Home / Courses / CSIR NET Physics / Practice / Electrodynamics and relativity: covariant form, field transformations

Electrodynamics and relativity: covariant form, field transformations

Electricity and magnetism · 84 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these is the same in every inertial frame?
    1. |E→|2
    2. |B→|
    3. E→⋅B→
    4. |E→×B→|
    Answer and solution

    Answer: C

    The field tensor has two invariants: E→⋅B→ and E2−c2B2. Each field separately, and their cross product (the Poynting vector), change from frame to frame.

    Why people get this wrong: It is the combination E2−c2B2 that is invariant, not E2.

  2. MCQWarm-up

    The four-current density is
    1. (ρ,J→/c) with ρ a scalar
    2. (cρ,J→)
    3. (J→,ρ) with J→ as time part
    4. (ρc2,J→)
    Answer and solution

    Answer: B

    Jμ=(cρ,J→), which is ρ0uμ for a charge cloud with rest density ρ0 and four-velocity uμ=γ(c,v→). Both parts have units of A/m2.

    Why people get this wrong: Charge density is the time component, so it changes under boosts like ct.

  3. MCQWarm-up

    Under a Lorentz boost along a direction nˆ, the field components parallel to nˆ
    1. are unchanged, for both E→ and B→
    2. are multiplied by γ
    3. are divided by γ
    4. swap: E∥ becomes cB∥
    Answer and solution

    Answer: A

    E∥′=E∥, B∥′=B∥; only the perpendicular parts mix: E→⟂′=γ(E→+v→×B→)⟂ and B→⟂′=γ(B→−v→×E→/c2)⟂.

    Why people get this wrong: This is the reverse of lengths, where the parallel part changes.

  4. NATWarm-up

    How many independent components does the electromagnetic field tensor Fμν have?
    Answer and solution

    Answer: 6

    Fμν is antisymmetric in four dimensions: its diagonal is zero and the entries below it are minus those above, leaving 4×3/2=6: the three components of E→/c and the three of B→.

    Why people get this wrong: A general 4×4 tensor has 16 entries; antisymmetry leaves 6.

  5. MCQWarm-up

    The electric charge of a particle
    1. grows by the factor γ when it moves
    2. falls by γ when it moves
    3. can change sign in some frames
    4. is a Lorentz scalar, the same in every frame
    Answer and solution

    Answer: D

    Charge is invariant: atoms are neutral although electrons move far faster than nuclei, and the integral of J0 over a hypersurface is frame independent by ∂μJμ=0. Charge density changes (by γ) because volume contracts, not because charge does.

    Why people get this wrong: Density changes; total charge does not.

  6. MCQWarm-up

    The continuity equation ∇⋅J→+∂ρ/∂t=0 in covariant form is
    1. ∂μAμ=0
    2. ∂μJμ=0
    3. JμJμ=0
    4. □Jμ=0
    Answer and solution

    Answer: B

    With x0=ct and J0=cρ: ∂0J0=1c∂t(cρ)=∂tρ, so ∂μJμ=∂tρ+∇⋅J→=0. A four-divergence that vanishes is a statement valid in every frame.

    Why people get this wrong: ∂μAμ=0 is the Lorenz gauge, a choice, not a law.

  7. MCQWarm-up

    With xμ=(ct,x→) and metric signature (+,−,−,−), the d'Alembertian □=∂μ∂μ is
    1. ∇2−1c2∂2∂t2
    2. 1c2∂2∂t2−∇2
    3. 1c2∂2∂t2+∇2
    4. ∂2∂t2−∇2
    Answer and solution

    Answer: B

    ∂μ=(1c∂t,∇) and ∂μ=(1c∂t,−∇). Their contraction is 1c2∂t2−∇2. Books with the opposite signature (−,+,+,+) get the first option; the wave equation □Aμ=μ0Jμ then changes sign accordingly.

    Why people get this wrong: The overall sign depends on the metric convention, but the relative minus sign between time and space never does; the last option also fails a units check.

  8. NATStandard

    In frame S there is a uniform electric field of 3.0×105 V/m along y and no magnetic field. An observer moves at 0.60c along x. The magnetic field she measures has magnitude ______ mT (to two decimal places).
    Answer and solution

    Answer: 0.75 mT (±0.01)

    B→⟂′=γ(B→−v→×E→/c2)⟂=−γvEc2zˆ. With γ=1.25: |B′|=1.25×0.6×3.0×1053.0×108=1.25×6.0×10−4 T =0.75 mT.

    Why people get this wrong: Forgetting γ gives 0.60 mT.

