Home / Courses / CSIR NET Physics / Practice / Analytic functions and Cauchy's theorem

Analytic functions and Cauchy's theorem

Mathematical methods · 69 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these functions of z=x+iy is analytic in the whole complex plane?
    1. |z|2
    2. z‾
    3. z2ez
    4. Rez
    Answer and solution

    Answer: C

    Products and compositions of entire functions are entire, and z2 and ez are both entire. The others depend on z‾: for z‾=x−iy, ux=1 but vy=−1, so Cauchy-Riemann fails everywhere. |z|2=zz‾ satisfies CR only at z=0, and Rez=(z+z‾)/2 nowhere.

    Why people get this wrong: A function that is real-valued and non-constant (like Rez or |z|2) can never be analytic on an open set.

  2. NATWarm-up

    f=u+iv is analytic with u=x2−y2+3x and v(0,0)=0. The value of v(1,1) is ______.
    Answer and solution

    Answer: 5

    Cauchy-Riemann: vy=ux=2x+3, so v=2xy+3y+g(x). Then vx=2y+g′(x) must equal −uy=2y, so g is a constant, zero by v(0,0)=0. v=2xy+3y and v(1,1)=5. (Indeed f=z2+3z.)

    Why people get this wrong: Forgetting the 3y from integrating the constant 3 in ux.

  3. MCQWarm-up

    The integral ∮|z|=1dzz, taken anticlockwise, equals
    1. 0
    2. 2πi
    3. πi
    4. 2π
    Answer and solution

    Answer: B

    On the circle z=eiθ, dz=ieiθdθ, so the integrand is idθ and the integral is ∫02πidθ=2πi. This single integral is the seed of the whole residue theorem.

    Why people get this wrong: Cauchy's theorem does not give 0 here: 1/z is not analytic at the origin inside the circle.

  4. MCQWarm-up

    The radius of convergence of ∑n=0∞zn2n is
    1. 1/2
    2. 1
    3. 2
    4. ∞
    Answer and solution

    Answer: C

    Ratio test: |an+1/an|=|z|/2<1 for |z|<2. Equivalently the sum is 1/(1−z/2), whose only singularity is at z=2, a distance 2 from the centre.

    Why people get this wrong: Reading the radius as the ratio of coefficients upside down gives 1/2.

  5. NATWarm-up

    The value of ∮|z|=3(z3+2z)dz, taken anticlockwise, is ______.
    Answer and solution

    Answer: 0

    A polynomial is entire, so by Cauchy's theorem its integral round any closed curve is 0. (Each power zn with n≥0 has the antiderivative zn+1/(n+1), which returns to its starting value.)

    Why people get this wrong: Only z−1 survives a closed loop; positive powers always give 0.

  6. MCQWarm-up

    The singularity of sin⁡zz at z=0 is
    1. a simple pole
    2. an essential singularity
    3. a branch point
    4. removable
    Answer and solution

    Answer: D

    sin⁡zz=1−z23!+z45!−⋯ has no negative powers, so defining its value at 0 as 1 makes it analytic there.

    Why people get this wrong: Division by z does not make a pole when the numerator also vanishes at z=0.

  7. NATStandard

    The value of 12πi∮|z|=2ezz−1dz (anticlockwise) is ______ (to two decimal places).
    Answer and solution

    Answer: 2.72 (±0.01)

    Cauchy's integral formula: f(a)=12πi∮f(z)z−adz for a inside the curve and f analytic. Here f=ez and a=1 lies inside |z|=2, so the value is e≈2.72.

    Why people get this wrong: Check that the point is inside the contour: with |z|=1/2 the answer would be 0.

  8. MCQStandard

    A harmonic conjugate of u(x,y)=excos⁡y (so that u+iv is analytic) is
    1. exsin⁡y
    2. −exsin⁡y
    3. e−xsin⁡y
    4. excos⁡y
    Answer and solution

    Answer: A

    vy=ux=excos⁡y gives v=exsin⁡y+g(x), and vx=exsin⁡y+g′=−uy=exsin⁡y, so g is constant. Then u+iv=ex(cos⁡y+isin⁡y)=ez.

