Central forces, orbits and Kepler's laws
Mechanics and properties of matter · 9 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQExam level
For an attractive central force (), circular orbits are stable against small radial disturbances when- for every
Answer and solution
Answer: A
Stability needs a minimum of : . With this works out as , i.e. , so . Gravity () and springs () pass; is the borderline.Why people get this wrong: would rule out nothing between and , which are in fact stable.
-
MCQHard
Suppose a particle moved under an attractive force . Circular orbits- are possible at every radius, each stable
- are impossible
- obey
- are possible only for one value of (at any radius), and are not stable: a small push sends the particle spiralling in or out
Answer and solution
Answer: D
Circular orbit: , so , the same at every radius. The effective potential is , which has no minimum: for it is flat, otherwise it falls towards or . So the orbit is not stable ( is the borderline of the rule). -
MSQHard
For which of these central potentials is every bounded orbit closed?- with
Answer and solution
Answer: A, B
Bertrand's theorem: among central forces, only the inverse-square force and the linear (Hooke) force give closed orbits for all bounded motions. The term in D changes the ratio of radial and angular frequencies, so the ellipse precesses into a rosette. C gives no stable bound orbits at all. -
MCQHard
For a nearly circular orbit in an attractive force , the ratio of the radial oscillation frequency to the orbital angular frequency is . For an isotropic spring force , the ratio isAnswer and solution
Answer: C
With , : the radius goes in and out twice per revolution, which is exactly an ellipse centred on the force centre. For gravity, gives 1: one in-and-out per revolution, an ellipse with the centre at a focus. -
MCQHard
In Rutherford scattering of alpha particles by a nucleus, the differential cross-section varies with the scattering angle asAnswer and solution
Answer: B
For a potential the impact parameter is with the head-on distance of closest approach. Then . Large angles are rare but far more common than a "plum pudding" atom allows. -
NATHard
A particle moves under the isotropic force on an ellipse centred at the origin with semi-axes 3 m and 1 m. The ratio of its greatest speed to its least speed is ______.Answer and solution
Answer: 3
Each Cartesian component is simple harmonic with the same : , . Then , greatest (at the ends of the minor axis) and least . Ratio . (Angular momentum check: , and at the ends of the axes , so .)Why people get this wrong: For a spring force the speed is greatest at the ends of the short axis, not the long one.
-
NATTop rank
A particle moves on a nearly circular orbit under an attractive force . The angle (in degrees) swept between a closest point and the next farthest point (the apsidal angle) is ______.Answer and solution
Answer: 254.56 ° (±0.5)
Small radial oscillations have frequency for . From closest to farthest point takes half a radial period, during which the angle advances . With : rad . Since this is not a rational fraction of the orbit never closes.Why people get this wrong: Using or forgetting that the apsidal angle is half the radial period.
-
MCQTop rank
A small body is released from rest at distance from a point mass (and nothing else acts). The time it takes to fall to the centre isAnswer and solution
Answer: B
Think of the straight fall as the limit of a very thin ellipse (eccentricity → 1) whose far end is at and whose focus is at the centre. Its semi-major axis is . Falling in is half an orbit, so . Kepler's third law does the integral for you.Why people get this wrong: Taking instead of : the degenerate ellipse spans from 0 to .