Q)=0.1 and ωd=ω00.99: βTd=2π(0.1)/0.99499=0.6315, so the fraction is e−3.789=0.0226.

    Why people get this wrong: Using ω0 instead of ωd in the period gives e−1.2π=0.0230: close, but outside the tolerance.

  4. MSQTop rank

    A lightly damped oscillator is in steady state under F0cos⁡ωt. Which statements are correct?
    1. The time-averaged kinetic and potential energies are equal only when ω=ω0.
    2. For ω<ω0 the average potential energy exceeds the average kinetic energy.
    3. The displacement amplitude is largest exactly at ω=ω0.
    4. At the two half-power frequencies the displacement lags the force by π/4 and 3π/4.
    Answer and solution

    Answer: A, B, D

    ⟨KE⟩=14mω2A2 and ⟨PE⟩=14mω02A2: equal only at ω=ω0 (A), and PE>KE below it (B). C is false: the displacement peak is at ω02−2β2. D: at the half-power points |ω02−ω2|=2βω, so tan⁡ϕ=±1: ϕ=π/4 below and 3π/4 above resonance.
  5. NATTop rank

    For an oscillator with Q=1, the displacement amplitude when driven at ω0 is a fraction f of the largest displacement amplitude (reached at ωr). The value of f is ______ (to three decimal places).
    Answer and solution

    Answer: 0.866 (±0.003)

    A(ω0)=F0/(2mβω0) and Amax⁡=F0/(2mβω02−β2). Ratio =1−(β/ω0)2=1−1/(4Q2)=3/4=0.866.

    Why people get this wrong: For high Q this ratio is almost 1, which is why the two resonances are often treated as the same; at Q=1 they are not.

← All topics · Timed mock test →