  9. MCQStandard

    Compared with its Coulomb field at rest, the electric field of a charge moving uniformly at Lorentz factor γ (at a fixed distance from its present position) is
    1. the same in every direction
    2. stronger along the line of motion by γ2
    3. stronger by γ perpendicular to the motion and weaker by γ2 along it
    4. weaker by γ in every direction
    Answer and solution

    Answer: C

    E=q4πϵ0r21−β2(1−β2sin2⁡θ)3/2. At θ=90∘ this is γ times Coulomb; at θ=0, 1/γ2 times. The field lines squash into a "pancake" perpendicular to the motion.

    Why people get this wrong: The ratio of perpendicular to parallel field is γ3.

  10. MSQStandard

    Which statements are true?
    1. E2−c2B2 is a Lorentz invariant
    2. E→⋅B→ is a Lorentz invariant
    3. |E→| is a Lorentz invariant
    4. If E→⟂B→ and E<cB in one frame, some frame has E→=0
    Answer and solution

    Answer: A, B, D

    The invariants are FμνFμν∝B2−E2/c2 and FμνF~μν∝E→⋅B→. With E→⋅B→=0 and E<cB, a boost at v→=E→×B→/B2 (speed E/B<c) removes E→, leaving B′=B2−E2/c2.

    Why people get this wrong: The size of a single field is not invariant.

  11. NATStandard

    A charged particle moves in crossed fields E=1.0×104 V/m and B=0.050 T (perpendicular). Its guiding centre drifts at ______ ×105 m/s (to one decimal place).
    Answer and solution

    Answer: 2 ×10⁵ m/s (±0.02)

    vd=E/B=1.0×104/0.050=2.0×105 m/s, along E→×B→, the same for any charge or mass. In the frame moving at vd the electric field vanishes and the particle simply gyrates.

    Why people get this wrong: The drift does not depend on the charge's sign or mass.

  12. MCQStandard

    With Aμ=(ϕ/c,A→), the Lorenz gauge condition ∂μAμ=0 reads
    1. ∇⋅A→=0
    2. ∇⋅A→=∂ϕ/∂t
    3. ∇×A→=0
    4. ∇⋅A→+1c2∂ϕ∂t=0
    Answer and solution

    Answer: D

    ∂0A0=1c∂tϕc=1c2∂tϕ, so the condition is ∇⋅A→+1c2∂tϕ=0. In this gauge each component obeys the wave equation □Aμ=μ0Jμ (with □=1c2∂t2−∇2). The Coulomb gauge ∇⋅A→=0 is not Lorentz covariant.

    Why people get this wrong: Dropping the 1/c2 breaks the units.

  13. NATStandard

    A long thin rod carries charge 1.0 nC/m in its own rest frame. It moves along its length at 0.80c. In the lab, its line charge density is ______ nC/m (to two decimal places).
    Answer and solution

    Answer: 1.67 nC/m (±0.01)

    The charge is invariant and the rod is contracted by γ=1/1−0.64=5/3, so λ=γλ0=1.67 nC/m. It also carries a current I=λv=1.67×10−9×0.8c=0.40 A.

    Why people get this wrong: Moving charge looks denser, not thinner.

  14. MCQStandard

    For a charge moving with constant velocity v→ (any speed below c), its magnetic and electric fields at any point are related by
    1. B→=v→×E→c2
    2. B→=v→×E→
    3. B→=E→×v→c2
    4. B→=E→c
    Answer and solution

    Answer: A

    In the rest frame B→′=0; transforming to the lab gives B→=v→×E→/c2 exactly. At low speed this is Biot-Savart for a point charge, B→=μ04πqv→×rˆr2.

    Why people get this wrong: Order of the cross product matters: E→×v→ has the opposite sign.

  15. MSQStandard

    Which of these sets form a four-vector under Lorentz transformations?
    1. (ϕ/c,A→)
    2. (cρ,J→)
    3. (E→,B→) arranged as (|E→|/c,B→)
    4. (ω/c,k→) of a plane wave
    Answer and solution

    Answer: A, B, D

    The potentials, the current and the wave vector are four-vectors (the last because the phase k→⋅r→−ωt is invariant). The fields are the six components of an antisymmetric second-rank tensor; they cannot be packed into a four-vector.

    Why people get this wrong: E→ and B→ together have six components: a tensor, not a vector.

  16. MCQStandard

    Maxwell's equations keep their form under
    1. Galilean transformations only
    2. Lorentz transformations, but not Galilean ones
    3. both Galilean and Lorentz transformations
    4. neither, unless the fields are static
    Answer and solution

    Answer: B

    The wave equation they imply has speed c in every frame, which a Galilean change of frame would alter. Historically this mismatch led Lorentz, Poincaré and Einstein to special relativity: electrodynamics was relativistic before mechanics was.

