EQ guide: frequency chart with instrument ranges, EQ bands and what to cut or boost

A frequency chart from 20 Hz to 20 kHz showing EQ bands and where common instruments sit, with plain advice for each band, note names and a test tone.

Keep it one tap away for everyday use.

Bookmark EQ guide?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Tap chart
  2. Read
  3. Hear it
Nothing is uploadedWorks offline once open

Tap or click the chart to pick a frequency. Solid bars are fundamentals; lighter extensions are harmonics.

    These are starting points, trust your ears. Small moves of 1 to 3 dB are usually enough.

    Starts quiet. Turn your volume down before you press play; low and high tones can be hard to judge by ear and small speakers cannot play the lowest ones.

    Where instruments sit

    More options: sources for the ranges

      What it does

      This is a map of the sound spectrum from 20 Hz to 20 kHz on a log axis, the way we hear pitch: each octave gets the same width. Seven coloured bands (sub, bass, low mids, mids, upper mids, presence, air) are marked, and bars show where common instruments sit: the solid part is the lowest and highest note it plays (the fundamentals), the lighter part is the overtones (harmonics) above it.

      Tap the chart to choose a frequency. You get the nearest note name, the band it is in and a few common moves in plain words, such as cutting mud or adding air. They are starting points, trust your ears. To see a real recording on the same scale, use the audio spectrum analyser, and to hear a pure tone at any pitch use the tone generator.

      How to use it

      1. Tap or click anywhere on the chart, or type a frequency in hertz.
      2. Read the band, the note and the suggestions below the chart.
      3. Press Play tone to hear that frequency. It starts quiet; use the volume slider.
      4. Open More options to see where each instrument range comes from.

      What each part does

      • Bands: groups of frequencies with a common character. Edges vary between books, so treat them as guides.
      • Solid bars: note range of an instrument, or a rough typical range for drums.
      • Light bars: harmonics, which give an instrument its tone, up to a limit this page chooses.
      • Nearest note: from f = 440 x 2^((n-69)/12), with the offset in cents.

      Worked example

      Tap 440 Hz. The note is A4 with 0 cents, the band is Low mids and the page lists several instruments, including vocals, guitar and piano, as reaching it. Tap near 250 Hz and the advice is about low-mid mud: a gentle dip around 250 to 400 Hz often clears a crowded mix.

      FAQs

      Are the instrument ranges exact? Piano, bass, guitar and voice ranges are standard note ranges converted to hertz. Drum ranges are rough typical values and change with the drum, tuning and mic.

      Which cut or boost should I use? None is right every time. Make small moves, compare at the same volume, and trust your ears.

      Why does the tone sound quiet or missing at 20 to 40 Hz? Many phone and laptop speakers cannot play it. Try headphones, at low volume.

      Is anything uploaded? No, it all runs in your browser.

      Where the numbers come from

      • Note names and frequencies use equal temperament with A4 = 440 Hz: f = 440 x 2^((n-69)/12), n the MIDI note number (MIDI Manufacturers Association). Instrument ranges for piano (A0 to C8), bass guitar (E1 to G4), guitar (E2 to E6) and voice (E2 to C6) are standard note ranges converted to Hz. Kick, snare, hi-hat and cymbal ranges are rough typical ranges, not measurements. Band edges follow common mixing practice and different books use slightly different edges. Harmonics are drawn up to a simple fixed limit per instrument. Checked 2026-11-18.

      Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

      Last updated 2026-11-18.

      Change log for EQ guide

      1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
      2. Split sheet, EQ guide, Song planner, Drum sketcher Details on GitHub

      Every change to fibub

      Related tools

      Audio spectrum analyser #T675 See the frequencies in a sound: a live spectrum and scrolling spectrogram from your microphone, or the averaged spectrum of an audio file, with the strongest peaks found to a fraction of a hertz and named as musical notes. Choose the FFT size and window, and download the spectrum as CSV. The sound stays on your device. Tone generator #T958 Play or download a pure tone at any frequency, a sweep, white or pink noise, DTMF keypad tones or dial, ringing and busy signals, as WAV or u-law for phone systems. Made on your device. Track mastering #T1017 Master a finished mix in your browser: gentle tone EQ, glue compression, stereo width and a true-peak limiter that lands on −14, −16, −23 LUFS or a loud club level. Compare before and after at matched loudness, then save WAV or MP3. Nothing is uploaded. Note chart #T1038 A table of every note from C-1 to G9 with its MIDI number, frequency in Hz, period, wavelength in air and piano key. Search by name, MIDI number or Hz, tap to hear a note, and download it as a CSV. Stem splitter #T1014 Split a song into vocals and instrumental, drums and melodic parts, or bass and the rest with classic signal maths. Preview each stem with solo and mute, save WAV or MP3. Nothing is uploaded. Pitch editor #T1019 Open a solo vocal or instrument, see every note on a piano roll, snap the notes to a key with a strength and retune time, or drag single notes up and down. Compare before and after, then save a WAV of the same length. Nothing is uploaded.