Phase checker: stereo phase correlation and mono compatibility check

Check a mix for phase problems: correlation over time, a goniometer, correlation by band, how much quieter it gets in mono, left/right balance and flagged out-of-phase moments. Listen in stereo, mono or side only. Nothing is uploaded.

Keep it one tap away for everyday use.

Bookmark Phase checker?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Open mix
  2. Check
  3. Listen
Nothing is uploadedWorks offline once open
Or drop it here. WAV, FLAC, MP3, M4A, OGG, up to 500 MB. It stays on this device.

What it does

Stereo tricks such as wideners, flipped cables or two microphones at different distances can make parts of a mix cancel when left and right are added together. That happens more than you might think: phone speakers, club sound systems with mono subs and some radios play mono. This tool shows where a mix is at risk and lets you hear what drops out. It runs in your browser, so your mix is never uploaded.

Before mastering, fix what it finds, then go on to track mastering; to see which frequencies are involved, use the audio spectrum analyser.

How to use it

  1. Press Open a mix and choose a stereo file.
  2. Read the summary, the correlation graph and the flagged moments.
  3. Press a flagged time to jump there, and switch between Stereo, Mono and Side only while it plays.

What each reading means

  • Correlation: +1 means both speakers get the same sound (mono), 0 means unrelated sound (very wide), and −1 means one side is flipped. Most mixes sit between +0.2 and +0.8.
  • Mono loss: how many dB quieter the mix gets in mono, by BS.1770 loudness. “Silent in mono” means it cancels completely.
  • Balance: which side is louder, and by how much.
  • Side vs mid: the level of the difference signal against the sum.
  • Goniometer: mid up, side across. A tall shape is safe; a flat shape cancels.
  • By band: correlation below 250 Hz, from 250 Hz to 4 kHz and above 4 kHz. Bass should be close to +1.

Worked example

A 4-second test tone is the same in both channels except from 2 to 3 seconds, where the right side is flipped. The whole-track correlation is (3 − 1) ÷ 4 = +0.50, the flagged list shows 0:02.0 to 0:03.0 at −1.00, and side vs mid is 10 log(1/3) = −4.8 dB. With the right channel flipped for the whole file, it reads −1.00 and “silent in mono”.

FAQs

Is a negative correlation always wrong? Short dips on reverb tails or wide effects can be fine. Long stretches, or negative bass, usually mean a polarity or timing problem.

Does it work on mono files? A mono file cannot cancel, so it says so.

Where the numbers come from

  • Correlation is the Pearson correlation of left and right in 100 ms windows. Mono loss compares ITU-R BS.1770-4 integrated loudness of the stereo mix and its mono fold-down, (L+R)/2. Bands split with second-order Butterworth filters (Audio EQ Cookbook) at 250 Hz and 4 kHz. Drawings are fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-18.

Change log for Phase checker

  1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
  2. Phase checker (#T1043) Details on GitHub

Every change to fibub

Related tools

Audio spectrum analyser #T675 See the frequencies in a sound: a live spectrum and scrolling spectrogram from your microphone, or the averaged spectrum of an audio file, with the strongest peaks found to a fraction of a hertz and named as musical notes. Choose the FFT size and window, and download the spectrum as CSV. The sound stays on your device. Track mastering #T1017 Master a finished mix in your browser: gentle tone EQ, glue compression, stereo width and a true-peak limiter that lands on −14, −16, −23 LUFS or a loud club level. Compare before and after at matched loudness, then save WAV or MP3. Nothing is uploaded. LUFS meter #T1036 Watch loudness live in LUFS (ITU-R BS.1770, EBU R 128): momentary, short-term, integrated, loudness range and true peak, with a scrolling graph and −14 and −23 target lines. Measure a microphone, a browser tab's sound or a file. A/B compare #T1044 Load your mix and up to 3 reference tracks, match their loudness automatically (ITU-R BS.1770), switch between them in sync with keys 1 to 4, loop a part, run a blind test and compare spectra, LUFS, range, true peak, correlation and crest factor. Nothing is uploaded. Stem splitter #T1014 Split a song into vocals and instrumental, drums and melodic parts, or bass and the rest with classic signal maths. Preview each stem with solo and mute, save WAV or MP3. Nothing is uploaded. Pitch editor #T1019 Open a solo vocal or instrument, see every note on a piano roll, snap the notes to a key with a strength and retune time, or drag single notes up and down. Compare before and after, then save a WAV of the same length. Nothing is uploaded.