    Why people get this wrong: Mechanics, not electromagnetism, had to change.

  17. NATStandard

    A large parallel-plate capacitor has field 1.0×105 V/m between its plates (in its rest frame). It moves at 0.60c in a direction parallel to its plates. In the lab, the field between the plates is ______ ×105 V/m (to two decimal places).
    Answer and solution

    Answer: 1.25 ×10⁵ V/m (±0.01)

    The field is perpendicular to the motion, so E=γE0. Physically, the plates contract along the motion and the surface charge density grows by γ; E=σ/ϵ0 follows it. Moving perpendicular to the plates, the field would be unchanged.

    Why people get this wrong: Perpendicular field components grow with γ; the parallel one does not.

  18. NATStandard

    In frame S, E→=(1.0,2.0,0)×105 V/m and B→=(0,0.50,0.30)×10−3 T. In a frame moving at 0.9c in some direction, the value of E→′⋅B→′ is ______ V T/m.
    Answer and solution

    Answer: 100 V T/m (±0.5)

    E→⋅B→ is invariant, so compute it in S: 1.0×105×0+2.0×105×0.50×10−3+0×0.30×10−3=100 V T/m. Because it is non-zero, no frame has a pure E→ or a pure B→.

    Why people get this wrong: No transformation is needed: the boost speed is a distraction.

  19. NATStandard

    An electron moves at 1.0×106 m/s. At its present position's perpendicular distance of 1.0 nm, its magnetic field has magnitude ______ mT (to one decimal place).
    Answer and solution

    Answer: 16 mT (±0.1)

    At v≪c, B=μ04πqvr2=10−7×1.602×10−19×10610−18=1.60×10−2 T. Equivalently B=vE/c2 with E=1.44×109 V/m.

    Why people get this wrong: Even a single slow electron makes a sizeable field very close to it.

  20. NATStandard

    In the lab a cloud of charge has density ρ=5.0 μC/m3 and current density J=1.2×103 A/m2 along x. Taking c=3.0×108 m/s, its charge density in its own rest frame is ______ μC/m3 (to two decimal places).
    Answer and solution

    Answer: 3 $\mu$C/m$^3$ (±0.02)

    Jμ=(cρ,J→) is a four-vector, so JμJμ=c2ρ2−J2 is the same in every frame. In the rest frame J→=0, so ρ0=ρ2−J2/c2. J/c=1.2×103/3.0×108=4.0×10−6 C/m3, so ρ0=5.02−4.02=3.0 μC/m3. The cloud moves at J/ρ=0.8c, and the lab density is γρ0=53×3.0=5.0, as it should be.

    Why people get this wrong: Subtracting instead of using the invariant (5.0−4.0=1.0), or adding the squares.

  21. MCQStandard

    In SI units with F0i=−Ei/c, the invariant FμνFμν for a region with a pure magnetic field B→ (no electric field) is
    1. −2B2
    2. B2
    3. 2B2/c2
    4. 2B2
    Answer and solution

    Answer: D

    In general FμνFμν=2(B2−E2c2): each field component appears twice in the antisymmetric tensor, and the time-space entries pick up one minus sign from lowering a single time index. With E=0 it is 2B2. Its sign tells which field "wins": positive here, so there is no frame in which the field is purely electric.

    Why people get this wrong: Forgetting the factor 2 from the two entries Fij and Fji, or putting the 1/c2 on B instead of on E.

  22. NATExam level

    In the lab, E=6.0×106 V/m and B=0.010 T, at right angles. In the frame where the magnetic field vanishes, the electric field is ______ MV/m (to two decimal places).
    Answer and solution

    Answer: 5.2 MV/m (±0.02)

    cB=3.0×106 V/m <E, so a frame with B→′=0 exists (moving at c2B/E=0.5c along E→×B→). The invariant E2−c2B2 gives E′=36−9×106=5.20 MV/m.

    Why people get this wrong: Subtracting the fields linearly (E−cB) gives 3.0 MV/m, wrong.

  23. NATExam level

    A proton moving at 0.90c passes an atom at closest distance 1.0 nm. The largest transverse electric field the atom feels is ______ ×109 V/m (to two decimal places).
    Answer and solution

    Answer: 3.3 ×10⁹ V/m (±0.03)

    At closest approach the field is perpendicular to the motion: E=γq4πϵ0b2. γ=1/0.19=2.294 and q4πϵ0b2=1.44×109 V/m, so E=3.30×109 V/m.

