What it does
A delay that repeats in time with the music sounds tight; one that does not sounds like a mistake. This tool turns a speed in beats per minute (BPM) into the delay time in milliseconds (ms) for every note value from a whole note down to a 64th, in straight, dotted and triplet versions. Type the BPM or tap it in time with the track, then copy a single time or the whole table into your delay plug-in.
It also gives starting points for reverb pre-delay (the gap before the reverb starts), reverb decay (so the tail ends on a beat or at the bar line) and compressor attack and release that sit with the groove. These are starting points, not rules. Find a steady speed with the metronome, then use the LFO rates for modulation at the same tempo, and the room acoustics calculator tool to see how a real room decays.
How to use it
- Type the BPM, or press Tap tempo several times in time with the music.
- Read the table: rows are note values, columns are straight, dotted and triplet. Tap a time to copy it.
- Press Copy table to copy everything as tab-separated text for a spreadsheet or notes.
- Open More options for the same times in samples at 44.1 kHz and 48 kHz.
What each part does
- Straight, dotted, triplet: dotted is one and a half times as long, triplet is two thirds as long.
- Pre-delay: the time between the dry sound and the start of the reverb. A short one (a 1/64 or 1/128 note) keeps the sound clear.
- Decay: how long the tail lasts. Choosing a length equal to a 1/4 note, 1/2 note or bar makes the tail finish on the grid.
- Attack and release: how fast a compressor grabs and lets go. Short attacks catch the hit; the release should finish before the next hit you want untouched.
Worked example
At 120 BPM a quarter note is 500 ms. A dotted eighth is 375 ms, and an eighth triplet is 166.67 ms. A 1/64 pre-delay is 31.25 ms, and a one-bar decay in 4/4 is 2,000 ms. At 44.1 kHz 500 ms is 22,050 samples.
FAQs
Why does the answer differ from my plug-in? Some plug-ins round to whole milliseconds or show a different note name. Use the nearest value and listen.
Should the reverb tail really end on the beat? Not always. It is a way to keep a mix tidy at fast tempos. If it sounds better longer, make it longer.
Does it work offline? Yes. Nothing you type leaves your device.
Where the numbers come from
- Note lengths follow from the tempo: a quarter note lasts 60,000 / BPM milliseconds, and a dotted note is 1.5 times and a triplet two thirds of the straight note. Pre-delay, decay, attack and release values are common mixing starting points, not standards. Checked 2026-11-18.
Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.
Last updated 2026-11-18.