    Why people get this wrong: The sign: −exsin⁡y satisfies Laplace's equation too, but pairs with u to make ez, which is not analytic.

  9. MSQStandard

    Which of these functions are harmonic (∇2u=0) in the whole xy-plane?
    1. x2−y2
    2. x2+y2
    3. exsin⁡y
    4. x3−3xy2
    Answer and solution

    Answer: A, C, D

    Real and imaginary parts of entire functions are harmonic: x2−y2=Rez2, exsin⁡y=Imez, x3−3xy2=Rez3. But ∇2(x2+y2)=4≠0.

    Why people get this wrong: Check uxx+uyy directly: x2+y2 gives 2+2, not 2−2.

  10. NATStandard

    The integral ∮|z|=1cos⁡zz3dz (anticlockwise) equals kπi. The value of k is ______.
    Answer and solution

    Answer: -1

    The derivative form of Cauchy's formula: ∮f(z)(z−a)n+1dz=2πin!f(n)(a). With f=cos⁡z, n=2, a=0: f′′(0)=−cos⁡0=−1, so the integral is 2πi2(−1)=−πi and k=−1.

    Why people get this wrong: Forgetting the 1/n! gives −2πi.

  11. MCQStandard

    For 0<|z|<1, the Laurent series of 1z(1−z) is
    1. −1z−1−z−z2−⋯
    2. 1z+1+z+z2+⋯
    3. 1z−1+z−z2+⋯
    4. 1+z+z2+⋯
    Answer and solution

    Answer: B

    For |z|<1, 11−z=1+z+z2+⋯. Dividing by z: 1z+1+z+⋯. The coefficient of 1/z is 1, the residue at 0.

    Why people get this wrong: The alternating signs belong to 1/(1+z).

  12. MCQStandard

    The order of the pole of 1z2sin⁡z at z=0 is
    1. 1
    2. 2
    3. 3
    4. it is an essential singularity
    Answer and solution

    Answer: C

    sin⁡z=z(1−z2/6+⋯) has a simple zero at 0, so z2sin⁡z has a zero of order 3 and its reciprocal a pole of order 3.

    Why people get this wrong: Counting only the visible z2 gives 2.

  13. NATStandard

    The Taylor series of 1z2+4 about z=1 has radius of convergence ______ (to two decimal places).
    Answer and solution

    Answer: 2.24 (±0.01)

    A Taylor series converges out to the nearest singularity. The singularities are z=±2i, both at distance |1−2i|=5≈2.24 from the centre.

    Why people get this wrong: On the real axis the function is perfectly smooth; the complex poles still limit the series.

  14. MCQStandard

    In polar form z=reiθ, the Cauchy-Riemann equations for f=u(r,θ)+iv(r,θ) are
    1. ur=vθ, vr=−uθ
    2. ur=rvθ, vr=−ruθ
    3. ur=−1rvθ, vr=1ruθ
    4. ur=1rvθ, vr=−1ruθ
    Answer and solution

    Answer: D

    Moving a distance dr radially or rdθ round must give the same derivative: f′(z)=e−iθ(ur+ivr)=e−iθir(uθ+ivθ). Equating real and imaginary parts: ur=1rvθ and vr=−1ruθ. Check with ln⁡z=ln⁡r+iθ: ur=1/r=1r⋅1 ✓.

    Why people get this wrong: Dropping the 1/r: an angle is not a length.

  15. MSQStandard

    Which statements are true?
    1. A bounded entire function is constant
    2. Every non-constant polynomial has a zero in ℂ
    3. sin⁡z is bounded on ℂ
    4. |ez|=eRez
    Answer and solution

    Answer: A, B, D

    Liouville's theorem gives the first; applied to 1/p(z) it proves the fundamental theorem of algebra. sin⁡(iy)=isinh⁡y grows without bound, so sin⁡z is not bounded (consistent with Liouville, since it is entire and not constant). |ex+iy|=ex|eiy|=ex.

    Why people get this wrong: |sin⁡x|≤1 on the real line does not survive off it.

