U-law to WAV: play and convert .ulaw, .alaw and .sln phone recordings

Open raw .ulaw, .alaw and .sln files from Asterisk and other phone systems, or u-law and A-law WAVs, listen to them and save a normal 16-bit WAV. Nothing is uploaded.

Keep it one tap away for everyday use.

Bookmark U-law to WAV?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Open file
  2. Listen
  3. Save WAV
Nothing is uploadedWorks offline once open
.ulaw, .alaw, .sln, .au, .pcm or WAV. Or drop them here. Up to 50 files, 200 MB each. They stay on this device.

WAV and .au files say how they are coded. Raw files have no header, so the name decides (.ulaw is u-law, .alaw is A-law, .sln is 16-bit, .sln16 is 16 kHz). For any other name, or if one sounds like noise, set it here:

Saves a 16-bit PCM WAV at the recording's own sample rate, which every player and editor opens.

What it does

Phone systems keep voicemail, call recordings and menu prompts in formats that ordinary players will not open: a raw .ulaw or .alaw file has no header at all, just one byte per sample of 8 kHz G.711 sound, and many media players refuse a WAV with u-law inside. This tool decodes those files in your browser so you can listen to them, and saves each one as a standard 16-bit WAV that every player, editor and transcription app opens. Call recordings are private, so nothing is uploaded: the files never leave your device.

It reads raw u-law, raw A-law, raw 16-bit signed linear (.sln, .sln16 and others), Sun .au files and WAVs coded as u-law, A-law, PCM or floating point. To make phone files from your own sound, go the other way with MP3 to u-law or WAV to u-law; to cut a recording down, open the WAV in the audio trimmer.

How to use it

  1. Press Open phone recordings and choose one or more files (or drop them on the box).
  2. Press Play to listen.
  3. Press Download WAV, or Download all as a ZIP for several.

What each setting does

  • Raw files are: how a file with no header is coded. “Guess from the name” uses the extension: .ulaw, .ul, .mu and .pcm are u-law (.pcm is u-law in Asterisk); .alaw and .al are A-law; .sln and .raw are 16-bit. If a file sounds like loud hiss, it is probably the other law: switch and it is read again.
  • Raw file sample rate: raw files do not record their speed. Phone audio is 8,000 Hz. If a voice sounds like a chipmunk or very slow, try 16,000 Hz.

WAV and .au files carry their own settings, so these two choices do not change them.

Worked example

Asterisk saves a 45-second voicemail as msg0001.ulaw: 45 × 8,000 = 360,000 bytes. Opened here it is read as raw u-law at 8,000 Hz and shown as 45 seconds, mono. The WAV it saves holds 16-bit samples, so it is 360,000 × 2 + 44 = 720,044 bytes.

FAQs

Why is the WAV bigger than the .ulaw file? u-law squeezes each sample into 8 bits; a normal WAV stores 16. The sound is the same; there is just more room per sample.

Will it sound better as WAV? No. Phone audio stops at about 3.4 kHz, and converting cannot bring back what the call did not carry. It only makes the file easier to open.

Can it read .gsm or .g729 files? Not yet; those codecs need their own decoders. Most PBXs can be set to record in u-law (wav49 and gsm are the usual alternatives).

Is anything uploaded? No. Everything happens in your browser on this device.

Where the numbers come from

  • ITU-T Recommendation G.711 (1988), decoding as in the public-domain Sun Microsystems g711.c reference and checked against ffmpeg for all 256 codes. Sun/NeXT .au header and Microsoft RIFF WAV layouts; Asterisk file names (.ulaw, .alaw, .sln, .sln16) from the Asterisk documentation, checked 2026-11-16.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-16.

Change log for U-law to WAV

  1. Add phone audio converters, tone generator and voice recorder (#T955-#T959) Details on GitHub

Every change to fibub

Related tools