    Why people get this wrong: At closest approach the relevant enhancement is γ, not 1/γ2.

  24. NATExam level

    For the proton of the previous situation (0.90c, impact distance 1.0 nm), the transverse field pulse at the atom lasts roughly b/(γv). Find this time in attoseconds (to two decimal places).
    Answer and solution

    Answer: 1.61 as (±0.02)

    The field is strong only while the proton is within a distance ∼b/γ of closest approach along its path (the pancake has that thickness), so Δt≈bγv=10−92.294×0.9×3.0×108=1.61×10−18 s. Fast particles deliver sharp kicks, which is why their energy loss in matter depends on ln⁡γ.

    Why people get this wrong: The duration shrinks as 1/γ while the peak grows as γ.

  25. MCQExam level

    A neutral wire carries a current (electrons drifting). A test charge moves parallel to the wire at the electrons' drift speed. In the test charge's rest frame, the force on it is
    1. zero, because the charge is at rest
    2. magnetic, from the moving positive ions
    3. electric, because in that frame the wire is no longer neutral
    4. the same as in the lab, but of opposite sign
    Answer and solution

    Answer: C

    In the test charge's frame the electrons are at rest and their spacing grows (no longer contracted), while the positive ions move and their spacing contracts. The wire carries a net charge and exerts an electric force, matching the lab's magnetic force (to the factor γ that relates forces in the two frames). Magnetism is the relativistic side of electricity.

    Why people get this wrong: A charge at rest feels no magnetic force, but it can feel an electric one.

  26. MSQExam level

    Under a boost along the x axis, which field components keep their values?
    1. Ex
    2. Bx
    3. Ey
    4. Bz
    Answer and solution

    Answer: A, B

    Components along the boost are unchanged. Ey′=γ(Ey−vBz) and Bz′=γ(Bz−vEy/c2) mix (as do Ez and By).

    Why people get this wrong: Only the two components along the boost survive unchanged.

  27. NATExam level

    In frame S, E→=2.0×106yˆ V/m and B→=0.010zˆ T. Frame S′ moves at 0.50c along +x. The field Ey′ is ______ ×105 V/m (to two decimal places).
    Answer and solution

    Answer: 5.79 ×10⁵ V/m (±0.03)

    Ey′=γ(Ey−vBz) with γ=1.1547 and vBz=0.5×3.0×108×0.010=1.50×106 V/m. So Ey′=1.1547×(2.0−1.50)×106=5.79×105 V/m (with c=2.998×108).

    Why people get this wrong: Sign: v→×B→=vxˆ×Bzˆ=−vByˆ, so it subtracts.

  28. MCQExam level

    In the field tensor Fμν=∂μAν−∂νAμ, where do E→ and B→ sit (signs depend on the metric convention)?
    1. E→ in the diagonal, B→ off the diagonal
    2. the time-space entries F0i hold ±Ei/c; the space-space entries Fij hold ±Bk
    3. the time-space entries hold B→; the space-space entries hold E→
    4. E→ in the first row only, B→ nowhere
    Answer and solution

    Answer: B

    F0i involves ∂tAi and ∂iϕ, the ingredients of E→=−∇ϕ−∂tA→ (divided by c). Fij=∂iAj−∂jAi is a component of ∇×A→=B→. The diagonal is zero by antisymmetry.

    Why people get this wrong: An antisymmetric tensor has zeros on its diagonal.

  29. MSQExam level

    In some frame E→⋅B→≠0. Which statements are true?
    1. There is a frame in which E→ and B→ are perpendicular
    2. No frame has B→=0
    3. No frame has E→=0
    4. There is a frame in which E→ and B→ are parallel
    Answer and solution

    Answer: B, C, D

    If either field vanished in some frame, E→⋅B→ would be zero there and hence everywhere. Perpendicular fields also give zero, so they are impossible too. A boost along E→×B→ with speed v given by v→1+v2/c2=E→×B→B2+E2/c2 makes them parallel.

    Why people get this wrong: Non-zero E→⋅B→ rules out perpendicular fields in every frame.

  30. MCQExam level

    The covariant equation of motion dpμdτ=qFμνuν has a time component (μ=0) that states
    1. the conservation of charge
    2. that the rate of change of the particle's energy is qE→⋅v→
    3. Gauss's law
    4. that the magnetic force changes the speed
    Answer and solution

    Answer: B

    p0=Etot/c, and the μ=0 component gives dEtotdt=qE→⋅v→: only the electric field does work. The space components give dp→dt=q(E→+v→×B→).

    Why people get this wrong: The magnetic force is perpendicular to v→ and does no work.

← All topics · Timed mock test →