  16. NATStandard

    The integral ∮|z−1|=1dzz2−1 (anticlockwise) equals kπi. The value of k is ______.
    Answer and solution

    Answer: 1

    The circle has centre 1 and radius 1, so it encloses z=1 but not z=−1 (distance 2). Write 1z2−1=1/(z+1)z−1; Cauchy's formula gives 2πi⋅11+1=πi, so k=1.

    Why people get this wrong: Including z=−1 as well makes the two contributions cancel and gives 0.

  17. MCQExam level

    The function f(z)=|z|2 is
    1. analytic everywhere
    2. complex-differentiable only at z=0, and analytic nowhere
    3. differentiable nowhere
    4. analytic on the real axis
    Answer and solution

    Answer: B

    u=x2+y2, v=0. CR needs ux=vy: 2x=0, and uy=−vx: 2y=0. Both hold only at the origin, and the partial derivatives are continuous there, so f′(0) exists. Analytic means differentiable in a whole neighbourhood, which fails at every point.

    Why people get this wrong: Differentiable at a point is not the same as analytic at that point.

  18. NATExam level

    f=u+iv is analytic with v=2xy+y and f(0)=0. The value of Ref(2+i) is ______.
    Answer and solution

    Answer: 5

    ux=vy=2x+1 gives u=x2+x+h(y), and uy=h′(y)=−vx=−2y gives h=−y2+C, with C=0 from f(0)=0. So u=x2−y2+x and f=z2+z. At 2+i: (2+i)2+(2+i)=5+5i, real part 5.

    Why people get this wrong: Finding f as a function of z (Milne-Thomson: set y=0, x=z) is quicker than finding u.

  19. MSQExam level

    For f(z)=1z(z−2)2, which statements are true?
    1. z=0 is a simple pole
    2. z=2 is a pole of order 2
    3. The Laurent series about 0 converges in 0<|z|<2
    4. The residue at z=2 is 14
    Answer and solution

    Answer: A, B, C

    The orders of the poles are the orders of the zeros of the denominator: 1 at 0, 2 at 2. A Laurent series about 0 converges out to the next singularity, at distance 2. Residue at 2: ddz(1z)z=2=−14, not +14.

    Why people get this wrong: For the double pole, differentiate 1/z: the derivative brings a minus sign.

  20. NATExam level

    The integral ∮|z|=3zez(z−1)3dz (anticlockwise) equals kπi. The value of k is ______ (to two decimal places).
    Answer and solution

    Answer: 8.15 (±0.02)

    With f=zez: f′=(z+1)ez, f′′=(z+2)ez, so f′′(1)=3e. Then ∮=2πi2!f′′(1)=3eπi and k=3e≈8.15.

    Why people get this wrong: Forgetting the product rule when differentiating zez twice.

  21. MCQExam level

    Which of these functions has a branch point at z=0?
    1. sin⁡zz
    2. e1/z
    3. 1z2
    4. z1/2
    Answer and solution

    Answer: D

    Going once round the origin, z1/2=r1/2eiθ/2 comes back multiplied by eiπ=−1: it does not return to its starting value, which is what a branch point means. The others are single-valued: removable, essential and a double pole respectively.

    Why people get this wrong: An essential singularity like e1/z is wild, but it is single-valued, so it is not a branch point.

  22. MCQExam level

    The singularity of e1/z at z=0 is
    1. removable
    2. a simple pole
    3. essential
    4. a branch point
    Answer and solution

    Answer: C

    e1/z=1+1z+12!z2+13!z3+⋯ has infinitely many negative powers: an essential singularity. Near such a point the function takes every complex value except possibly one (here 0) infinitely often (Picard).

    Why people get this wrong: Along the positive real axis e1/x→∞ like a pole, but along the negative axis it tends to 0: no pole behaves like that.

  23. NATExam level

    The coefficient of z−1 in the Laurent series of z2e1/z about z=0 is ______ (to three decimal places).
    Answer and solution

    Answer: 0.167 (±0.002)

    z2e1/z=z2∑n≥0z−nn!=∑nz2−nn!. The power z−1 needs n=3, with coefficient 1/3!=1/6≈0.167.

    Why people get this wrong: Taking n=1 (the coefficient of 1/z in e1/z itself) ignores the z2 in front.

  24. MCQExam level

    Under w=1/z, the circle |z−1|=1 is mapped to
    1. the line Rew=12
    2. the circle |w−1|=1
    3. the line Imw=12
    4. the line Rew=2
    Answer and solution

    Answer: A

    |z−1|2=1 means zz‾−z−z‾=0. Put z=1/w and multiply by ww‾: 1−w‾−w=0, i.e. Rew=12. The circle passes through z=0, which goes to w=∞, so its image is a line. (z=2 goes to w=12 ✓.)

    Why people get this wrong: Circles through the origin become lines under inversion, not circles.

  25. NATExam level

    The maximum value of |z2+2z| on the closed disc |z|≤1 is ______.
    Answer and solution

    Answer: 3

    By the maximum modulus principle the maximum is on the boundary |z|=1. There |z2+2z|=|z||z+2|=|z+2|≤3, with equality at z=1.

    Why people get this wrong: Checking only the centre (value 0) or a random interior point.

  26. MSQExam level

    Let f(z)=sin⁡zz for z≠0 and f(0)=1. Which statements are true?
    1. f is entire
    2. f has a Taylor series about 0 that converges for every z
    3. |f(z)|≤1 for every complex z
    4. f has zeros only at z=nπ, n=±1,±2,…
    Answer and solution

    Answer: A, B, D

    The singularity at 0 is removable, and f=∑(−1)nz2n/(2n+1)! converges everywhere: f is entire. Zeros of sin⁡z are exactly nπ (all real), and n=0 is removed by the division. But f(iy)=sinh⁡y/y, which exceeds 1 for y≠0, so the bound fails off the real axis (it must, by Liouville).

    Why people get this wrong: Bounds that hold on the real line rarely hold in the complex plane.

  27. MCQExam level

    The integral ∮|z|=1z‾dz, taken anticlockwise, equals
    1. 0, by Cauchy's theorem
    2. −2πi
    3. π
    4. 2πi
    Answer and solution

    Answer: D

    z‾ is not analytic, so Cauchy's theorem does not apply. On the unit circle z‾=1/z, so the integral equals ∮dz/z=2πi. (By Green's theorem, ∮z‾dz=2i×area=2πi.)

    Why people get this wrong: Cauchy's theorem needs analyticity; z‾ fails Cauchy-Riemann everywhere.

  28. NATExam level

    The value of Im∫01+iz2dz, along any path, is ______ (to three decimal places).
    Answer and solution

    Answer: 0.667 (±0.003)

    z2 is entire, so the integral depends only on the end points: [z33]01+i=(1+i)33=−2+2i3. Imaginary part 23≈0.667.

    Why people get this wrong: (1+i)3=(2i)(1+i)=−2+2i; slipping a sign gives −2/3.

  29. MCQExam level

    The function f(z)=z‾2 is
    1. analytic in the whole plane
    2. complex-differentiable nowhere
    3. complex-differentiable only at z=0, and analytic nowhere
    4. complex-differentiable on the whole real axis
    Answer and solution

    Answer: C

    f=(x−iy)2=x2−y2−2ixy, so u=x2−y2, v=−2xy. Cauchy-Riemann: ux=vy gives 2x=−2x, so x=0; uy=−vx gives −2y=2y, so y=0. Both hold only at the origin (and the partials are continuous), so f is differentiable at z=0 only. Analytic means differentiable on a whole neighbourhood, which fails everywhere.

    Why people get this wrong: Differentiable at a point and analytic at a point are different: analyticity needs an open set.

  30. MCQExam level

    The Möbius map w=z−iz+i sends the upper half-plane Imz>0 onto
    1. the open unit disc |w|<1
    2. the region |w|>1
    3. the right half-plane Rew>0
    4. the upper half-plane Imw>0
    Answer and solution

    Answer: A

    |w|=|z−i|/|z+i| is the ratio of the distances from z to i and to −i. A point in the upper half-plane is closer to i than to −i, so |w|<1; the real axis (equal distances) goes to |w|=1. Check one point: z=i goes to w=0, the centre of the disc.

    Why people get this wrong: Swapping numerator and denominator maps the upper half-plane outside the circle.

← All topics · Timed mock test →